KUKA Posiflex - KUKA Robotics
KUKA Posiflex - KUKA Robotics
KUKA Posiflex - KUKA Robotics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>KUKA</strong> <strong>Posiflex</strong><br />
Type of load KPF3-V2H250 KPF3-V2H500<br />
KPF3-V2H750<br />
KPF3-V2H1000<br />
M k = tilting moment M kmax = 21,600 Nm M kmax = 49,000 Nm M kmax = 84,500 Nm<br />
M r = torque about A7 M rmax = 18,400 Nm M rmax = 38,000 Nm M rmax = 45,500 Nm<br />
4.5 Additional data<br />
Accessories<br />
Only accessories authorized by <strong>KUKA</strong> Roboter GmbH for this positioner may<br />
be used. All items of equipment must possess the appropriate certification and<br />
declarations of conformity.<br />
Options • Application-specific energy supply system:<br />
• Air, control/parameter cable, ground, water<br />
• Signal transmission by bus cable (Profibus)<br />
• Insulation of the face plates<br />
• Support strips for fixtures<br />
• Planetary axis with integrated routing of energy supply system<br />
• Working range monitoring<br />
• Weld current return cable<br />
• Rotary distributor<br />
• Anti-glare equipment<br />
• Bedplates<br />
4.6 Plates and labels<br />
Plates and labels<br />
The following plates, labels and signs are attached to the positioner. They<br />
must not be removed or rendered illegible. Illegible plates, labels and signs<br />
must be replaced.<br />
22 / 67 Issued: 22.05.2012 Version: Spez KPF3-V2H V3 en