Very High Speed Counter Module - Esco Drives & Automation

More documents

Recommendations

Info

1-14 About the Very High Speed Counter Modules Publication 1734-UM003A-EN-P - August 2000
Chapter 2 Installing the Very High Speed Counter Module General The 1734-VHSC is a two-module set. Module 1 houses the 1734-VHSC functionality while module 2 provides screw terminals necessary to access chassis ground (Chas Gnd) and common (C). Module 2 also connects terminal 4 to 5 and terminal 6 to 7 for ease of wiring power to the input device. Module 2 is not necessary for VHSC functionality but eases customer wiring. Module 2 does not use a node address, and it doesn’t consume power from the PointBus. To reduce loop area, place module 2 adjacent (either side) to module 1 Installing the Mounting Base/ Wiring Base Assembly The wiring base assembly (1734-TB or -TBS) consists of a mounting base (cat. no. 1734-MB) and a removable terminal block (cat. no. 1734-RTB or -RTBS). You can install the assembly, or just the mounting base. To install the mounting base/wiring base assembly on the DIN rail, proceed as follows. 1. Position the mounting base/wiring base assembly vertically above the installed units (adapter, power supply or existing module). 2. Slide the mounting base down allowing the interlocking side pieces to engage the adjacent module or adapter. 1 Publication 1734-UM003A-EN-P - August 2000
Page 1 and 2: Very High Speed Counter Module Cat.
Page 3 and 4: Preface Purpose of This Manual This
Page 5 and 6: Preface 3 Definitions The following
Page 7 and 8: Table of Contents Important User In
Page 9 and 10: Chapter 1 About the Very High Speed
Page 11 and 12: About the Very High Speed Counter M
Page 21: About the Very High Speed Counter M
Page 25 and 26: 0 1 2 3 Installing the Very High Sp
Page 27 and 28: Installing the Very High Speed Coun
Page 29 and 30: Chapter 3 Very High Speed Counter M
Page 31 and 32: Very High Speed Counter Module Inpu
Page 41 and 42: Chapter 4 Configuring Your Very Hig
Page 43 and 44: Configuring Your Very High Speed Co
Page 49 and 50: Chapter 5 Accessing Instantiated In
Page 51 and 52: Accessing Instantiated Instances 5-
Page 53 and 54: Chapter 6 Troubleshooting with the
Page 55 and 56: Appendix A Specifications Specifica
Page 57 and 58: Specifications A-3 Input Derating C
Page 59 and 60: Index A active features per mode 1-
Page 61 and 62: Allen-Bradley Publication Problem R
Page 64: Back Cover Publication 1734-UM003A-

Very High Speed Counter Module - Esco Drives & Automation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?