22-Cutting Tools.40_200310.qxd - Hanes Supply, Inc

22
Cutting
Tools
Cutting Tools
WIzArD ELITE
Each saw blade is
designed for three
specific saws; Mitre
box, radial Arm and
Table Saw
Contractor’s Special - Carbide
For general purpose ripping and crosscutting on
wood, exterior plywood and related materials.
Special heavy gauge for greater durability.
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
650-7312 6-1/2 165 12 UNIV. .080 .120 12°
725-7314 7-1/4 184 14 UNIV. .080 .120 12°
800-7316 8 203 16 UNIV. .080 .120 12°
900-7318 9 229 18 5/8 .090 .130 12°
100-7324 10 254 24 5/8 .090 .130 12°
120-7324 12 305 24 1 .096 .136 12°
22-50
Complete Contractor and Industrial Supplier • Sling and Rigging Specialist Since 1930
Visit us online at www.hanessupply.com
Table Saw
Teflon Coated - Carbide
In a table saw, the motor and blade remain stationary, and the material
moves into the blade. The flat, table-like top creates a surface on
which to feed the material. This 40-tooth, alternate top bevel carbide blade
uses a 12° positive hook angle to give the user maximum versatility in
material feeding, an especially important feature for cutting woods of various
thickness and hardness. This blade is guaranteed to be the smoothest
cutting blade ever used on a table saw.
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
800-7740T 8 203 40 UNIV. .070 .100 10°
825-7740T 8-1/4 210 40 UNIV. .070 .100 12°
100-7740T 10 254 40 5/8" .090 .120 12°
radial Arm Saw
Teflon Coated - Carbide
The Radial Arm saw is a pendulum-style saw, where both the blade and
motor are mounted above the work station. As the blade and motor move,
the material remains stationary. Therefore, feed is the critical element of
safe and easy operation. This 60-tooth carbide blade features a 5° negative
hook angle and triple chip tooth sharpening. It will not feed itself, so
the user maintains maximum control over the feed of cut. This blade is
guaranteed to be the smoothest cutting blade ever used on a radial arm
Part Diameter No. of Plate Hook
saw.
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
800-P8160T 8 203 60 UNIV. .060 .090 -5°
825-P8160T 8-1/4 210 60 UNIV. .060 .090 -5°
850-P8160T 8-1/2 216 60 5/8" .060 .090 -5°
100-PB160T 10 254 60 5/8" .070 .100 -5°
120-P8160T 12 305 60 1" .075 .105 -5°
140-P8160T 14 356 60 25mm/1" .090 .012 -5°
Mitre box Saw
Teflon Coated - Carbide
Mitre Box saws feature a blade and motor mounted on a moving arm. The
material is held in place while the blade and motor move to it. Since the mitre
box is strictly a cutoff saw, we have designed these 60- and 80-tooth alternate
top bevel carbide blades with a 12° positive hook angle to deliver precision
smooth cuts and chip out free edges in nearly any material. This blade
is guaranteed to be the smoothest cutting blade ever used on a mitre box
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
800-7260T 8 203 60 UNIV. .080 .110 12°
825-7360T 8-1/4 210 60 UNIV. .080 .110 12°
900-7260T 9 229 60 5/8" .090 .120 12°
100-7280T 10 254 80 5/8" .090 .120 12
120-7280T 12 305 80 1" .096 .126 12°
140-7280T 14 356 80 25mm/1" .090 .120 12°
150-7280T 15 381 80 1" .090 .120 12°
PrOFESSIONAL SErIES
saw.
Oldham
WWW.HANESSUPPLY.COM
rip Saws - Carbide
Rip saws are designed to cut material with the grain, in both soft and hard
woods. Can be used with manual or power feed saws at various speeds.
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
800-7024 8 203 24 UNIV. .080 .120 30°
100-7024 10 254 24 5/8 .090 .130 30°
120-7030 12 305 30 1 .096 .136 30°
140-7036 14 356 36 25mm/1 .100 .140 30°
160-7036 16 406 36 25mm/1 .100 .140 30°
Nail Cutting Saws - Carbide
This heavy-gauge carbide is designed for tough cutting jobs such as:
used lumber or flooring with embedded nails and concrete-coated forming
material. A special negative rake provides strength plus safety. (Feed with
smooth, even pressure.)
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
650-6812 6-1/2 165 12 UNIV. .080 .120 -5°
725-6814 7-1/4 184 14 UNIV. .080 .120 -5°
800-6818 8 203 18 UNIV. .080 .120 -5°
100-6824 10 254 24 5/8 .090 .130 -5°
120-6824 12 305 24 1 .096 .136 -5°
Non-Ferrous Metal - Carbide
Designed to cut all types of aluminum sheets, tubing extrusions and other
non-ferrous metals such as copper, brass, leads and magnesium. It is
recommended that some type of lubricant be used with this blade, preferably
a stick wax and that both ends of the material being cut are securely
clamped in place before cutting.
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
725-P7540 7-1/4 184 40 UNIV. .060 .100 0°
850-P7548 8-1/2 216 48 5/8 .070 .110 0°
800-P7560 8 203 60 UNIV. .070 .110 0°
900-P7560 9 229 60 5/8 .090 .130 0°
100-P7560 10 254 60 5/8 .090 .130 0°
120-P7560 12 305 60 1 .096 .136 0°
140-P7560 14 356 60 25mm/1 .100 .140 0°
100-P7580 10 254 80 5/8 .090 .130 0°
120-P7580 12 305 80 1 .096 .136 0°
140-P7580 14 356 80 25mm/1 .100 .140 0°
140-P75100 14 356 100 25mm/1 .109 .149 0°
150-P75100 15 381 100 1 .090 .130 0°
160-P75100 16 406 100 25mm/1 .109 .149 0°
Framing Combination - Carbide
For fast cutoffs and rips in all types of wood, finished plywood and
prefinished materials materials. Very good all-purpose.
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
650-7424 6-1/2 165 24 UNIV. .054 .100 12°
700-7424 7 178 24 UNIV. .054 .100 12°
725-7424 7-1/4 184 24 UNIV. .054 .100 12°
800-7424 8 203 24 UNIV. .070 .110 12°
roofer’s Special - Carbide
For rough cutting through tar paper, shingles and related roofing materials
with embedded nails. The special anti-stick coating allows the blade to
cut without binding or sticking. (Clean blade with solvent after each use.)
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
725-6914 7-1/4 184 14 UNIV. .080 .120 -5°
Emergency Cutting - Carbide
Used extensively by fire departments and demolition teams for cutting
through large sections of buildings. Will cut most building materials,
including tar paper, roofing, nails and non-ferrous materials.
Part Diameter No. of Plate Hook
No. (in) (mm) Teeth Arbor Thickness Kerf Angle
120-7812 12 305 12 20mm / 1" / 7/8" .096 .136 -5°
120-7824 12 305 24 20mm / 1" / 7/8" .096 .136 -5°
140-7824 14 356 24 20mm / 1" / 7/8" .120 .160 -5°
The following warning has been issued by OSHA.
Do not use this blade on multi-purpose cutoff saws, including gas power saws, unless
saw has guard that completely covers both the upper half and the lower half of the
blade. This guard must extend to the lowest point of the cutting teeth on the bottom of
the blade. Be sure to read owner's manual of the saw and follow all instructions and
safety procedures. Always wear safety goggles. Consult owner’s manual.