excess equipment to ongoing business

EXCESS EQUIPMENT TO
ONGOING BUSINESS
TW METALS, INC.
2105 LARRICK ROAD • CAMBRIDGE, OHIO
HERR-VOSS 60" CUT-TO-LENGTH LINE, S/N 17026
IMEAS MDL. RC1/160 SHEET POLISHER, S/N 19338
http://www.michaelfox.com e-mail: info@michaelfox.com
NORTH AMERICAN OFFICES: ARIZONA, CALIFORNIA, CANADA, FLORIDA, ILLINOIS, MARYLAND,
MASSACHUSETTS, MICHIGAN, NEW YORK, PENNSYLVANIA, TEXAS, WASHINGTON
ADDITIONAL OFFICES WORLDWIDE
David S. Fox, Ohio Lic. No. 63 83 3397 • J. Paul Shoniker, Ohio Lic. No. 621 999 77 239
David Fiegel, Ohio Lic. No. 20 2000142
GoIndustry
THURSDAY, JUNE 12 at 10:00 A.M.
HERR-VOSS 60" 60" SLITTING LINE, S/N 17205
YODER/HERR-VOSS MDL. Y-6050 Y-6050 36" 36" SLITTING LINE, LINE, S/N 47180
Inspection:
Cambridge Site: Wednesday, June 11, 10:00 A.M. to 4:00 P.M.
Remote Locations: Wednesday, June 11, 10:00 A.M. to 2:00 P.M.

RAND-BRIGHT MDL. BH100 BAR POLISHER, S/N 2965
8
Available
CINCINNATI SHEAR MDL. 10S20 3/4" PLATE SHEAR, S/N 42077
METLSAW MDL. NF1214-T12 ALUMINUM PLATE SAW, S/N 0405
3
Available
CAMBRIDGE EQUIPMENT
HERR-VOSS 60" Cut-to-Length Line, s/n 17026, capability:
stainless and nickel, max. yield 80,000 PSI, aluminum max.
yield 35,000 PSI, starting coil OD 72" max., ID 20", sheet
length 24"–192", width 18"–60", weight 24,700 lbs. max.,
pack height 24" max., pack weight 10,000 lbs. max.,
thickness .015"–.250".
HERR-VOSS 60" Slitting Line, s/n 17205, capability:
stainless, nickel and aluminum, max. yield stainless and
nickel 80,000 PSI, aluminum 35,000 PSI, starting coil OD
72" max., ID 20", recoil OD 72", ID 20", coil weight 24,700 lbs.
max., slit width 2"–60", thickness .040"–.188".
YODER/HERR-VOSS Mdl. Y-6050 36" Slitting Line, s/n 47180,
capability: stainless, aluminum, brass and copper, start coil
OD 54" max., ID 20", recoil OD 54" max., ID 20", slit width
1"–36", coil weight 10,000 lbs. max., thickness .030"–.100".
YODER 18" Slitter, s/n Y-283264, capability: stainless,
aluminum, brass and copper, start coil OD 70" max., ID
16"/20", recoil OD 35" max., ID 16", coil weight 2,000 lbs.
max., slit width 1/4"–18", thickness .010"–.063".
IMEAS Mdl. RC1/160 Sheet Polisher, s/n 19338, dry sheet
polisher equipped to put a satin finish on top and a
superficial finish on bottom of stainless steel, min. gauge
.0398, max. gauge .1874, min. sheet size 24" x 48", max.
sheet size 63" x 157", max. sheet weight 485 lbs.
RAND-BRIGHT Mdl. BH100 Bar Polisher, s/n 2965, polish
the surface of stainless steel bar to various finishes, min.
gauge .125", max. gauge .750", width 1"–8", length 42"–144".
TIME SAVER Mdl. TOP30 Metal Polisher, s/n 5043,
surface polish stainless steel plate, min. gauge 3/16",
max. gauge 2-3/4", width 1"–30", min. length 36".
(2) BUDGIT Mdl. 113455-53 1-Ton Jib Cranes, s/n
1975441-84.
CHICAGO 3-Ton OH Crane, s/n 26925, single-hoist,
25' bridge.
P&H Mdl. 113455-53 2-Ton Jib Crane, s/n 19754,
single-hoist.
ABELL HOWE Mdl. J904 3-Ton Jib Crane, s/n 791357908,
single-hoist.
YALE 2-Ton Jib Crane, single-hoist.
ABELL HOWE 5-Ton Gantry Crane, s/n 791357901,
50' bridge, single-hoist.
METLSAW Mdl. NF1214-T12 Aluminum Plate Saw,
s/n 0405, max. cut thickness 12", cut width 1"–165",
max. cut length 144".
ALLISON-CAMPBELL Mdl. 364 Plate Saw, straight cutting
of stainless steel and nickel plate, cutting line 62", thickness
2-1/4", cut width 1/2"–62".
OLIVER Mdl. 849 Plate Saw, s/n 203889, straight cutting of
stainless steel plate, max. length 21', max. thickness 3".
AMADA Mdl. HF330 Horizontal Band Saw, s/n 330-30058.
DoALL Mdl.C80 Horizontal Band Saw, s/n 190-72242.
(2) METORA Mdl. VMB280 Horizontal Band Saws,
s/n’s 5780409, 5780229.
W.J. SAVAGE Mdl. WJS30 Plate Saw, s/n 73508, straight
cutting of stainless steel and nickel, min. cut width 1-1/2",
max. thickness 2-1/2", max. length 15'6".

DoALL Mdl. ZV-60 60" Vertical Contour Saw, s/n 6008352.
DoALL Mdl. 2612-2H Contour Saw, s/n 206-6419.
ESAB Mdl. SSC Gantry Plasma Arc Cutting Machine, s/n AA-U-1521F4649, equipped
w/memory for circles and shapes, (2) water tables and Budzar chiller.
CINCINNATI Mdl. 6S12 1/2" Plate Shear, s/n 42519, new back gauges.
CINCINNATI Mdl. 10S20 3/4" Plate Shear, s/n 42077.
CINCINNATI Mdl. 2512G 1/4" Sheet Shear, s/n 41772.
EDWARDS Mdl. 1250P Squaring Shear, s/n 737790507.
INFRA PAK Mdl. SPIDER Stretch Wrap Unit, s/n 077312.
BENTEC Mdl. BT-220 Hydraulic Pipe Bender.
RAYMOND Mdl. 076-SL100-TN 60" Sideloader, s/n 076-00334.
WALLACE Mdl. 82-C-1M PVC Machine, s/n 6276.
FOSDICK Mdl. 4' ARM Drill Press, s/n 331.
INFRA-PAK Mdl. SPIDER Stretch Wrap, s/n 077312.
WRIGHT Mdl. H8622 1-Ton Monorail, s/n E-18326, single-hoist.
BELL & GOSSET Mdl. D1715-30T Air Compressor, 1.5 hp.
INGERSOLL Mdl. 234 Air Compressor, 3 hp., 60-gal. tank, s/n 30T632386.
VIEW OF MATERIAL STORAGE RACKS
OLIVER PLATE SAW
SHOP EQUIPMENT
Jib and Overhead Cranes; (4+) Air Compressors, 1.5 hp., 3 hp.,
15 hp.; (5+) Band Saws; Radial Arm and Circular Saws; Pedestal
and Bench Grinders; CALDWELL Univac 330 Electric Vacuum
Lifter; ACCO Vacuum Lifters; ACCO CADY Lifting Booms;
TOLEDO Pedestal and Floor Scales; Trailer Stabilizing Jacks;
Flammable Storage Cabinets; (2) 100-Ton Hydraulic Presses;
Parts Storage Cabinets; Assortment of Hand Tools; Slings and
Lifting Chains; (30+) HAMILTON 4-Wheeled Platform Carts;
Drum Racks; Assortment of Extension and Step Ladders; Tubing
and Pipe Benders; Air Strappers; Battery Chargers; Grounds
Maintenance Equipment and More.
MATERIAL STORAGE RACKS
(130±) 6" x 24" x 289" Double-Sided Racks.
(6±) 8" x 24" x 186" Double-Sided Racks.
(6±) 8" x 36" x 186" Double-Sided Racks.
(2±) 6" x 48" x 192" Double-Sided Racks.
(6±) 8" x 54" x 48" x 288" Double-Sided Racks.
(12±) 8" x 60" x 288" Double-Sided Racks.
(4±) 6" x 48" x 192" Single-Sided Racks.
(2±) 8" x 36" x 142" Single-Sided Racks.
(20±) 8" x 48" x 288" Single-Sided Racks.
(2±) 8" x 60" x 260" Single-Sided Racks.
(46±) 8" x 60" x 288" Single-Sided Racks.
(27±) 8" x 72" x 288" Single-Sided Racks.
(16±) 42" Wide x 18' High Upright Frames.
(22±) 36" Wide x 14' High Upright Frames.
(16±) 7' x 3,500-Lb. Max. Beams.
(34±) 8' x 3,500-Lb. Max. Beams.
(6±) 9' x 3,500-Lb. Max. Beams.
(56±) 10' x 3,500-Lb. Max. Beams.
(56±) 10' x 10,000-Lb. Max. Beams.
(116±) 3" x 36" Cross Braces.
(12±) 20,000-Lb. Stackable Coil Cradles.
Cradle Lifter, crane hook attachment.
(3,100±) 24" x 2,000-Lb. Max. Arms.
(500±) 24" x 3,000-Lb. Max. Arms.
(42±) 36" x 2,000-Lb. Max. Arms.
(179±) 48" x 2,000-Lb. Max. Arms.
(360±) 48" x 3,000-Lb. Max. Arms.
(82±) 48" x 3,000-Lb. Max. Arms, 6" beam.
(134±) 54" x 3,000-Lb. Max. Arms.
(280±) 60" x 3,000-Lb. Max. Arms.
(317±) 72" x 3,000-Lb. Max. Arms.
(5±) 48" x 55" Upright Braces.
(96±) 48" x 63" Upright Braces.
(76±) 48" x 72" Upright Braces.
(78±) 48" x 87" Upright Braces.
(54±) 48" x 95" Upright Braces.
(78±) 48" x 143" Upright Braces.
(120) Lockers, 12" wide x 36" high x 18" deep.

FORKLIFTS
1979 HYSTER Mdl. E-60-BC, s/n B120V2064A, 6,000-lb. capacity, 48" fork length.
1978 HYSTER Mdl. S-60-ES, s/n D002D05818Y, 6,000-lb. capacity, 48" fork length.
1978 HYSTER Mdl. S-60-ES, s/n D002D05816Y, 6,000-lb. capacity, 48" fork length.
1978 HYSTER Mdl. S-80-EBCS, s/n C004D03108Y, 8,000-lb. capacity, 45" fork length.
1988 HYSTER Mdl. S-150-A, s/n A024D05960J, 15,000-lb. capacity, 54" fork length.
1964 CLARK Mdl. CF-30MB, s/n 232-627, 3,000-lb. capacity, 40" fork length.
1980 RAYMOND Mdl. 075-SL100-TN, s/n 75-80-754, 10,000-lb. capacity, 60" fork length.
1982 RAYMOND Mdl. 076-SL100-TN, s/n 076-82-0173, 10,000-lb. capacity, 24"
fork length.
(2) RAYMOND Mdl. 076-SL100-TN, s/n’s 076-00-00753, 076-00-334, 10,000-lb. capacity,
60" fork length.
TRUCKS
1993 CHEVROLET Cheyenne 1/2-Ton Truck, approx. 87,500 miles.
1990 INTERNATIONAL 24' Flatbed Truck, VIN 1HTSDZZH8LH226019,
576,426 miles.
1991 INTERNATIONAL 24' Flatbed Truck, VIN 1HTSCNEP3MH332432,
267,999 miles.
1986 FORD Single-Axle Yard Tractor, VIN 1FDYW90W7GVA23987, 374,135 miles.
1996 INTERNATIONAL 24' Flatbed Truck, VIN 1HTSDAAN8TH316851,
148,687 miles.
2000 METTLER-TOLEDO Mdl. 7561 Truck Scale, 60,000-lb. capacity,
11' Wide x 80' Long.
ESAB PLASMA ARC CUTTING MACHINE, w/VISION 2000 MEMORY
TRAILERS
1980 AZTEC 28' Flatbed, VIN 6315.
1980 TRAILMOBILE 28' Flatbed, VIN V34976.
1988 DORSEY 28' Flatbed,
VIN 1DTP16W25JP023989.
1988 DORSEY 28' Flatbed,
VIN 1DTP16W23JP023988.
1986 FONTAINE 28' Flatbed,
VIN 13N1452CIG1540227.
1980 TRAILMOBILE 30' Flatbed, VIN V34647.
1985 UTILITY 32' Flatbed, VIN 1UYFS2457FA318014.
1985 UTILITY 28' Flatbed, VIN 1UYFS2459FA318001.
1984 FONTAINE 28' Flatbed,
VIN 1A11452C0E1538297.
1988 GREAT DANE 28' Flatbed,
VIN 1GRDM9024JM058110.
1988 GREAT DANE 28' Flatbed,
VIN 1GRDM9026JM058111.
1980 TRAILMOBILE 30' Flatbed, VIN V34958.
1981 FRUEHAUF 30' Flatbed,
VIN 1H4PO4222BF018907.
1980 TRAILMOBILE 30' Flatbed, VIN V34975.
1998 STRICK Converter, VIN 1S11CD101PB676192.
(2) Dollies, VIN 1S11CD102PB676184.
2
Available

THESE LOCATIONS TO BE OFFERED AT THE CAMBRIDGE AUCTION SITE
Agawam (Hartford)
D.R. BENNETT 3600 Wet Abrasive Cutoff Saw.
Charleston
ACCUSHEAR 837512 Hydraulic Sheet Shear.
Charlotte
ACCUSHEAR 837512 Hydraulic Sheet Shear.
FLOW AS-1210 Water Jet Shape Cutting Machine for
Aluminum, stainless, titanium, nickel, carbon, alloy,
brass, copper and non-metal materials, 10' x 12' table.
(2) HAAS VF-6 Vertical Machining Centers.
CMCI 330 Vacuum Lift, 2,280-lb. capacity, 28" single pad.
Mdl. 1500 Vacuum Lift, 10,000-lb. capacity s/n C-
08110, (4) 27" pads.
RAYMOND 904-4D-E4RTN 4D Lift Truck,
s/n 902-E4RTN-1589, 42" forks.
RAYMOND 41-4D-R40TN 4D Lift Truck,
s/n 041-81-4158, 24" forks.
CALDWELL Coil Upender, 7-1/2-ton capacity.
1 OF 4
FLOW WATER JET, LOCATED IN CHARLOTTE, SAN FRANCISCO, WICHITA & THE UNITED KINGDOM
HYSTER E60ES FORKLIFT, S/N B98D1861Z, 6,000-LB. CAPACITY,
42" FORK LENGTH
Cincinnati
STEEL WELD 6C12 Sheet Shear.
STEEL WELD 12E12 1/2" Stainless
Steel Plate Shear.
ESAB Avenger 2 Plasma Cutter,
(2) tables, (2) torches.
LODGE & SHIPLEY 2CT24
Sheet Shear, to 24" x 24".
DoALL 2612-2H Contour Saw.
NILES Radial Drill Press.
DoALL TF-18A Vertical Band Saw.
BULLARD 11628 Vertical
Turret Lathe.
INGERSOLL 21270 Ferrous
Plate Saw.
Cranbury
CLARK C500YS80 Forklift,
s/n Y685304676, 8,000-lb. capacity.
YALE Mdl. LG83P-060-CFS, s/n
P167352 6,000-lb. capacity.
YALE Mdl. GLP080LANFBS,
s/n P304006, 8,000-lb. capacity.
DoALL C80 Horizontal Band Saw.
1976 WHITE 6000-T Dsl. Road
Tractor, VIN BF001HA758879.
Los Angeles
METLSAW NF1214-T6 Non-Ferrous
Plate Saw.
CINCINNATI 1412 Sheet Shear.
DoALL 2W-3620 Contour Saw.
INGERSOLL SSR-EP50SE
50 Hp. Compressor.
Orlando
UNIVAC 3600 6-Pad Vacuum Lift,
s/n C-22966, 9,600-lb. capacity.
METLSAW NF1214-T8 Non-Ferrous
Plate Saw.
HAAS VF-6 VERTICAL MACHINING CENTER
Piscataway
(2) DAVEY 25BAQ 25 Hp. Air
Compressors, s/n’s 26154, 27310.
HANKINSON PR150 240-Volt Air Dryer,
s/n 0359-3C-9411-612.
BUCKEYE 93080 Boiler Storage Tank,
s/n 90-1-7-GM.
Payoff Uncoiler, coil ID 16" x 20".
READING 27.5' Span Overhead Remote
Crane, 10-ton capacity.
STANAT Coil Car, w/(2) pieces of 12" Wide
x 128" Long track, 57-1/2" x 50" x 24" car.
San Francisco
FLOW AS-1210 Water Jet Shape Cutting
Machine for Aluminum, stainless, titanium,
nickel, carbon, alloy, brass, copper and
non-metal materials, 10' x 12' table.
Bulk Storage System.
CMCI Vacuum Lift, 5-ton, 4-pad.
Seattle
KALAMAZOO Mdl. FA-350A Cutoff Saw,
s/n 134.
KALAMAZOO Saw.
HYSTER Mdl. E60ES, s/n B98D1861Z,
6,000-lb. capacity, 42" forks.
2
Available
Large Quantity of Assorted Storage Racks.
United Kingdom
FLOW AS-1210 Water Jet Shape Cutting
Machine for Aluminum, stainless, titanium,
nickel, carbon, alloy, brass, copper and
non-metal materials, 10' x 12' table.
Wichita
COLEMAN TAC80-153 Wet Abrasive Saw,
s/n 9701-184.
CAPCO 47A-20Ih Non-Ferrous Cutoff Saw,
s/n 91203.
FLOW AS-1210 Water Jet Shape Cutting
Machine for Aluminum, stainless, titanium,
nickel, carbon, alloy, brass, copper and
non-metal materials, 10' x 12' table.

TERMS OF SALE
NO WARRANTIES: Every item and lot in the “Auction” is sold: (a) “AS IS, WHERE IS,
AND WITHOUT RECOURSE,” and (b) with no warranties, guarantees or representation of any kind or
variety, whether expressed, implied or otherwise.
PAYMENT: A 10% buyer’s premium applies to the purchase price of all on-site purchases.
A 13-1/2% buyer’s premium applies to the purchase price of all on-line purchases. Cash or certified funds
required in full at the time and place of auction. Non-certified checks will NOT be accepted unless
accompanied by a valid bank letter of guarantee, which must be in the following format: This bank
guarantees payment to Michael Fox International from (name of customer) on account
#__________ up to the amount of $__________. This letter is valid for purchases at the
auction held at TW Metals on Thursday, June 12.
IP-3147294
AIRPORT
EXECUTIVE OFFICES
11425 CRONHILL DRIVE, OWINGS MILLS, MARYLAND 21117
(410) 654-7500 • (800) 722-3334 • FAX (410) 654-5876
NORTH AMERICAN OFFICES
ARIZONA, CALIFORNIA, CANADA, FLORIDA, ILLINOIS, MARYLAND, MASSACHUSETTS,
MICHIGAN, NEW YORK, PENNSYLVANIA, TEXAS, WASHINGTON
35 OFFICES IN 17 COUNTRIES
GoIndustry • Michael Fox International • Henry Butcher International • Karner & Co. • Appleboom
INSPECTION: Cambridge Site: Wednesday, June 11, 10:00 A.M. to 4:00 P.M.
Remote Locations: Wednesday, June 11, 10:00 A.M. to 2:00 P.M.
AIRPORT & TRANSPORTATION: This area is serviced by Port Columbus International Airport, approximately
80 miles west of auction site.
DIRECTIONS: (Approximately 80 miles from airport) From Port Columbus International Airport, Columbus, Ohio, take
I-670E toward I-270/Cleveland-Wheeling. Merge onto I-270 toward Wheeling. Take I-70E toward Wheeling (approximately
70 miles). Take Exit 178. Turn left on Southgate Parkway. Approximately 1 mile turn right (Larrick Road). Auction site on left.
OVERNIGHT ACCOMMODATIONS:
Holiday Inn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(740) 432-7313
Days Inn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(740) 432-5691
Comfort Inn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(740) 435-3200
EXCESS EQUIPMENT TO ONGOING BUSINESS
www.industrialauctioneers.org
http://www.michaelfox.com
e-mail: info@michaelfox.com
TW METALS, INC.
CAMBRIDGE, OHIO
THURSDAY, JUNE 12 at 10:00 A.M.
This Sale will be a “Webcast” auction, which enables you to bid securely in real-time from the comfort of
your own computer. To utilize this service, register with Michael Fox International at www.michaelfox.com.
To learn more about how a webcast works, please go to the Support section on our homepage and choose
“Webcast Instructions.”
SALE SITE
INFORMATION PROVIDED IS
BELIEVED TO BE ACCURATE, BUT IS
NOT GUARANTEED
LEASE FINANCING AVAILABLE
Maximize your bidding power! Get
PRE-APPROVED for up to $75,000 (USD)
in lease financing. For more information,
call the AuctionLea$e Department at
800-438-1470, or apply online at:
www.AuctionLease.com
FIRST CLASS MAIL
POSTMASTER: Dated Material.
Please Deliver Promptly.
Presorted
First Class Mail
U.S. Postage
PAID
Eugene, Oregon
Permit No. 305