Very High Speed Counter Module - Esco Drives & Automation
Very High Speed Counter Module - Esco Drives & Automation
Very High Speed Counter Module - Esco Drives & Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 4<br />
Configuring Your <strong>Very</strong> <strong>High</strong> <strong>Speed</strong> <strong>Counter</strong><br />
<strong>Module</strong><br />
This chapter describes how to configure your <strong>Very</strong> <strong>High</strong> <strong>Speed</strong><br />
<strong>Counter</strong> modules with RSNetworx.<br />
For more information about:<br />
See page:<br />
Configuration Overview 4-1<br />
Adding the Adapter to Your Network 4-1<br />
Adding I/O <strong>Module</strong>s to Your Network 4-2<br />
Setting the <strong>Counter</strong>’s Parameters 4-4<br />
Checking I/O Status and Viewing/Editing<br />
4-6<br />
the EDS File<br />
Configuration Overview<br />
You must use the RSNetworx for DeviceNet software to configure<br />
your module. You can configure the module while it is:<br />
• online<br />
or<br />
• offline<br />
This chapter shows configuration in the online mode. Configuration<br />
screens appear similar in both modes. The primary difference is that if<br />
you make changes offline, you must go online before the<br />
configuration changes take effect.<br />
Adding the Adapter to Your Network<br />
Follow these steps:<br />
1. Start the RSNetworx for DeviceNet software.<br />
1 Publication 1734-UM003A-EN-P - August 2000
Change language