1998 S/N 21329 - Walker Mowers
1998 S/N 21329 - Walker Mowers
1998 S/N 21329 - Walker Mowers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance Instructions<br />
REPLACING/REPAIRING<br />
Jackshaft Drive Belt<br />
1. To remove the jackshaft drive belt:<br />
a. Remove the engine PTO drive belt, as<br />
described in previous section.<br />
b. Relax the belt by depressing the springloaded<br />
idler arm.<br />
c. Roll the belt off the jackshaft pulley and<br />
remove.<br />
Jackshaft<br />
Push Idler Pulley Down to Relax Belt<br />
Idler Pulley<br />
Jackshaft<br />
Drive Belt<br />
Tension Spring<br />
Engine<br />
Pulley<br />
Jackshaft Drive Belt (Disengaged)<br />
2. Reverse the removal procedure to replace the<br />
jackshaft drive belt.<br />
Jackshaft<br />
Idler Arm<br />
Jackshaft<br />
Drive Belt<br />
Tension Spring<br />
Engine<br />
Pulley<br />
Jackshaft Drive Belt (Engaged)<br />
66
Change language