NEMA Contactors and Starters - Tri-State Electrical Supply

More documents

Recommendations

Info

33.1 NEMA Contactors and Starters Freedom Series 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 Solid-State Timers Solid-State ON DELAY Timer—Side Mounted on Freedom Series NEMA 00–2, IEC A–K and C25D, C25E and C25F Frame This timer is designed to be ON DELAY timing function wired in series with the starts. At the completion of load (typically a coil). When the set timing period, timer the START button is pushed and series wired load will (power applied to timer), the both be energized. Solid-State Timer Shorting Bar Kits These kits provide phase-tophase power connections of contactors for field assembly. The kits include bus Mounted Timer Product Selection Catalog Timing Range Number 0.1–1.0 seconds C320TDN1_ 1–30 seconds C320TDN30_ 30–300 seconds C320TDN300_ 5–30 minutes C320TDN3000_ Shorting Bar Kits Description NEMA Size 3, IEC Sizes L–N NEMA Size 4, IEC Sizes A–S NEMA Size 6, IEC Sizes T and U connections and mounting hardware. The shorting bars connect all three phases of a single contactor. Catalog Number C321SB18 C321SB19 C321SB22 Pneumatic Timers—Top Mounted Attachment mounts on top of unit has 1NO-1NC isolated any NEMA Size 00–2 or IEC timed contacts—circuits in Size A–K Freedom Series each pole must be the same starter or contactor (top polarity. Units are convertible mounted auxiliary contacts from OFF to ON DELAY or cannot be installed on device vice-versa. when timer is used). Timer Pneumatic Timers Pneumatic Timers Timing Range Maximum Ampere Ratings Vac Description 120 240 480 600 Locking Cover for Overload Relay—C306 Only Snap-on transparent or dial—helps prevent opaque plastic panel for accidental or unauthorized covering access port to the changes to trip and reset overload relay trip setting setting. Locking Cover for Overlay Relay Min. Ordering Description Quantity (Std. Pkg.) Notes Add operating voltage suffix to catalog number. A = 120V, B = 240V, E = 208V Rated 0.5 ampere pilot duty—not to be used on larger contactors. Terminal connections are quick connects only. Two per side. Catalog Number 0.1 to 30 seconds C320TP1 10 to 180 seconds C320TP2 Make 30 15 7.5 6 Break 3 1.5 0.75 0.6 Locking Cover for Overlay Relay Catalog Number Clear cover, no 50 C320PC3 accessibility Gray cover, no 50 C320PC4 accessibility, with Auto only nib Gray cover, no 50 C320PC5 accessibility, with Manual only nib Gray cover with FLA dial 50 C320PC6 accessibility, A, B, C, D positions and Auto only nib Gray cover with FLA dial accessibility, A, B, C, D positions and Manual only nib 50 C320PC7 22 Control Products Catalog CA08102001E—August 2010 www.eaton.com
NEMA Contactors and Starters Freedom Series 33.1 Identification Markers IEC Sizes A–K, NEMA Sizes 00–2 Designed to snap on the face of contactor for easy, personalized identification of Control Circuit Fuse Block These panel mounted fuse holders, designed for control circuit protection or other similar low current requirements, have extractor type fuse caps. The Class CC rejection type fuses (KTK-R) used in these holders are intended for use with Control Circuit Fuse Block Identification Markers Description Identification marker individual devices. Includes holder and labels. equipment designated as being suitable for use on systems having high available fault currents. If branch circuit protective device is 45A or greater, C320FBR fuse kit may be required for control circuit protection per NEC 430-72. Control Circuit Fuse Block Type Max. Amperes Catalog Number Dimensions Approximate Dimensions in Inches (mm) Fuse 1.88 (47.8) 1.25 (31.8) 0.97 (24.6) Catalog Number C320DL2 Fuse holder only 15 C320FB 0.88 1.19 (22.4) (30.2) 2.06 (52.3) 30 C320FBR DIN Rail Mounting Channel—35 mm Designed for DIN rail mounting of IEC style contactors and starters. DIN Rail Finger Protection Shields Snap-on shields for both contactors and starters provide IEC Type IP20 finger Adapter to DIN Rail Mount NEMA 1–2 and IEC G–K Contactors Designed to allow DIN rail mounting of NEMA 1–2 and IEC G–K contactors. Includes all hardware required to DIN Rail Description Catalog Number 1 meter length MC382MA1 protection. Prevents accidental contact with line/load terminals. Finger Protection Shields Application NEMA Size 00, IEC Sizes A–C NEMA Size 0, IEC Sizes D–F NEMA Sizes 1–2, IEC Sizes G–K Contactors Reversing contactors NEMA Size 1 Starters Reversing starters NEMA Size 2, IEC Sizes G–K Starters Reversing starters Adapter to DIN Rail Mount Catalog Number C320DN65 convert contactors from panel mounting to 35 mm DIN rail mounting. Notes A fuse is not supplied, but holder will accept a Bussman Type KTK or KTK-R (13/32 in x 1-1/2 in) fuse, 600V maximum. Includes a 5A, 600V KTK-R fuse. Catalog Number C320LS1 C320LS2 C320LS3 C320LS4 C320LS5 C320LS6 C320LS7 C320LS8 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 Control Products Catalog CA08102001E—August 2010 www.eaton.com 23
Page 1 and 2: NEMA Contactors and Starters NEMA A
Page 3 and 4: NEMA Contactors and Starters Freedo
Page 21: NEMA Contactors and Starters Freedo
Page 65 and 66: NEMA Contactors and Starters A200 S
Page 73 and 74:
NEMA Contactors and Starters A200 S
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
NEMA Contactors and Starters Soleno
Page 109 and 110:
NEMA Contactors and Starters Soleno
Page 111 and 112:
NEMA Contactors and Starters Shoe B
Page 113 and 114:
NEMA Contactors and Starters Shoe B
Page 115 and 116:
NEMA Contactors and Starters Refere
Page 117 and 118:
Page 119 and 120:
show all

NEMA Contactors and Starters - Tri-State Electrical Supply

Create successful ePaper yourself

Delete template?

Save as template?