Shower floor element - Grumbach

More documents

Recommendations

Info

Inhalt 3–6 Shower floor elements made of PUR 7–8 Shower floor elements made of mineral material 9–11 Adjusting plates made of PUR 12 Adjusting frames made of PUR 13 Accessories 14 Shower floor systems Installation examples and installation heights 15 Order form for special models 16 Grumbach representatives The Family business Grumbach has for many years successfully developed solutions for the challenges presented to it in practice. We wish our partners every success! Grumbach ... innovation, competence, experience 2 Installation example for the grumbach shower floor system: adjusting plate (1) with shower floor element made of PUR (2) for direct tiling - perfect for floor level showers. It is common knowledge that the popularity and importance of walk-in showers with no floor threshold is increasing. Not only wheelchair users, but also senior citizens, are tending towards using this type, as there is no threshold which could cause tripping. In addition, floor level showers allow a uniformed appearance in the bathroom – an important reason for their increased popularity. The shower floor can be optically integrated into the room completely. Matching tiles can then be fitted on the walls and floors. For this reason, Grumbach has developed various shower floor elements, which can be installed on a robust base unit (adjusting frame or adjusting plate) – with perfect fitting and without leveling fill or levelling screed. The new floor level shower floor system from Grumbach consists of the following components: A. Shower floor elements made of PUR are made of high-grade, CFC-free and extra stable Polyurethane integrated hard foam (PUR). They are not only heat and condensation water insulated, but also they are suitable for direct tiling. The distinguish themselves through their high point loading value (> 300 kg/m 2 ) and are therefore also suitable for wheelchair even when tiled with mosaic tiles. Currently, seven different standard versions are available. B. Shower floor elements made of mineral material (Rokan) are alternatives to PUR shower floor elements. There are 4 versions: 2 sizes, each with 2 models. C. Adjusting plates made of PUR are a robust and fitting addition to the shower floor elements. They are available in 8 different versions as standard: 2 standard sizes, each with minimal or maximal openings, and all in 2 installation heights. D. Adjusting plates made of PUR are suitable for many commercially available shower floor elements and shower trays due to their considerably stable construction. 2 Karl Grumbach GmbH & Co. KG · Tel. (0 64 41) 97 72-0 · Fax (0 64 41) 97 72-20 · www.grumbach.net · grumbach@grumbach.net 1
• Pre-fabricated elements for the construction of floor-level showers • made of extra stable PUR integral hard foam • can be tiled directly Shower floor element made of PUR 90x90 cm (Art.-No. 1800) Shower element made of PUR 90 x 90 with central drain Art.-No. 1800 225,– ¬ Shower element made of PUR 120 x 120 with central drain Art.-No. 1808 295,– ¬ • made of high grade, CFC-free and exra stable Polyurethane-integral-hard foam (PUR) • heat and condensation insulated • can be tiled directly • With tile height adjustment ring • with high point loading ratio, therefore also suitable for wheelchairs • with central horizontal or vertical drain DN 50 and stainless steel 98 x 98 (please indicate when ordering!) • Drain siphon, counter screw ring and siphon seal • with built in 4-sided slope • with low construction height • with dual-sided expanded, absolutely waterproof sealing foil • with overlapping, assembly friendly, wall connection foil, therefore reliable sealing of all of the connections (Floor/Floor, Floor/Wall) • square-shaped 90 x 90 cm or 120 x 120 cm (can be shortened in factory on request) • Square or rectangular special shapes as well as quarter-circles and pentagonal up to 120 x 120 can be supplied at extra cost on request! See page 15. � � Extra costs for Design grate I Art.-No. 1809.R1 Design grate II 65,– ¬ Art.-No. 1809.R2 65,– ¬ Subject to any kind of alterations, errors excepted. All prices are non-binding recommendations excl. VAT. Valid 10/2009 Shower floor elements made of PUR with central grate drainage Installation example: shower floor system, consisting of shower floor element made of PUR 90 x 90 (Art.-No. 1800), shown here with the adjustable panel 90 x 90 (Art.-No. 1811) Technical data Dimensions 900 x 900 x 36 mm 1200 x 1200 x 36 mm Sealing tape overlap 50 mm 50 mm Height with drain siphon 105 mm 105 mm Drain connection DN 50 DN 50 vertical/horizontal vertical/horizontal Drainage capacity 0.7 l/s 0.7 l/s Gradient ca. 2 % ca. 2 % Strength ca. 350 kg/m2 ca. 350 kg/m2 Density ca. 400 kg/m3 ca. 400 kg/m3 Tile height 8–20 mm 8–20 mm Inlet grate, stainless steel 98 x 98 mm 98 x 98 mm 900/1200 98 900/1200 98 tile height adjustment ring 8–20 mm 50 36 DN 50 105 Total installation height with adjusting element, see page 14. 3
Page 1: Shower floor systems Shower floor a
Page 5 and 6: • pre-fabricated element for the
Page 7 and 8: • pre-fabricated element for the
Page 9 and 10: • made of extra stable PUR integr
Page 11 and 12: • made of extra stable PUR integr
Page 13 and 14: Single support foot 20 mm for retro
Page 15 and 16: Subject to any kind of alterations,

Shower floor element - Grumbach

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?