Operating Manual Electronic Handrail Scale M25611 - Dencor
Operating Manual Electronic Handrail Scale M25611 - Dencor Operating Manual Electronic Handrail Scale M25611 - Dencor
Tare function The tare function allows to store a fixed weight that will be deducted each weighing procedure unless deleted or replaced by another. - Take weight of the object you want to put under tare (e.g. chair or a nurse to assist patient) as described before and store the result by pressing the TARE key. - The scale is now in NET weighing mode which is also indicated on the display. - If for example you stored the weight of a chair or a nurse, she can step now on the scale together with the patient or the patient may sit on the chair. - The weight displayed is the weight of the patient. - The scale identified the added weight. You may now use the scale for as many weighing procedures and the stored value will always be deducted. Definition and use of BMI (Body Mass Index) The Body Mass Index is the ratio between height and weight squared. The BMI is meanwhile accepted world wide – also by WHO (World Health Organization) - helping to evaluate the state of nutrition and with that also the state of health of a person. The result is a tolerance value. - Press the HOLD/BMI key for at least 3 seconds. - By doing that you selected the storage mode for your own height in cm. You will also find the word `HIGHT´ on the display. - Once entered the mode you find a given value that you will probably have to change. - The first digit (normally a 1) is blinking. Change indication if necessary by pressing the UNIT/HEIGHT key by using the numeric key stored (0-9). - Press the HOLD/BMI key again and you will get to the next digit. - Repeat the procedure until your exact height is shown on the display. - Press TARE key for confirmation and you will get back into the normal weighing mode. - Press again HOLD/BMI key to enter the BMI mode. - Step on the platform. - The blinking display offers you both – your weight and your BMI. - To deactivate the BMI mode press again HOLD/BMI key. Evaluation of the Body Mass Index BMI below 18 • The patient is not showing enough weight. Control nutrition to put on weight. BMI between 18 and 20 • The patient is slightly under weighed. If he feels well there is no need for a change. BMI between 20 and 25 • The patient is in the range of normal weight. BMI between 25 and 30 • The patient is slightly overweighed. A reduction of weight is indicated or, is necessary if the state of health is already affected (e.g. diabetes, high end blood pressure, heart diseases). BMI over 30 • Reduction of weight is imperative. Also to visit a doctor is highly recommended. 5 050100-Rev000-M25611
HOLD function By using the HOLD function the identified weight might be stored and is shown on the display even if you stepped already off the scale. The advantage is to take care of the patient first and then take note of the weight. - Press HOLD/BMI key while scale is under load. - The display shows a blinking arrow symbol next to the HOLD symbol. - Once the scale is loaded with more than 3 kg the blinking stops. - The weight displayed will now also show after unloading of the platform. - To deactivate the Hold function press again HOLD/BMI key. - If you are in Hold mode you might also change over to the Tare function by pressing the TARE key which means both functions might be used simultaneously. Cleaning and Maintenance Cleaning Before cleaning make sure the scale has been disconnected from the socket. For cleaning just use a damp cloth or common disinfection fluids. Do not use any aggressive cleaning fluids. Make sure no water or cleaning fluids is penetrating the scale. Your ADE scale is equipped with a mains adapter and rechargeable batteries. If the display shows the symbol `Low´ the power pack needs to be recharged by using the adapter. Safety Check Do NOT use the scale • If the mains adapter shows visible damages. • if the mains adapter is not working properly any more • After long storage in humid places Please contact your dealer or service partner in those cases. Storage and Transport Please keep all original parts and pieces for an eventual sending back of the scale in order to avoid any possible damage during transport which automatically leads to non warranty. Disconnect all cables before transport and avoid unnecessary damages. Warranty – Liability ADE will repair or replace this product within a period of 2 years from date of delivery applying to defects occurred due to poor material or workmanship (presentation of invoice is necessary). All moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty does not include natural wear, damages caused by incorrect or negligent handling, overuse or unsuitable or improper storage. The cost of transport will be borne by the customer should the equipment be located anywhere other then the customer’s premises. In the event of transport damage, claims under warranty can be accepted subject to using the complete original packaging and the equipment secured the way it was packed and secured originally. All the packaging should therefore be retained. 050100-Rev000-M25611 6
- Page 1 and 2: Operating Manual Electronic Handrai
- Page 3 and 4: Components and Features Tare key Ke
- Page 5: Caution: Please operate the scale o
HOLD function<br />
By using the HOLD function the identified weight might be stored and is shown on the display even if<br />
you stepped already off the scale. The advantage is to take care of the patient first and then take note<br />
of the weight.<br />
- Press HOLD/BMI key while scale is under load.<br />
- The display shows a blinking arrow symbol next to the HOLD symbol.<br />
- Once the scale is loaded with more than 3 kg the blinking stops.<br />
- The weight displayed will now also show after unloading of the platform.<br />
- To deactivate the Hold function press again HOLD/BMI key.<br />
- If you are in Hold mode you might also change over to the Tare function by pressing the<br />
TARE key which means both functions might be used simultaneously.<br />
Cleaning and Maintenance<br />
Cleaning<br />
Before cleaning make sure the scale has been disconnected from the socket.<br />
For cleaning just use a damp cloth or common disinfection fluids.<br />
Do not use any aggressive cleaning fluids.<br />
Make sure no water or cleaning fluids is penetrating the scale.<br />
Your ADE scale is equipped with a mains adapter and rechargeable batteries.<br />
If the display shows the symbol `Low´ the power pack needs to be recharged by using the adapter.<br />
Safety Check<br />
Do NOT use the scale<br />
• If the mains adapter shows visible damages.<br />
• if the mains adapter is not working properly any more<br />
• After long storage in humid places<br />
Please contact your dealer or service partner in those cases.<br />
Storage and Transport<br />
Please keep all original parts and pieces for an eventual sending back of the scale<br />
in order to avoid any possible damage during transport which automatically leads to non warranty.<br />
Disconnect all cables before transport and avoid unnecessary damages.<br />
Warranty – Liability<br />
ADE will repair or replace this product within a period of 2 years from date of delivery applying to<br />
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All<br />
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty<br />
does not include natural wear, damages caused by incorrect or negligent handling, overuse or<br />
unsuitable or improper storage. The cost of transport will be borne by the customer should the<br />
equipment be located anywhere other then the customer’s premises. In the event of transport<br />
damage, claims under warranty can be accepted subject to using the complete original packaging and<br />
the equipment secured the way it was packed and secured originally. All the packaging should<br />
therefore be retained.<br />
050100-Rev000-<strong>M25611</strong> 6
Change language