Hot runner nozzle - Günther Heisskanaltechnik ...
Hot runner nozzle - Günther Heisskanaltechnik ...
Hot runner nozzle - Günther Heisskanaltechnik ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1.4. 35<br />
iT<br />
Assembly of the star manifold<br />
Insert the star manifold and use 4<br />
hexagon socket head cap screws<br />
M3x12 to fasten it to the sleeve-type<br />
heating.<br />
®<br />
<strong>Hot</strong>-<strong>runner</strong> <strong>nozzle</strong> OktaFlow<br />
for side multi-tip gatin under 90°<br />
without cold slug, in connection with a<br />
manifold or can be used as a single<br />
<strong>nozzle</strong> with heated adaptor.)<br />
Assembly of support<br />
Insert the support and mount the lid<br />
from the parting line. Note: the lid<br />
must be solidly bonded to the insert.<br />
<strong>Hot</strong>-<strong>runner</strong> <strong>nozzle</strong> PektaFlow®<br />
Number of tips: up to 24 tips, for side<br />
multi-tip gating under 90° without<br />
cold slug.<br />
Be used as a single <strong>nozzle</strong> with<br />
heated adaptor.<br />
<strong>Hot</strong>-<strong>runner</strong> <strong>nozzle</strong> PektaFlow ® type PLT<br />
are designed for challenging applications<br />
e.g. in medical technology<br />
and packaging.<br />
• Direct injection onto the product<br />
• Divided inserts<br />
• Tips individually replaceable<br />
• Leading-edge area heated for<br />
optimum temperature<br />
development<br />
• Supported on floating bearings and<br />
therefore independent of the ther<br />
mal expansions<br />
<strong>Hot</strong> <strong>runner</strong> <strong>nozzle</strong><br />
Assembly of the hot-<strong>runner</strong> <strong>nozzle</strong><br />
Push the hot-<strong>runner</strong> <strong>nozzle</strong> (MT) in<br />
from the <strong>nozzle</strong> side!<br />
www.guenther-hot<strong>runner</strong>.com<br />
Subject to technical changes 4/11