HP Archive Backup System for OpenVMS Guide to Operations
HP Archive Backup System for OpenVMS Guide to Operations
HP Archive Backup System for OpenVMS Guide to Operations
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Migrating from SLS/MDMS V2.X <strong>to</strong> ABS/MDMS V4.X<br />
B.2 SLS/MDMS V2.x <strong>to</strong> ABS/MDMS V4.x Migration<br />
Object Attribute Description/Verification<br />
Slot count<br />
Usage<br />
You need <strong>to</strong> set the slot count manually. The conversion program<br />
cannot identify the number of slots and provides the available<br />
number directly without verification.<br />
Ensure that the usage is appropriately set <strong>for</strong> the type of jukebox<br />
that you have as the conversion program cannot identify<br />
whether a jukebox does/does not use a magazine. If the jukebox<br />
uses magazine, then you have <strong>to</strong> manually configure the jukebox<br />
<strong>to</strong> include the magazine usage. The default setting is<br />
“NOMAGAZINE”.<br />
Magazine Description Ensure that you provide the appropriate description <strong>for</strong> the<br />
magazine after the conversion is completed. By default, the<br />
description is not provided during the conversion.<br />
Offsite location<br />
Offsite date<br />
Onsite location<br />
Offsite date<br />
The old magazine record does not have an offsite location. So,<br />
you need <strong>to</strong> provide the appropriate offsite location.<br />
The old magazine record does not have an offsite date. So, you<br />
need <strong>to</strong> provide the appropriate offsite date.<br />
The old magazine record does not have an onsite location. So,<br />
you need <strong>to</strong> provide the appropriate onsite location.<br />
The old magazine record does not have an offsite date. So you<br />
need <strong>to</strong> provide the appropriate offsite date.<br />
Node Description Ensure that you provide the appropriate description <strong>for</strong> the<br />
node(s) after the conversion is completed. By default, the<br />
description is not provided during the conversion.<br />
DECnet-Plus<br />
fullname<br />
TCP/IP<br />
fullname<br />
Disabled<br />
Database server<br />
The conversion program does not provide the DECnet-Plus<br />
fullname as the node’s TAPESTART.COM does not support<br />
DECnet-Plus. If the node on which the conversion is completed<br />
uses DECnet-Plus, then you need <strong>to</strong> provide the appropriate<br />
DECnet-Plus fullname.<br />
The conversion program does not provide the TCP/IP fullname<br />
as the node’s TAPESTART.COM does not support TCP/IP. If<br />
the node on which the conversion is completed uses TCP/IP,<br />
then you need <strong>to</strong> provide the appropriate TCP/IP fullname.<br />
The conversion program sets the “DISABLED” attribute <strong>to</strong><br />
“NO”, inturn enabling access <strong>to</strong> the node. Ensure that you want<br />
the particular node <strong>to</strong> be enabled.<br />
If the “DATABASE SERVER” attribute is set <strong>to</strong> “YES”, then<br />
the node on which the conversion is completed has the potential<br />
<strong>to</strong> become a database server.<br />
The logical MDMS$DATABASE_SERVERS must have the<br />
particular node name in its definition of nodes, in the domain<br />
object. This definition is defined in<br />
SYS$STARTUP:MDMS$SYSTARTUP.COM.<br />
Location<br />
Ensure that this is the location that the node belongs <strong>to</strong>. During<br />
the conversion, it might have been changed depending on the<br />
TAPESTART.COM or the default location set in the domain<br />
object when it was created.<br />
Migrating from SLS/MDMS V2.X <strong>to</strong> ABS/MDMS V4.X B–29
Change language