GM 300 MQL - Guhring
GM 300 MQL - Guhring GM 300 MQL - Guhring
mQL TEcHNoLoGy The development of present-day MQL systems thanks to the research in MQL machining guhring created the pre-condition for a practical MQL technology. From the clamping set to the tool’s cutting edge all the components were integrated in the development – the result was the first MQL delivery system. Features: • modular constructed and standardised system • MQL and conventional clamping set are freely interchangeable thanks to an identical spindle contour • hydraulic, shrink fit and synchro chucks are all designed for the MQL clamping set Guhring‘s current MQL system by incorporating the MQL length adjustment screw to guhring‘s first MQL delivery system in 2007, the original drawback was eliminated. there is, therefore, currently a MQL delivery system available to the customer that optimally meets the requirements of the present-day production process. 1 BY GÜHRING Lic. HORKOS CORP 2 BY GÜHRING Lic. HORKOS CORP Features of the first Guhring MQL delivery system: • no lubricant delays • special MQL coolant delivery unit • MQL suitable tool shank end • tapered length setting screw the user, therefore, benefits from a standardised system and a clearly reduced stock keeping thanks to compatible components. 50 MQL
mQL TEcHNoLoGy Optimally formed shank end! For a secure MQL delivery Flow pattern with low vortex formation the delivery of these extremely low coolant quantities directly to the effective area is of utmost importance. Hereby, the geometric design of the shank end plays a significant role! the guhring developed conical shank end optimally satisfies the relevant MQL conditions. Advantages of the tapered shank end: • no lubricant delays • minimal dead area • simple operation • cost-efficient production Flow conditions in the coolant duct connection slot at the point of the tapered transition Keeping a cool point With MQL the process temperature can be considerably reduced in comparison to dry machining resulting in longer tool life and an increased process reliability. Thermographic examination at Guhring: Comparison of tool temperatures 500 400 300 200 100 0 431° C 196° C 145° C WITHOUT AIR MQL MQL 51
- Page 1 and 2: MQL BY GUHRING GM300 | MQL-Program
- Page 3 and 4: As one of the pioneers of MQL techn
- Page 5 and 6: MQL SySte teM finder HsK-A for auto
- Page 7 and 8: the minimal quantity lubrication MQ
- Page 9 and 10: mQL 1-channel-hydraulic chucks Hsk-
- Page 11 and 12: mQL 1-channel shrink fit chucks Hsk
- Page 13 and 14: mQL 1-channel shrink fit chucks Hsk
- Page 15 and 16: sealing lips for mQL 1-channel leng
- Page 17 and 18: mounting adaptor for mQL Hsk-A cool
- Page 19 and 20: mQL Hsk-A synchro tapping chucks fo
- Page 21 and 22: mQL 2-channel hydraulic chucks Hsk-
- Page 23 and 24: mQL 2-channel hydraulic chucks Hsk-
- Page 25 and 26: mQL 2-channel shrink fit chucks Hsk
- Page 27 and 28: mQL 2-channel shrink fit chucks Hsk
- Page 29 and 30: mQL 2-channel shrink fit chucks Hsk
- Page 31 and 32: mQL 2-channel length setting screws
- Page 33 and 34: mQL 2-channel coolant delivery set
- Page 35 and 36: mQL Hsk-A synchro tapping chucks fo
- Page 37 and 38: HSK Hsk cLAmPING TEcHNoLoGy BY GÜH
- Page 39 and 40: Suitable for different Spindle cont
- Page 41 and 42: 4-point clamping technology for mQL
- Page 43 and 44: GÜHRocLAmP mQL 4-point clamping se
- Page 45 and 46: Retention screw for GÜHRocLAmP mQL
- Page 47 and 48: mQL-cHEck 3000 PRoVIdEs AN oVERVIEW
- Page 49: mQL TEcHNoLoGy Introduction Alongsi
- Page 53 and 54: mQL TEcHNoLoGy MQL system types the
- Page 55 and 56: GUHRING No. INdEx Guhring no. Tool
mQL TEcHNoLoGy<br />
The development of present-day <strong>MQL</strong> systems<br />
thanks to the research in <strong>MQL</strong> machining guhring created<br />
the pre-condition for a practical <strong>MQL</strong> technology. From the<br />
clamping set to the tool’s cutting edge all the components<br />
were integrated in the development – the result was the first<br />
<strong>MQL</strong> delivery system.<br />
Features:<br />
• modular constructed and standardised system<br />
• <strong>MQL</strong> and conventional clamping set are freely<br />
interchangeable thanks to an identical spindle contour<br />
• hydraulic, shrink fit and synchro chucks are all designed<br />
for the <strong>MQL</strong> clamping set<br />
<strong>Guhring</strong>‘s current <strong>MQL</strong> system<br />
by incorporating the <strong>MQL</strong> length adjustment screw to<br />
guhring‘s first <strong>MQL</strong> delivery system in 2007, the original<br />
drawback was eliminated. there is, therefore, currently a<br />
<strong>MQL</strong> delivery system available to the customer that optimally<br />
meets the requirements of the present-day production<br />
process.<br />
1<br />
BY GÜHRING<br />
Lic. HORKOS CORP<br />
2<br />
BY GÜHRING<br />
Lic. HORKOS CORP<br />
Features of the first <strong>Guhring</strong> <strong>MQL</strong> delivery system:<br />
• no lubricant delays<br />
• special <strong>MQL</strong> coolant delivery unit<br />
• <strong>MQL</strong> suitable tool shank end<br />
• tapered length setting screw<br />
the user, therefore, benefits from a standardised system<br />
and a clearly reduced stock keeping thanks to compatible<br />
components.<br />
50 <strong>MQL</strong>