Shower floor element - Grumbach

More documents

Recommendations

Info

Shower element made of PUR 120 x 120 with de-central drain Art.-No. 1842 495,– ¬ • made of high grade, CFC-free and extra stable Polyurethane-integral-hard foam (PUR) • heat and condensation insulated • can be tiled directly • with high point loading ratio, therefore also suitable for wheelchairs • with central horizontal or vertical drain DN 50 (please indicate when ordering!) • with low installation height • with dual-sided expanded, absolutely waterproof sealing foil • with overlapping, assembly friendly, wall connection foil, therefore reliable sealing of all of the connections (Floor/Floor, Floor/Wall) • Drain siphon, counter screw ring and siphon seal • tile height adjustment ring • Stainless steel inlay grate 98 x 98 mm • Special shapes are available at extra cost on request! See page 15. Shower floor element made of PUR with de-central grate drainage Technical Data Tile height setting ring height-adjustable from 8–20 mm DN 50 Dimensions 1200 x 2000 x 40 mm Sealing tape overlap 50 mm Height with drain siphon 110 mm Drain connection DN 50 vertical/horizontal Drainage capacity 0.7 l/s Gradient ca. 2 % Strength ca. 350 kg/m2 Density ca. 400 kg/m3 Tile height 8–20 mm Inlet grate stainless steel 98 x 98 mm 4 Karl Grumbach GmbH & Co. KG · Tel. (0 64 41) 97 72-0 · Fax (0 64 41) 97 72-20 · www.grumbach.net · grumbach@grumbach.net 2000 98 Installation example: normal height total installation height 110–155 mm DN 50 Shower floor element: Art.No. 1842 Adjusting plate: Art.No. 1816/1816.O 1200 110–155 98 Installation example: especially low total installation height 60–110 mm DN 50 Shower floor element: Art.No. 1842 Adjusting plate: 1816.N / 1816.N.O 50 40 60–110 110
• pre-fabricated element for the construction of floor level showers • made of extra stable PUR integral hard foam • can be tiled directly Shower element made of PUR 90 x 90 with drain channel 650 mm long Art.-No. 1820 345,– ¬ Shower element made of PUR 120 x 120 with drain channel 950 mm long Art.-No. 1825 425,– ¬ • made of high grade, CFC-free and extra stable Polyurethane-integral-hard foam (PUR) • heat and condensation insulated • can be tiled directly (tile ready) • with high point loading value, therefore also suitable for wheelchairs • with horizontal drain DN 50 and stainless steel drain channel 650 or 950 x 78 mm • Stainless steel drain cover with drainedge (closed from above or can be tiled by turning • Drain siphon, counter screw ring and siphon seal • with built in slope • with low installation height • with dual-sided expanded, absolutely waterproof sealing foil • with overlapping, assembly friendly, wall connection foil, therefore reliable sealing of all of the connections (Floor/Floor, Floor/Wall) • Square-shaped 90 x 90 or 120 x 120 cm (can be shortened in the factory on request) • Square or rectangular special shapes up to 120 x 120 can be supplied at extra cost on request! See page 15. � � � � Extra costs for Design channel I Art.-No. 1829.1 95,– ¬ Design channel II Art.-No. 1829.2 95,– ¬ Design channel III Art.-No. 1829.3 95,– ¬ Design channel IV Art.-No. 1829.4 95,– ¬ Subject to any kind of alterations, errors excepted. All prices are non-binding recommendations excl. VAT. Valid 10/2009 900 (1200) Shower floor element made of PUR with channel drainage Installation example: shower floor system, consisting of shower floor element made of PUR 90 x 90 (Art.-No. 1820), shown here with the adjustable panel 90 x 90 (Art.-No. 1811) Technical Data Dimensions 900 x 900 x 36 mm 1200 x 1200 x 36 mm Sealing tape overlap 50 mm 50 mm Height with drain siphon 125 mm 125 mm Drain connection DN 50 vertical DN 50 vertical Drainage capacity 0.7 l/s 0.7 l/s Gradient ca. 2 % ca. 2 % Strength ca. 350 kg/m2 ca. 350 kg/m2 Density ca. 400 kg/m3 ca. 400 kg/m3 Tile height 5–15 mm 5–15 mm Inlet grate stainless steel 650 x 78 mm 950 x 78 mm 900 (1200) 650 (950) height-adjustable from 5–15 mm DN 50 80 50 36 125 Total installation heights with adjusting elements see page 14. 5
Page 1 and 2: Shower floor systems Shower floor a
Page 3: • Pre-fabricated elements for the
Page 7 and 8: • pre-fabricated element for the
Page 9 and 10: • made of extra stable PUR integr
Page 11 and 12: • made of extra stable PUR integr
Page 13 and 14: Single support foot 20 mm for retro
Page 15 and 16: Subject to any kind of alterations,

Shower floor element - Grumbach

Create successful ePaper yourself

Delete template?

Save as template?