Shower floor element - Grumbach
Shower floor element - Grumbach
Shower floor element - Grumbach
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• pre-fabricated <strong>element</strong> for the construction of <strong>floor</strong> level<br />
showers<br />
• made of extra stable PUR integral hard foam<br />
• can be tiled directly<br />
<strong>Shower</strong> <strong>element</strong> made of PUR<br />
90 x 90 with drain channel 650 mm long<br />
Art.-No. 1820 345,– ¬<br />
<strong>Shower</strong> <strong>element</strong> made of PUR<br />
120 x 120 with drain channel 950 mm long<br />
Art.-No. 1825 425,– ¬<br />
• made of high grade, CFC-free and extra stable Polyurethane-integral-hard<br />
foam (PUR)<br />
• heat and condensation insulated<br />
• can be tiled directly (tile ready)<br />
• with high point loading value, therefore also suitable for wheelchairs<br />
• with horizontal drain DN 50 and stainless steel drain channel<br />
650 or 950 x 78 mm<br />
• Stainless steel drain cover with drainedge (closed from above or can be<br />
tiled by turning<br />
• Drain siphon, counter screw ring and siphon seal<br />
• with built in slope<br />
• with low installation height<br />
• with dual-sided expanded, absolutely waterproof sealing foil<br />
• with overlapping, assembly friendly, wall connection foil, therefore reliable<br />
sealing of all of the connections (Floor/Floor, Floor/Wall)<br />
• Square-shaped 90 x 90 or 120 x 120 cm (can be shortened in the<br />
factory on request)<br />
• Square or rectangular special shapes up to 120 x 120 can be supplied<br />
at extra cost on request! See page 15.<br />
�<br />
�<br />
�<br />
�<br />
Extra costs for<br />
Design channel I<br />
Art.-No. 1829.1 95,– ¬<br />
Design channel II<br />
Art.-No. 1829.2 95,– ¬<br />
Design channel III<br />
Art.-No. 1829.3 95,– ¬<br />
Design channel IV<br />
Art.-No. 1829.4 95,– ¬<br />
Subject to any kind of alterations, errors excepted. All prices are non-binding recommendations excl. VAT. Valid 10/2009<br />
900 (1200)<br />
<strong>Shower</strong> <strong>floor</strong> <strong>element</strong><br />
made of PUR with channel drainage<br />
Installation example: shower <strong>floor</strong> system, consisting of shower <strong>floor</strong><br />
<strong>element</strong> made of PUR 90 x 90 (Art.-No. 1820), shown here with the adjustable<br />
panel 90 x 90 (Art.-No. 1811)<br />
Technical Data<br />
Dimensions 900 x 900 x 36 mm 1200 x 1200 x 36 mm<br />
Sealing tape overlap 50 mm 50 mm<br />
Height with drain siphon 125 mm 125 mm<br />
Drain connection DN 50 vertical DN 50 vertical<br />
Drainage capacity 0.7 l/s 0.7 l/s<br />
Gradient ca. 2 % ca. 2 %<br />
Strength ca. 350 kg/m2 ca. 350 kg/m2 Density ca. 400 kg/m3 ca. 400 kg/m3 Tile height 5–15 mm 5–15 mm<br />
Inlet grate stainless<br />
steel<br />
650 x 78 mm 950 x 78 mm<br />
900 (1200)<br />
650 (950)<br />
height-adjustable<br />
from 5–15 mm<br />
DN 50<br />
80<br />
50<br />
36<br />
125<br />
Total installation heights with adjusting <strong>element</strong>s see page 14.<br />
5
Change language