HP Archive Backup System for OpenVMS Guide to Operations
HP Archive Backup System for OpenVMS Guide to Operations HP Archive Backup System for OpenVMS Guide to Operations
Prev3 Support C.2 Using SLS as the Client for ABS/MDMS C.2.1.1 Processes Existing on the System after the Logical is Set SLS/MDMS 2.9* code stream: SLS$TAPMGRRQ SLS$TAPMGRUT Seen at product startup and midnight processing SLS$OPCOM C.2.1.2 ABS/MDMS 3.*,4.* code stream: MDMS$SERVER Can be database server or client process ABS$COORD_CLEAN ABS$POLICY 3.* ABS process Examining the RDF Settings Since SLS has started later TTI_RDEV definition will be as follows: $ SHOW LOG TTI_RDEV "TTI_RDEV" = "SLS$ROOT:[TTI_RDEV]" (LNM$SYSTEM_TABLE) In case you want to use the RDF in ABS/MDMS environment, comment out the following lines in SLS$SYSTEM:LOADER.COM: $ @SLS$SYSTEM:SLS$START_RDF $ if (.not. $status) $ then $ tapestart_log = "SLS$ROOT:[000000]TAPESTART''F$GETSYI("NODENAME")'.LOG" $ request "RDF startup failed during SLS startup. See ''tapestart_log' log $ endif Also, comment out the following lines written for RDF shutdown in SLS$SYSTEM:SHUT- DOWN.COM: $SHUT_RDF: $ CTX = "" $ I = F$CONTEXT("PROCESS",CTX,"PRCNAM","--RDserver--","EQL") $ PID = F$PID(CTX) $ If (PID .nes. "") Then @TTI_RDEV:RDSERVER_SHUTDOWN $! $ WAIT 00:00:10 C–4 Prev3 Support
Prev3 Support C.2 Using SLS as the Client for ABS/MDMS $ CTX = "" $ I = F$CONTEXT("PROCESS",CTX,"PRCNAM","--RDserver--","EQL") $ PID = F$PID(CTX) $ If (PID .eqs. "") $ then $ CTX = "" $ I = F$CONTEXT("PROCESS",CTX,"PRCNAM","--RDclient--","EQL") $ PID = F$PID(CTX) $ If (PID .nes. "") Then @TTI_RDEV:RDCLIENT_SHUTDOWN $ endif C.2.1.3 Supported STORAGE Commands Following are the Storage commands that are supported even after the SLS/MDMS V2.x to ABS/MDMS V4.x conversion: • Show Commands (SHOW VOLUME, SHOW MAGAZINE, SHOW JUKE, SHOW VER- SION) • BIND/UNBIND commands • ADD (ADD MAGAZINE, ADD VOLUME) commands • SET (SET VOLUME) commands Prev3 Support C–5
- Page 209 and 210: Table B-1 SBK Symbols in ABS Termin
- Page 211 and 212: Migrating from SLS/MDMS V2.X to ABS
- Page 213 and 214: Migrating from SLS/MDMS V2.X to ABS
- Page 215 and 216: Migrating from SLS/MDMS V2.X to ABS
- Page 217 and 218: Migrating from SLS/MDMS V2.X to ABS
- Page 219 and 220: Migrating from SLS/MDMS V2.X to ABS
- Page 221 and 222: Migrating from SLS/MDMS V2.X to ABS
- Page 223 and 224: Migrating from SLS/MDMS V2.X to ABS
- Page 225 and 226: Migrating from SLS/MDMS V2.X to ABS
- Page 227 and 228: Migrating from SLS/MDMS V2.X to ABS
- Page 229 and 230: Migrating from SLS/MDMS V2.X to ABS
- Page 231 and 232: Migrating from SLS/MDMS V2.X to ABS
- Page 233 and 234: Migrating from SLS/MDMS V2.X to ABS
- Page 235 and 236: Migrating from SLS/MDMS V2.X to ABS
- Page 237 and 238: Migrating from SLS/MDMS V2.X to ABS
- Page 239 and 240: Migrating from SLS/MDMS V2.X to ABS
- Page 241 and 242: Migrating from SLS/MDMS V2.X to ABS
- Page 243 and 244: $ WRITE EpilogComFile - Migrating f
- Page 245 and 246: Table B-6 Execution Environment Par
- Page 247 and 248: • SAVE Migrating from SLS/MDMS V2
- Page 249 and 250: Migrating from SLS/MDMS V2.X to ABS
- Page 251 and 252: Migrating from SLS/MDMS V2.X to ABS
- Page 253 and 254: Migrating from SLS/MDMS V2.X to ABS
- Page 255 and 256: Solution - Follow these steps: Migr
- Page 257 and 258: C Prev3 Support Prev3 Support is pr
- Page 259: Prev3 Support C.2 Using SLS as the
- Page 264 and 265: Upgrading from ABS V2.X/V3.X to V4.
- Page 266 and 267: Upgrading from ABS V2.X/V3.X to V4.
- Page 268 and 269: ABS/MDMS Support for Fibre Channel
- Page 270 and 271: ABS/MDMS Support for Fibre Channel
- Page 273 and 274: Index Numerics 100 times per day 3-
- Page 275 and 276: MDMS$SBT_ ARCHIVE_n 9-20 MDMS$SBT_
- Page 277: volumes 3-4 W WARNING 3-14, 3-31 WE
Prev3 Support<br />
C.2 Using SLS as the Client <strong>for</strong> ABS/MDMS<br />
C.2.1.1<br />
Processes Existing on the <strong>System</strong> after the Logical is Set<br />
SLS/MDMS 2.9* code stream:<br />
SLS$TAPMGRRQ<br />
SLS$TAPMGRUT Seen at product startup and midnight processing<br />
SLS$OPCOM<br />
C.2.1.2<br />
ABS/MDMS 3.*,4.* code stream:<br />
MDMS$SERVER Can be database server or client process<br />
ABS$COORD_CLEAN<br />
ABS$POLICY 3.* ABS process<br />
Examining the RDF Settings<br />
Since SLS has started later TTI_RDEV definition will be as follows:<br />
$ SHOW LOG TTI_RDEV<br />
"TTI_RDEV" = "SLS$ROOT:[TTI_RDEV]" (LNM$SYSTEM_TABLE)<br />
In case you want <strong>to</strong> use the RDF in ABS/MDMS environment, comment out the following lines<br />
in SLS$SYSTEM:LOADER.COM:<br />
$ @SLS$SYSTEM:SLS$START_RDF<br />
$ if (.not. $status)<br />
$ then<br />
$ tapestart_log = "SLS$ROOT:[000000]TAPESTART''F$GETSYI("NODENAME")'.LOG"<br />
$ request "RDF startup failed during SLS startup. See ''tapestart_log'<br />
log<br />
$ endif<br />
Also, comment out the following lines written <strong>for</strong> RDF shutdown in SLS$SYSTEM:SHUT-<br />
DOWN.COM:<br />
$SHUT_RDF:<br />
$ CTX = ""<br />
$ I = F$CONTEXT("PROCESS",CTX,"PRCNAM","--RDserver--","EQL")<br />
$ PID = F$PID(CTX)<br />
$ If (PID .nes. "") Then @TTI_RDEV:RDSERVER_SHUTDOWN<br />
$!<br />
$ WAIT 00:00:10<br />
C–4 Prev3 Support