Cosmed Quark PFT - User manual.pdf - Frank's Hospital Workshop
Cosmed Quark PFT - User manual.pdf - Frank's Hospital Workshop
Cosmed Quark PFT - User manual.pdf - Frank's Hospital Workshop
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assemble the turbine<br />
Assemble the mask and the flowmeter<br />
1. Insert the turbine in the optoelectronic reader, in the way indicated by the arrow in<br />
the turbine.<br />
2. Insert the turbine plug on the front panel.<br />
<br />
Notice: It is advisable to<br />
lubricate periodically the O-<br />
rings inside the<br />
optoelectronic reader with<br />
sylicone grease for its good<br />
maintenance.<br />
3. Connect the external anti moisture filter to the sampling plug and joint the<br />
Permapure sampling line to the filter. It's strongly suggest to use the filter always<br />
and we recommend to replace it every 3 months.<br />
Using the "Ultimate Seal"<br />
The "ultimate seal" is a moulded of Elasto-Gel, a glycerine based hydrogel. This<br />
product is a unique polymer gel that forms an intimate seal between the face and the<br />
mask. It has to be used for mask applications on hard to seal faces and where leaks are<br />
not tolerated.<br />
• Will not irritate the skin<br />
• Contains no adhesives.<br />
• Has no odour<br />
• Will not dry out<br />
• Single patient use<br />
38 - <strong>Quark</strong> <strong>PFT</strong> <strong>User</strong> Manual