Remote Power Switch - Gude Analog

Remote Power Switch - Expert Power Control 8012
Rear panel: Expert Power Control 8012, with 8 ssi sockets
Electrical Connectors Features
• 1 Power Input (IEC C20, max. 16A)
• 8 Power Ports (ssi, IEC C13, max. 10A)
• Ethernet connector RJ45 (10/100 MBit)
• 19 inch, 1 RU
• Weight: 2,3 kg
Technical Details
• Operating temperature: 0-50 °C (non-condensing)
Ordering Information
• All Power Ports individually switchable
• Power-up delay adjustable individually for each Power Port
• After power blackout routines: on / off / remember last state,
individually adjustable for each Power Port
• Time-controlled batchmode for automated switching
• Buttons allow switching the Power Ports directly at the device
• Firmware update via Ethernet during operation
• HTTP 1.1, DHCP, SNMPv1 (traps), SNMPv2c (traps), Syslog
• Access control via IP Access Control List
• Access control via optional HTTP password
• Additional control option via command line tool
• Also switchable via RS232 serial interface
• Low power consumption: max. 5 Watt
Article Number Product Description Operating Voltage Maximum Current EAN Code
8012 Expert Power Control 8012 Power connectors on the rear panel,
ssi sockets
Detail: safety-snap-in socket
When it comes to pull-proof power connections, Expert Power Control 8012 comes in handy with its
safety-snap-in (ssi) sockets (IEC-C13). Through an internal lock mechanism, the ssi sockets prevent an
unintended release of the connected power cable.
The ssi sockets work with any standard IEC C14 plug, no special cables needed. When connected with the
ssi socket, the plug it is fastened safely. The connection can only be detached by pushing down the red
release button firmly to pull the plug from the ssi socket.
230V 16A 4250493180123
11