A comprehensive tool-wear/tool-life performance model in the ...

886
ARTICLE IN PRESS
P.W. Marksberry, I.S. Jawahir / International Journal of Machine Tools & Manufacture 48 (2008) 878–886
[13] P.W. Marksberry, Micro-flood (MF) technology for sustainable
manufacturing operations that are coolant less and occupationally
friendly, Journal of Cleaner Production 15 (10) (2007) 958–971
Center for Manufacturing, College of Engineering, University of
Kentucky, Lexington.
[14] P.W. Marksberry, An assessment of tool-life performance in
NDM (near dry machining) for sustainable manufacturing of
automotive steel components, Dissertation, Department of Mechanical
Engineering, College of Engineering, University of Kentucky,
2004.
[15] M.G. Gressel, Comparison of mist generation of flood and mist
application of metal working fluids during metal cutting, Dissertation,
Department of Mechanical, Industrial, and Nuclear Engineering,
College of Engineering, University of Cincinnati, 2001.
[16] I. Scandiffio, A contribution to dry cutting and to minimum quantity
of fluid in steel cutting, M.Sc. Dissertation in Mechanical Engineering,
Campinas, SP, Brazil, 2000 (in Portuguese).
[17] A. Rahman, S. Kumar, M. Salam, Evaluation of minimal quantities
of lubrication in end milling, International Journal of Advance
Manufacturing Technologies, Department of Mechanical and Production
Engineering, National University of Singapore, Singapore,
Springer, 2001.
[18] D. Chen, Y. Suzuki, K. Sakai, A study of turning operation by
oil–water combined mist lubrication machining method, Key
Engineering Materials 202-2 (03) (2001) 47–52.
[19] B. Kramer, An analytical approach to tool wear prediction, Ph.D.
Thesis, Department of Mechanical Engineering, MIT, USA, 1979.
[20] E. Usui, T. Shirakashi, T. Kitagawa, Analytical Prediction of Cutting
Tool Wear, 1984, pp. 129–151.
[21] V. Venkatesh, Computerized machinability data, in: Proceedings of
Automach, 27–29 May 1986, Australia, Sydney, SME, Dearborn,
MI, p. 159.
[22] W. Lau, P. Venuvinod, C. Rubenstein, The relation between tool
geometry and the Taylor tool-life constant, International Journal of
Machine Tool Designing and Research 20 (1989) 29–44.
[23] P. Dearnley, E. Trent, Wear mechanisms of coated carbide tools,
Metals Technology (1982) 60–75.
[24] B. Mills, A. Redford, Manufacturing of Engineering Materials,
Applied Science, London, 1983, p. 20.
[25] J. Schey, Introduction to Manufacturing Processes, second ed.,
McGraw-Hill, New York, 1987, p. 464.
[26] B. Niebel, A. Draper, R. Wysk, Modern Manufacturing Process
Engineering, McGraw-Hill, New York, 1989, p. 487.
[27] E. Hoffman, Fundamentals of Tool Design, second ed., SME,
Dearborn, MI, 1984, p. 83.
[28] D.T. Quinto, Mechanical property and structure relationships in hard
coated carbide tools, Metals Technology 9 (1988) 60–75.
[29] P. Oxley, The Mechanics of Machining—An Analytical Approach to
Assessing Machinability, Ellis Horwood, Chichester, 1989, p. 185.
[30] H. Wang, R. Wysk, An expert system for machining data selection,
Computers and Industrial Engineering 10 (2) (1986) 99.
[31] I. Jawahir, P. Li, R. Gosh, E. Exner, A new parametric approach for
the assessment of comprehensive tool wear in coated grooved tools,
Annals of the CIRP 44 (1995) 49–54.
[32] P. Li, D. Stein, R. Gosh, I. Jawahir, Engaged cutting edge effects on
tool-wear and tool-life in turning operations using grooved cutting
tools, Manufacturing Science and Technology, vol. 2, ASME 1997,
pp. 277–284.