KUKA Posiflex - KUKA Robotics
KUKA Posiflex - KUKA Robotics
KUKA Posiflex - KUKA Robotics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6 Planning<br />
6 Planning<br />
6.1 Mounting base with centering, KPF3-V2H250<br />
Description<br />
This section describes the mounting base of the positioner KPF3-V2H250.<br />
The positioner is installed and secured on the floor, directly onto the concrete<br />
foundation. The surface of the foundation must be level and smooth. The minimum<br />
dimensions must be observed.<br />
The mounting base with centering consists of:<br />
• Bedplates<br />
• Resin-bonded anchors<br />
• Fasteners<br />
Fig. 6-1: Mounting base with centering, KPF3-V2H250<br />
1 Hexagon bolt 3 Resin-bonded anchor<br />
2 Bedplate 4 Pin for centering<br />
Grade of concrete<br />
for foundations<br />
Dimensioned<br />
drawing<br />
When producing foundations from concrete, observe the load-bearing capacity<br />
of the ground and the country-specific construction regulations. The concrete<br />
must have no cracks and fulfill the following norms for quality:<br />
• C20/25 according to DIN EN 206-1:2001/DIN 1045-2:2001<br />
The following illustrations provide all the necessary information on the mounting<br />
base, together with the required foundation data.<br />
Issued: 22.05.2012 Version: Spez KPF3-V2H V3 en<br />
39 / 67
Change language