Dr Peter Walters - University of the West of England
Dr Peter Walters - University of the West of England Dr Peter Walters - University of the West of England
Colour 3D Printing Technical Evaluation and Creative Applications: Consistency/accuracy of colour output - Comparing different post-processing/finishing methods On screen visualisation and 3D printed output – colour shape blocks to aid pre-visualisation Specifying Colour and Maintaining Colour Accuracy for 3D Printing Parraman, C. Walters, P. Huson, D. Reid, B (2008) IS&T/SPIE Electronic Imaging Symposium, San Jose 3D Printing and Colour: Technical Evaluation and Creative Applications Walters, P. Huson, D. Parraman, C. Stanic, M. (2009) Impact Conference, Bristol
Anemone Actuator • Visual and tactile display concept • Communication through movement and changes in shape • To inform the design of future multi-sensory (visual and tactile) interfaces • Fabricated by vacuum casting silicone rubber and by direct 3D printing in photopolymer elastomer material (Objet Geometries TangoPlus resin) Walters, P. (2005) PhD Thesis, Sheffield Hallam University Walters, P. (2009) ‘3D Printing and Fabrication of Responsive Devices: A Comparative Investigation’ Society of Imaging Science and Technology, Digital Fabrication 2009, Louisville, Kentucky. 20 – 24 September 2009
- Page 1 and 2: Dr Peter Walters RCUK Fellow, Rapid
- Page 3 and 4: My current role: 1. Developing a th
- Page 5 and 6: My current role: 1. Developing a th
- Page 7 and 8: What is 3D Printing? Provides physi
- Page 9 and 10: Undersea Machines. 3D printed form
- Page 11: Trumpet Tiles 3D printed form
- Page 15 and 16: Richard Hamilton, ‘Hutton Award
- Page 17 and 18: Richard Hamilton, ‘Hutton Award
- Page 19 and 20: Richard Hamilton, ‘Hutton Award
- Page 21 and 22: Recorded sound of the rapid prototy
- Page 23 and 24: Rhinoceros 3D polygon mesh (generat
- Page 25 and 26: Z-Corp powder-binder 3D prints 3D S
- Page 27: Thanks Any questions? Peter2.Walter
Colour 3D Printing<br />
Technical Evaluation and Creative Applications:<br />
Consistency/accuracy <strong>of</strong> colour output - Comparing different post-processing/finishing methods<br />
On screen visualisation and 3D printed output – colour shape blocks to aid pre-visualisation<br />
Specifying Colour and Maintaining Colour Accuracy for 3D Printing<br />
Parraman, C. <strong>Walters</strong>, P. Huson, D. Reid, B (2008) IS&T/SPIE Electronic Imaging Symposium, San Jose<br />
3D Printing and Colour: Technical Evaluation and Creative Applications<br />
<strong>Walters</strong>, P. Huson, D. Parraman, C. Stanic, M. (2009) Impact Conference, Bristol