DATA Acquisition - Instrumentation Devices
DATA Acquisition - Instrumentation Devices DATA Acquisition - Instrumentation Devices
DATA ACQUISITION Analog Module Selection Guide 13 Analog Module Specifications Applications Examples of Signal Sources and Notes 3 Phase Power Pressure Position Vibration Strain Temperature Current Voltage Excitation Digital Gain Analog Gain Bandwidth (Hz) Max rate (sps / channel) Accuracy (+/- FSR) Channels Module ADC/002 2 0.25 100k 12.5k 1, 10, 100 1 ±5V, 15mA/ch Piezoresistive pressure / microphone. ADC/008 3+3 0.3 20 1k Variable 1, 10 1 n/a Three phase power supplies. ADC/010 2 0.25 100k 20k 1,10,100 1 n/a Differential voltage sources. ADC/011 48 0.3 8.5k 600 Fixed 0.25, 1 1-4 n/a Single ended voltage sources. ADC/105 8 1.2 *1 24k 6k Variable 1,10,100, 1000 1-4 n/a Differential voltage sources. ICP type accelerometers. Inputs: 6 accelerometer + 2 differential voltage. ADC/106 6+2 1.2 *1 24k 6k Variable 1,10 1-4 Fixed 3.6mA/ch Quarter-bridge strain gages (120 or 350 Ohm). Individual excitation buffer and balance adjust per channel. ADC/109/QB 8 1.2 *1 24k 6k Variable 1,10,100, 1000 1-4 0 - 14.5mA/ch S1: Full, half, quarter-bridge strain gages. S2: pressure sensors, DC accelerometers, potentiometers. Individual excitation buffer and optional balance adjust per channel. ADC/109/S1 8 1.2 *1 24k 6k Variable 1,10,100, 1000 1-4 ±5.1V, 30mA/ch ADC/112 24 0.01 12k 3k Fixed 0.25,1,10 or 100 1-4 n/a Differential voltage sources. PT100 temperature sensors. Analog gain set to maximize PT100 range. ADC/113 16 0.35 12k 3k Fixed 1 1 - 2mA/ch Full, half, quarter-bridge strain gages. Excitation buffer shared between two channels. ADC/114 16 0.01 12k 3k Fixed 1,10 or 100 1-4 0 - ±5.1V, 15mA/ch ADC/116 12 0.4 12k 3k Fixed 1,2,4,8 Fixed 3.6mA/ch ICP©, Isotron©, Piezotron© and Deltatron© accelerometers. Full, half, quarter-bridge strain gages. Individual excitation buffer per channel. ADC/117 8 1.2 *1 24k 6k Variable 1,10,100, 1000 1-4 0 - 20mA/ch Full, half, quarter-bridge strain gages. Individual excitation buffer and balance adjust per channel. ADC/118 12 0.42 *2 12k 3k Fixed 1,10 or 100 1-4 0 - ±5.1V, 30mA/ch Full-, half, quarter-bridge strain gages, pressure sensors, DC accelerometers, potentiometers. ADC/120 12 0.42 *2 12k 3k Fixed 1,10 or 100 1-4 0 - ±5.1V, 30mA/ch ADC/126 4 0.1 100k 25k Variable 1, 10 1-16 24V, 3.6mA ICP©, Isotron©, Piezotron© and Deltatron© accelerometers. Full, half, quarter-bridge strain gages. Individual excitation buffer per channel. ADC/129 4 0.02 100k 24k Variable 1, 10, 100, 1000 1-16 0 - 14.5mA/ch CDC/002 24 1 *3 17.5k 1.1k n/a 1 n/a Differential-ended current channels. CDC/101 4 0.4 24k 300 Variable 1,10 1-4 n/a Piezoelectric accelerometers. 300Hz and 3kHz varients availble. LVDT and RVDT sensors. Excitation frequency options available: 2.5KHz, 5KHz and 10KHz.MDC/001 LDC/101 4 1.25 24k 6k n/a 1 3Vrms 25mA/ch Interfacing to analogue pressure scanners. Gain is fixed for each of the 8 input channels. MDC/001 8x64 0.25 300 n/a Variable 1, 2, 4 1 n/a Interfacing to Scanivalve analogue pressure scanners with temperature compensation sensor. Gain is fixed for the 2 mux input channels and 2 PT100/PT500 inputs. MDC/002 2x64 +2 0.25 195 n/a Variable 1, 2, 4 1 0.5 or 2.5mA Interfacing to Esterline analogue pressure scanners with temperature compensation sensor. 5V(50ma) or 12v(120mA) MDC/103 2x64 +2 0.25 312.5 n/a Variable 1, 2, 4 1 SDC/101 2 5 min of arc 25k n/a n/a 1 n/a Synchro sensors. Measures angle and angular velocity. Thermocouples (k, J, E, R, S, T). K type thermocouple, excluding thermocouple CJT measurement error. TDC/002 15 +1 ref 0.3 512 40 Fixed 1-4 n/a Thermocouples (k-type). High accuracy with reference compensation. TDC/107 12 0.23 8 70 Fixed 1-4 n/a *1 Combined Analog and digital Gain = 4000.Very small temperature drift of the resistors on the module cause additional constant error of ±90µe. *2 Combined DC & Excitation Error. *3 4-20mA range.
PRODUCT GUIDE Module Selection Guide Bus Monitoring Part No. Ch Description ABM/101 8 ARINC-429 bus monitor with parity option ABM/102 8 ARINC-429 bus packetizer ARI/002 1 ARINC-429 transmitter ARI/103 1 ARINC-573 bus monitor ARR/101 4 AFDX redundancy remover CBC/101 2 CAIS bus controller CBM/101 4 CCDL monitor CBM/102 4 CAN-bus monitor CBM/103 4 CCDL/MCDL bus monitor CBM/104 4 CSDB monitor DEC/103 2 IRIG-106 PCM decoder/merger EBM/101 1 Ethernet bus monitor EBM/102 1 Gigabit Ethernet bus monitor FBM/001 1 EF-2000 FCS bus monitor FBM/102 N/A FireWire bus monitor FBM/103 N/A S200 beta mode FireWire bus monitor MBI/001 1 MIL-STD-1553 remote terminal MBM/101 1 Dual redundant MIL-STD-1553 bus monitor MSB/103 1 Dual redundant MIL-STD-1553 bus monitor with Mode Code 17 support PBM/001 8 Panavia bus monitor SBM/001 2 Stanag-3910 bus monitor TBM/101 1 Serial dual redundant Time-Triggered Protocol (TTP) bus monitor TCG/102 14 Combined GPS and IRIG input UAR/102 4 RS-232/422/485 Universal asynchronous PARSER and SNARFER UAT/101 8 4 x RS-232 and 4 x RS-422 universal asynchronous transmitter UBM/101 8 RS-422 or RS-485 serial bus packetizer Digital Modules Part No. Ch Description DPI/002 N/A 16K x 16 bit external dual-port RAM reader DSI/002 24 Discrete input with counters and time tagging DSI/003 24 Bi-level input with counters and time tagging DSI/004 24 Optoisolated digital module SDI/001 8 Serial data input module SDI/103 4 Serial data bus parser VDC/001 2 CVSD voice to digital converter Backplane Controllers BCU/101 NA Backplane controller with IRIG-106 PCM encoder BCU/140 NA iNET-X compatible Ethernet bus controller MBC/001 NA MIL-STD-1553 topologies CBC/101 NA CAIS controller for CAIS topologies Other Modules BIT/101 14 Built-in self test BIT/102 14 Built-in self test module for health and status monitoring for networked FTI DAC/001 24 8 x analog outputs with 16 x discrete outputs ENC/106 14 IRIG-106 PCM encoder with PMF output ETH/101 3 DA and programming over Ethernet ETH/102 3 iNET-X compatible 2.5Msample/sec DA and programming over Ethernet MEM/004 N/A CompactFlash, data extraction via Ethernet MEM/103 N/A CompactFlash memory RTC/002 N/A Real-time clock (RTC) generator RTC/003 2 RTC generator with memory status outputs SWI/101 4 3 to 1 aggregator Ethernet switch SWI/102 4 2 to 2 aggregator with console port UTL/102 5 Format select line sequencing VID/103 1 MPEG-4 encoder 14
- Page 1 and 2: PRODUCT GUIDE DATA ACQUISITION KAM-
- Page 3 and 4: PRODUCT GUIDE One Product, Many App
- Page 5 and 6: PRODUCT GUIDE Compact, Low Power Th
- Page 7 and 8: PRODUCT GUIDE Bus Monitors The avio
- Page 9 and 10: PRODUCT GUIDE DAS Studio DAS Studio
- Page 11 and 12: PRODUCT GUIDE Related Products GS W
- Page 13: PRODUCT GUIDE Environmental Specifi
PRODUCT GUIDE<br />
Module Selection Guide<br />
Bus Monitoring<br />
Part No. Ch Description<br />
ABM/101 8 ARINC-429 bus monitor with parity option<br />
ABM/102 8 ARINC-429 bus packetizer<br />
ARI/002 1 ARINC-429 transmitter<br />
ARI/103 1 ARINC-573 bus monitor<br />
ARR/101 4 AFDX redundancy remover<br />
CBC/101 2 CAIS bus controller<br />
CBM/101 4 CCDL monitor<br />
CBM/102 4 CAN-bus monitor<br />
CBM/103 4 CCDL/MCDL bus monitor<br />
CBM/104 4 CSDB monitor<br />
DEC/103 2 IRIG-106 PCM decoder/merger<br />
EBM/101 1 Ethernet bus monitor<br />
EBM/102 1 Gigabit Ethernet bus monitor<br />
FBM/001 1 EF-2000 FCS bus monitor<br />
FBM/102 N/A FireWire bus monitor<br />
FBM/103 N/A S200 beta mode FireWire bus monitor<br />
MBI/001 1 MIL-STD-1553 remote terminal<br />
MBM/101 1 Dual redundant MIL-STD-1553 bus monitor<br />
MSB/103 1 Dual redundant MIL-STD-1553 bus monitor<br />
with Mode Code 17 support<br />
PBM/001 8 Panavia bus monitor<br />
SBM/001 2 Stanag-3910 bus monitor<br />
TBM/101 1 Serial dual redundant Time-Triggered Protocol<br />
(TTP) bus monitor<br />
TCG/102 14 Combined GPS and IRIG input<br />
UAR/102 4 RS-232/422/485 Universal asynchronous<br />
PARSER and SNARFER<br />
UAT/101 8 4 x RS-232 and 4 x RS-422 universal<br />
asynchronous transmitter<br />
UBM/101 8 RS-422 or RS-485 serial bus packetizer<br />
Digital Modules<br />
Part No. Ch Description<br />
DPI/002 N/A 16K x 16 bit external dual-port RAM reader<br />
DSI/002 24 Discrete input with counters and time tagging<br />
DSI/003 24 Bi-level input with counters and time tagging<br />
DSI/004 24 Optoisolated digital module<br />
SDI/001 8 Serial data input module<br />
SDI/103 4 Serial data bus parser<br />
VDC/001 2 CVSD voice to digital converter<br />
Backplane Controllers<br />
BCU/101 NA Backplane controller with IRIG-106 PCM encoder<br />
BCU/140 NA iNET-X compatible Ethernet bus controller<br />
MBC/001 NA MIL-STD-1553 topologies<br />
CBC/101 NA CAIS controller for CAIS topologies<br />
Other Modules<br />
BIT/101 14 Built-in self test<br />
BIT/102 14 Built-in self test module for health and status<br />
monitoring for networked FTI<br />
DAC/001 24 8 x analog outputs with 16 x discrete outputs<br />
ENC/106 14 IRIG-106 PCM encoder with PMF output<br />
ETH/101 3 DA and programming over Ethernet<br />
ETH/102 3 iNET-X compatible 2.5Msample/sec DA and<br />
programming over Ethernet<br />
MEM/004 N/A CompactFlash, data extraction via Ethernet<br />
MEM/103 N/A CompactFlash memory<br />
RTC/002 N/A Real-time clock (RTC) generator<br />
RTC/003 2 RTC generator with memory status outputs<br />
SWI/101 4 3 to 1 aggregator Ethernet switch<br />
SWI/102 4 2 to 2 aggregator with console port<br />
UTL/102 5 Format select line sequencing<br />
VID/103 1 MPEG-4 encoder<br />
14