GM 300 MQL - Guhring

More documents

Recommendations

Info

HSK-C 63 HSK-C 50 HSK-C 40 4-PoINT cLAmPING TEcHNoLoGy foR mQL TEcHNIcAL INfoRmATIoN ANd AdVANTAGEs GÜHROcLAmP BY GÜHRING our 4-point clamping system is suitable for radial manual clamping. Primarily designed for installation in spindles (short drilling spindles, multiple-spindle drilling heads). HSK-C 80 HSK-C 100 HSK-C 32 Advantages: • simple and hence more economic spindle manufacture • short, small diameter spindles with constricted spindle bearing spacing • suitable for a pressure up to 160 bar (for conventional internal cooling) • fast response time thanks to uninterupted MQL delivery • compatible installation contour and application of our 4-point clamping set for conventional cooling
4-point clamping technology for mQL internal contour of spindle Milling driving slots Holder area installation and principle of operation the tool is ejected automatically by the ejector being activated by the clamping jaws. the o-ring in the HsK base omitted, as it is fitted to the clamping system SW direction of dynamic effect Minimum lubrication delivery bending, torsional and tightening moment for 4-point clamping sets for MQL Bending moment M = L x F M A B 1 1 L 1 L 2 Torsional moment M T = L 2 x F 2 F 1 F 2 MQL ➀ We recommend M A max. for rough machining and milling operations. For drilling and reaming operations a lower deviation of M A max. up to 30% is permissible. Please check the torque with a torque wrench. ➁ depending on temperature and lubricating conditions these values can be up to 15% lower. ➂ due to the screwed connection, M t max. can be lower with adaptors. HsK-C max. torque M A [nm] ➀ Key size max. drawing force [kn] ➁ max. linear bending moment M b [nm] ➁ max. transferrable torsional moment M t [nm] ➁ ➂ 32 3.0 2.5 8.5 72 105 40 6.0 3.0 12.5 135 180 50 12.0 4.0 24.0 330 390 63 24.0 5.0 32.0 570 680 80 40.0 6.0 45.0 1000 1570 100 60.0 8.0 53.0 1620 4200 41
Page 1 and 2: MQL BY GUHRING GM300 | MQL-Program
Page 3 and 4: As one of the pioneers of MQL techn
Page 5 and 6: MQL SySte teM finder HsK-A for auto
Page 7 and 8: the minimal quantity lubrication MQ
Page 9 and 10: mQL 1-channel-hydraulic chucks Hsk-
Page 11 and 12: mQL 1-channel shrink fit chucks Hsk
Page 15 and 16: sealing lips for mQL 1-channel leng
Page 17 and 18: mounting adaptor for mQL Hsk-A cool
Page 19 and 20: mQL Hsk-A synchro tapping chucks fo
Page 21 and 22: mQL 2-channel hydraulic chucks Hsk-
Page 23 and 24: mQL 2-channel hydraulic chucks Hsk-
Page 31 and 32: mQL 2-channel length setting screws
Page 33 and 34: mQL 2-channel coolant delivery set
Page 35 and 36: mQL Hsk-A synchro tapping chucks fo
Page 37 and 38: HSK Hsk cLAmPING TEcHNoLoGy BY GÜH
Page 39: Suitable for different Spindle cont
Page 43 and 44: GÜHRocLAmP mQL 4-point clamping se
Page 45 and 46: Retention screw for GÜHRocLAmP mQL
Page 47 and 48: mQL-cHEck 3000 PRoVIdEs AN oVERVIEW
Page 49 and 50: mQL TEcHNoLoGy Introduction Alongsi
Page 51 and 52: mQL TEcHNoLoGy Optimally formed sha
Page 53 and 54: mQL TEcHNoLoGy MQL system types the
Page 55 and 56: GUHRING No. INdEx Guhring no. Tool

GM 300 MQL - Guhring

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?