Drive and control solutions for metalforming and ... - Bosch Rexroth

One control strategy throughout your plant
...crossbar press transfers...
Rexroth Indramat controls the
motion and synchronization of the
crossbar transfer system. Multiple
controllers synchronize multiple
drives for smooth, precise control,
from destacker, to die carts to
in-press transfer mechanisms to
stackers and conveyors. And
Rexroth Indramat provides variable
frequency/vector drives for the main
press drive, synchronized with the
rest of the control system.
Built-in functionality includes:
• Precise coordinated motion for
independent complex moves on
the part orientation stations
between the presses
• The Rexroth Indramat
controller controls I/O for
suction, sensors, etc.
• The system interfaces easily to
any PLC, PC or fieldbus
• Programmable error reaction in
the motion control and drives
allows you to specify the proper
drive action should an error occur
Optional features include:
• Line regenerative drives with a
common DC bus store energy,
allowing for a safe, controlled
stop upon power loss
• Redundant press and motor
encoders ensure system safety
Benefits include:
• Higher production rates
• Improved part quality with fewer
reject parts
• Improved system uptime
• Faster setups
• Higher reliability
Multiple electronically synchronized servos control part transfer
and orientation stations, on signals from the press encoder
14