1998 S/N 21329 - Walker Mowers
1998 S/N 21329 - Walker Mowers
1998 S/N 21329 - Walker Mowers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Maintenance Instructions<br />
REPLACING/REPAIRING<br />
GHS Blower Drive Belt<br />
1. Remove the GHS blower drive belt by unhooking<br />
the belt tension spring from the hook on the<br />
chassis frame (located above the blower pulley).<br />
Lift the belt tightener idler pulley up and roll<br />
belt off the pulleys.<br />
Blower Drive<br />
Pulley<br />
Blower<br />
Pulley<br />
Chassis<br />
Frame Hook<br />
GHS Blower<br />
Drive Belt<br />
Belt Tightener<br />
Idler Pulley<br />
(Disengaged)<br />
Spring<br />
Removed<br />
2. Reverse the procedure to install the GHS blower<br />
drive belt and spring.<br />
GHS Blower Drive Belt Assembly (Disengaged)<br />
Blower Drive Belt Spring Removal<br />
Spring<br />
Attached<br />
Idler Pulley<br />
(Engaged)<br />
GHS Blower Drive Belt Assembly (Engaged)<br />
67