HP Archive Backup System for OpenVMS Guide to Operations

Configuration Example
If you completed the procedure successfully and completely, your system should now be ready
for most operations using ABS and/or HSM. If you require further custom configuration, refer to
the Guide to Operations.
Now that you have configured MDMS, you need to move the volumes into the jukebox. In this
example, the volumes were already in the jukebox. I had to move them into the jukebox in the
database. This is why I used /NOASSIST/NOPHYSICAL. The following command moved the
volumes into the jukebox in the database. If you have a vision jukebox the volumes will have
been configured in the jukebox in the MDMS$CONFIGURE.COM procedure.
$ MDMS MOVE VOL TLZ000-TLZ011 TLZ06J/SLOT=0-11/NOASSIST/NOPHYSICAL
$ MDMS SHOW VOL
Volume ID State Scratch Date Placement
TLZ000 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 0
TLZ001 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 1
TLZ002 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 2
TLZ003 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 3
TLZ004 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 4
TLZ005 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 5
TLZ006 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 6
TLZ007 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 7
TLZ008 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 8
TLZ009 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 9
TLZ010 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 10
TLZ011 UNINITIALIZED NONE JUKEBOX TLZ06J, SLOT 11
TLZ012 UNINITIALIZED NONE ONSITE COMP_ROOM_1
You can show the contents of your jukebox using the following command:
$ MDMS SHOW JUKE TLZ06J/CONTENTS
Jukebox: TLZ06J
Description:
Access Control: NONE
Owner: MOE::SMITH
Nodes: MOE
Groups:
Location: COMP_ROOM_1
Disabled: NO
Auto Reply: YES
Access: ALL
State: AVAILABLE
Control: MRD
Threshold: 0
Free Volumes: 0
Robot: GKB601
Slot Count: 12
Usage: NOMAGAZINE
Configuration Example A–7