HP Archive Backup System for OpenVMS Guide to Operations

Migrating from SLS/MDMS V2.X to ABS/MDMS V4.X
B.2 SLS/MDMS V2.x to ABS/MDMS V4.x Migration
$ ! Original SBK DAYS parameter TUESDAY
$ ! is equivalent to Scheduler qualifiers:
$ ! /START="05:00:00"
$ ! /DAYS=(TUESDAY)
$ ! /INTERVAL="NONE"
$ !--------------------------------------------------------
$ ! Create Prolog Command File
$ ! This command file should be integrated with the Execution Environment's
Prolog Command file. It will be executed prior to the ABS job, and define the
Load Timeout parameters, as well as the SLS symbols which might be used in
the customer's prolog and epilog commands.
$ ! Comments:
$ ! QUICKLOAD_RETRIES converted to ABS$_LOAD_TIMEOUT
$ ! Used estimate of 20 seconds per retry for conversion
$ !
$ OPEN/WRITE PrologComFile ABS$SLS_CONVERSION:SLS_ABS_Example_ABS_PROLOG.COM
$ WRITE PrologComFile -
"$ DEFINE/JOB ABS$1_LOAD_TIMEOUT 1600"
$ WRITE PrologComFile -
"$ @ABS$SLS_CONVERSION:SLS_SYMBOLS.COM"
$ WRITE PrologComFile "$ EXIT"
$ Close PrologComFile
$ ! End of Prolog Command File Creation
$ !--------------------------------------------------------
$ ! Create the Epilog Command File
$ ! This Epilog Command File should be integrated with the Environment's Epilog
command file. This will be executed after the ABS Save Request completes,
and will issue appropriate STORAGE commands to set such volume
attributes as NOTES, ONSITE_DATE, and OFFSITE date.
$ ! Comments:
$ ! Only TAPE_LABELS = 3 is supported
$ ! Setting TAPE_LABELS to 3 (print labels after job)
$ !
$ OPEN/WRITE EpilogComFile ABS$SLS_CONVERSION:SLS_ABS_Example_ABS_EPILOG.COM
B–38 Migrating from SLS/MDMS V2.X to ABS/MDMS V4.X