Hot runner nozzle - Günther Heisskanaltechnik ...
Hot runner nozzle - Günther Heisskanaltechnik ...
Hot runner nozzle - Günther Heisskanaltechnik ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Hot</strong> <strong>runner</strong> systems / manifolds<br />
Complete “<strong>Hot</strong> Halves”<br />
The hot half is delivered as a <strong>nozzle</strong>side<br />
mold half without cavity plates.<br />
The <strong>nozzle</strong> overhang over the supporting<br />
plate can be set individually.<br />
The height-matched hot <strong>runner</strong> is<br />
completely wired and functionally<br />
tested. This ready-to-install solution<br />
eliminates extensive design matching<br />
work and possible installation errors.<br />
Prior to delivery, hot halves are<br />
subjected to a functional test which is<br />
documented according to DIN EN<br />
ISO 9001:2000.<br />
Complete “<strong>Hot</strong> Halves” normally<br />
guarantee a smooth production<br />
start-up.<br />
Fig. Complete mold half “<strong>Hot</strong> Half”, valve gate system<br />
www.guenther-hot<strong>runner</strong>.com<br />
4/11 Subject to technical changes<br />
Fig. Cross section of a mold<br />
iT<br />
1.4. 56