o_195h4n6al16jb186b1b2qs7fgssa.pdf

Recommendations

Info

ADC_INT_PRI_5 ADC_INT_PRI_6 ADC_INT_PRI_7 Return Value: None Remarks: This function clears the Interrupt Flag (ADIF) bit and then sets the interrupt priority and enables/disables the interrupt. Source File: ConfigIntADC12.c Code Example: ConfigIntADC12(ADC_INT_PRI_6 & ADC_INT_ENABLE); ConvertADC12 Description: This function starts A/D conversion. Include: adc12.h Prototype: void ConvertADC12(void); Arguments: None Return Value: None Remarks: This function clears the ADCON1 bit and thus stops sampling and starts conversion. This happens only when trigger source for the A/D conversion is selected as Manual, by clearing the ADCON1 bits. Source File: ConvertADC12.c Code Example: ConvertADC12(); ADC_SAMPLES_PER_INT_16 Chế độ đệm chọn ADC_ALT_BUF_ON ADC_ALT_BUF_OFF Chế độ mẫu thay thế đầu vào chọn ADC_ALT_INPUT_ON ADC_ALT_INPUT_OFF config3 này chứa các thông số phải được cấu hình trong ADCON3 đăng ký theo quy định dưới đây: Bit Thời gian tự động mẫu ADC_SAMPLE_TIME_0 ADC_SAMPLE_TIME_1 ..... ADC_SAMPLE_TIME_30 ADC_SAMPLE_TIME_31 Chuyển đổi đồng hồ Nguồn chọn ADC_CONV_CLK_INTERNAL_RC ADC_CONV_CLK_SYSTEM OpenADC12 (Tiếp theo) dsPIC ® Thư viện Công cụ Ngôn ngữ OpenADC12 DS51456B trang 98 2004 Microchip Technology Inc Description: This function configures the ADC. Include: adc12.h Prototype: void OpenADC12(unsigned int config1, unsigned int config2, unsigned int config3, unsigned int configport, unsigned int configscan) Arguments: config1 This contains the parameters to be configured in the ADCON1 register as defined below: Module On/Off ADC_MODULE_ON ADC_MODULE_OFF Idle mode operation ADC_IDLE_CONTINUE ADC_IDLE_STOP ConfigIntADC12 (Continued) Đồng hồ chuyển đổi chọn ADC_CONV_CLK_Tcy2 ADC_CONV_CLK_Tcy ADC_CONV_CLK_3Tcy2 ..... ADC_CONV_CLK_32Tcy configport này chứa pin chọn được cấu hình vào ADPCFG đăng ký theo quy định dưới đây: ENABLE_ALL_ANA ENABLE_ALL_DIG ENABLE_AN0_ANA ENABLE_AN1_ANA ENABLE_AN2_ANA ..... ENABLE_AN15_ANA configscan này bao gồm các lựa chọn tham số quét là
dsPIC Peripheral Libraries 2004 Microchip Technology Inc. DS51456B-page 97 Result output format ADC_FORMAT_SIGN_FRACT ADC_FORMAT_FRACT ADC_FORMAT_SIGN_INT ADC_FORMAT_INTG Conversion trigger source ADC_CLK_AUTO ADC_CLK_TMR ADC_CLK_INT0 ADC_CLK_MANUAL Auto sampling select ADC_AUTO_SAMPLING_ON ADC_AUTO_SAMPLING_OFF Sample enable ADC_SAMP_ON ADC_SAMP_OFF config2 This contains the parameters to be configured in the ADCON2 register as defined below: Voltage Reference ADC_VREF_AVDD_AVSS ADC_VREF_EXT_AVSS ADC_VREF_AVDD_EXT ADC_VREF_EXT_EXT Scan selection ADC_SCAN_ON ADC_SCAN_OFF Number of samples between interrupts ADC_SAMPLES_PER_INT_1 ADC_SAMPLES_PER_INT_2 ..... ADC_SAMPLES_PER_INT_15 ADC_SAMPLES_PER_INT_16 Buffer mode select ADC_ALT_BUF_ON ADC_ALT_BUF_OFF Alternate Input Sample mode select ADC_ALT_INPUT_ON cấu hình vào sổ đăng ký theo quy định ADCSSL dưới đây: SCAN_NONE SCAN_ALL SKIP_SCAN_AN0 SKIP_SCAN_AN1 ..... SKIP_SCAN_AN15 Trở lại giá trị: Không Ghi chú: Chức năng này cấu hình ADC cho các thông số sau: Chế độ hoạt động, hành vi chế độ Sleep, dữ liệu o / p định dạng, mẫu CLK Nguồn, VREFsource, Số mẫu / int, đệm chế độ Fill, thay thế i / p mẫu mod, tự động thời gian mẫu, Convclock nguồn, Conv Đồng hồ Chọn bit, các bit Cảng Config kiểm soát. Source File: OpenADC12.c Mã số Ví dụ: OpenADC12 (ADC_MODULE_OFF & ADC_IDLE_CONTINUE & ADC_FORMAT_INTG & ADC_AUTO_SAMPLING_ON, ADC_VREF_AVDD_AVSS & ADC_SCAN_OFF & ADC_BUF_MODE_OFF & ADC_ALT_INPUT_ON & ADC_SAMPLES_PER_INT_15, ADC_SAMPLE_TIME_4 & ADC_CONV_CLK_SYSTEM & ADC_CONV_CLK_Tcy, ENABLE_AN0_ANA, SKIP_SCAN_AN1 & SKIP_SCAN_AN2 & SKIP_SCAN_AN5 & SKIP_SCAN_AN7); OpenADC12 (Tiếp theo) dsPIC Thư viện ngoại vi 2004 Microchip Technology Inc DS51456B trang 99 ReadADC12 Mô tả: Chức năng này đọc ADC Bufferregister trong đó có các giá trị chuyển đổi. Bao gồm: adc12.h
Page 1 and 2:
2004 Microchip Technology Inc. DS51
Page 3 and 4:
dsPIC ®LANGUAGE TOOLS LIBRARIES 20
Page 5 and 6:
215 4.11 variable argument lists .
Page 7 and 8:
and macros for standard C operation
Page 9 and 10:
This documentation is provided on t
Page 11 and 12:
• Development Systems Information
Page 13 and 14:
data section. The alternate startup
Page 15 and 16:
specific libraries.) When compiling
Page 17 and 18:
esults will occur when the function
Page 19 and 20:
A batch file named makedsplib.batis
Page 21 and 22:
-15 or smaller than -1.0. Analogous
Page 23 and 24:
CORCON saved, used, restored DOand
Page 25 and 26:
fractional* srcV ); Arguments: numE
Page 27 and 28:
VectorCorrelateis 4 less than whate
Page 29 and 30:
less than or equal to any previous
Page 31 and 32:
Remarks: The negated value of 0x800
Page 33 and 34:
Cycles (including C-function call a
Page 35 and 36:
plus program words from VectorCopy
Page 37 and 38:
Prototype: extern fractional* Black
Page 39 and 40:
); Arguments: numElems number of el
Page 41 and 42:
the base address of the matrix. Bec
Page 43 and 44:
in default RAM memory space (X-Data
Page 45 and 46:
0 ≤i < numRows1 0 ≤j < numCols2
Page 47 and 48:
20 + 3(numRows*numCols) MatrixSubtr
Page 49 and 50:
(of the same dimension) whose eleme
Page 51 and 52:
history of the filter. After perfor
Page 53 and 54:
Oppenheim and Ronald Schafer’s Di
Page 55 and 56:
modulo buffer. Source samples, x[n]
Page 57 and 58:
FIRDelayInit Description: FIRDelayI
Page 59 and 60:
filter. Include: dsp.h Prototype: e
Page 61 and 62:
FIRStruct* filter, fractional* refS
Page 63 and 64:
energyEstimate estimated energy val
Page 65 and 66:
fractional* delayBase ); Arguments:
Page 67 and 68: Source File: iircan.asm DSP Library
Page 69 and 70: srcSamps pointer to source samples
Page 71 and 72: } IIRTransposedStruct; extern fract
Page 73 and 74: no REPEATinstructions Program words
Page 75 and 76: Language Tools Libraries DS51456B-p
Page 77 and 78: for instance if: a = Op1 (b, c), wi
Page 79 and 80: and stores the results in the desti
Page 81 and 82: Description: DCTIPcomputes the Disc
Page 83 and 84: int log2N, fractcomplex* dstCV, fra
Page 85 and 86: fractcomplex* srcCV, fractcomplex*
Page 89 and 90: value can be calculated using the i
Page 91 and 92: A complex vector of size N/2 must h
Page 93 and 94: specific libraries. When compiling
Page 95 and 96: Control I/O pin definitions RW_PIN
Page 97 and 98: y calling the BusyXLCD()function. T
Page 99 and 100: COM1_COM16 COM16_COM1 Display On/Of
Page 101 and 102: Source File: CAN1AbortAll.c CAN2Abo
Page 103 and 104: char CAN2IsRXPassive(void); Argumen
Page 105 and 106: CAN2SendMessage Description: This f
Page 107 and 108: CAN2SetMask Description: This funct
Page 109 and 110: CAN_IDLE_CON_NO_WAITCAN On in Idle
Page 113 and 114: CAN_INDI_INVMESS_DIS CAN_INDI_WAK_D
Page 115 and 116: { /* Length of data tobe transmitte
Page 117: Return Value: If the value of DONE
Page 121 and 122: ..... SKIP_SCAN_AN15 Return Value:
Page 123 and 124: DS51456B-page 100 3.5.2 Individual
Page 125 and 126: 3.6 ADC10 FUNCTIONS This section co
Page 127 and 128: Module On/Off ADC_MODULE_ON ADC_MOD
Page 129 and 130: ADPCFG register as defined below: E
Page 131 and 132: ADC_CHX_NEG_SAMPLEB_AN6AN7AN8 ADC_C
Page 133 and 134: Scanselect = SKIP_SCAN_AN2 & SKIP_S
Page 135 and 136: dsPIC ® Language Tools Libraries D
Page 137 and 138: void OpenTimer4(unsigned int config
Page 139 and 140: Tx_SOURCE_EXT Tx_SOURCE_INT period
Page 141 and 142: 3.7.2 Individual Macros WriteTimer2
Page 143 and 144: SetPriorityIntT4 SetPriorityIntT5 D
Page 145 and 146: Code Example: char reset_state; res
Page 147 and 148: Arguments: None Remarks: This macro
Page 149 and 150: stored into CNPU2 register. The upp
Page 151 and 152: SetPriorityInt2 SetPriorityInt3 Set
Page 153 and 154: IC_INT_PRIOR_3 IC_INT_PRIOR_4 IC_IN
Page 155 and 156: ReadCapture3 ReadCapture4 ReadCaptu
Page 157 and 158: dsPIC ® Language Tools Libraries D
Page 159 and 160: void CloseOC4(void); void CloseOC5(
Page 161 and 162: Include: outcompare.h Prototype: vo
Page 163 and 164: Include: outcompare.h Prototype: un
Page 165 and 166: SetDCOC3PWM SetDCOC4PWM SetDCOC5PWM
Page 167 and 168: Code Example: pulse_start = 0x40 ;
Page 169 and 170:
T3CON = 0x8000; T1CON = 0X8000; /*
Page 171 and 172:
Transmit Interrupt Priority UART_TX
Page 173 and 174:
UART_1STOPBIT config2 This contains
Page 175 and 176:
Source File: WriteUART1.c WriteUART
Page 177 and 178:
Code Example: EnableIntU2TX; Disabl
Page 179 and 180:
ConfigIntUART1(UART_RX_INT_EN & UAR
Page 181 and 182:
DCI_INT_PRI_4 DCI_INT_PRI_5 DCI_INT
Page 183 and 184:
DCI_FRAME_LEN_15 DCI_FRAME_LEN_14 .
Page 185 and 186:
Prototype: unsigned int ReadDCI(uns
Page 187 and 188:
contents are sent duringthe timeslo
Page 189 and 190:
SPI_INT_PRI_4 SPI_INT_PRI_5 SPI_INT
Page 191 and 192:
Prototype: void WriteSPI1(unsigned
Page 193 and 194:
Remarks: This functions initializes
Page 195 and 196:
2004 Microchip Technology Inc. DS51
Page 197 and 198:
SEC_PRESCAL_7_1 & PRI_PRESCAL_64_1;
Page 199 and 200:
enables/disables the interrupt. Sou
Page 201 and 202:
QEI_QE_CLK_DIVIDE_1_32 QEI_QE_CLK_D
Page 203 and 204:
} int main(void) { unsigned int max
Page 205 and 206:
dsPIC ® Language Tools Libraries D
Page 207 and 208:
PWM_PEN2H PWM_PDIS2H PWM_PEN1H PWM_
Page 209 and 210:
PWM_POUT_1L Bit defines related to
Page 211 and 212:
PWM_DTS3I_UA PWM_DTS3I_UB Dead Time
Page 213 and 214:
PWM_OVA3H_INACTIVE PWM_OVA2H_INACTI
Page 215 and 216:
Language Tools Libraries DS51456B-p
Page 217 and 218:
#include #include void __attribute
Page 219 and 220:
Prototype: void ConfigIntI2C(unsign
Page 221 and 222:
Arguments: None Return Value None R
Page 223 and 224:
a #definestatement in the i2c.h Sou
Page 225 and 226:
I2C_IDLE_CON SCL Release Control bi
Page 227 and 228:
i2c_data_wait This is the timeout c
Page 229 and 230:
3.17.2 Individual Macros StartI2C D
Page 231 and 232:
Arguments: None Remarks: This macro
Page 233 and 234:
• src\libm- source code for math
Page 235 and 236:
Remarks: The expression evaluates t
Page 237 and 238:
if (isalpha(ch)) printf("# is alpha
Page 239 and 240:
Remarks: A character is considered
Page 241 and 242:
ch = '&'; if (isprint(ch)) printf("
Page 243 and 244:
Page 245 and 246:
int ch; ch = 'B'; printf("B changes
Page 247 and 248:
Page 249 and 250:
DBL_MIN_10_EXP Description: Minimum
Page 251 and 252:
Include: Value: 1 Remarks: Rounds
Page 253 and 254:
Description: Maximum value of a lon
Page 255 and 256:
Page 257 and 258:
abort - terminating See the example
Page 259 and 260:
Page 261 and 262:
} Output: Illegal instruction execu
Page 263 and 264:
must be at least one named argument
Page 265 and 266:
Include: Prototype: #define va_end
Page 267 and 268:
to perform input and output operati
Page 269 and 270:
_IOLBF Description: Indicates line
Page 271 and 272:
Include: Prototype: void clearerr(
Page 273 and 274:
Include: Prototype: int feof(FILE
Page 275 and 276:
Error indicator reset Standard C Li
Page 277 and 278:
fpos_t pos; char buf[25]; if ((myfi
Page 279 and 280:
Description: Opens a file. Include:
Page 281 and 282:
Explanation: afile1must exist befor
Page 283 and 284:
Arguments: s string to be written s
Page 285 and 286:
10.0/2 = 5.000000 10.0/3 = 3.333333
Page 287 and 288:
Explanation: This program uses myfi
Page 289 and 290:
SEEK_CUR- seeks from the current po
Page 291 and 292:
*pos if successful; otherwise, fset
Page 293 and 294:
if ((myfile = fopen("afile.out", "r
Page 295 and 296:
10.0/2 = 5.000000 10.0/3 = 3.333333
Page 297 and 298:
Return Value: Returns the character
Page 299 and 300:
Standard C Libraries with Math Func
Page 301 and 302:
e, E doublein scientific notation f
Page 303 and 304:
putchar Description: Put a characte
Page 305 and 306:
Output: File renamed dsPIC ® Langu
Page 307 and 308:
® Language Tools Libraries DS51456
Page 309 and 310:
setbuf(myfile1, NULL); printf("myfi
Page 311 and 312:
int main(void) { char sbuf[100], s[
Page 313 and 314:
Include: Prototype: char *tmpnam(c
Page 315 and 316:
ungetc (Continued) Standard C Libra
Page 317 and 318:
va_list ap; va_start(ap, fmt); prin
Page 319 and 320:
with operands of type long. Include
Page 321 and 322:
i = -2; printf("The absolute value
Page 323 and 324:
Page 325 and 326:
(int) strtol(s,0,10)except it does
Page 327 and 328:
eturn 0; else return 1; } Output: S
Page 329 and 330:
printf("For div(%d, %d)\n", x, y);
Page 331 and 332:
free Description: Frees memory. Inc
Page 333 and 334:
printf("The absolute value of %7ld
Page 335 and 336:
is undefined. malloc Description: A
Page 337 and 338:
with the key Remarks: qsortoverwrit
Page 339 and 340:
object. If reallocsucceeds in alloc
Page 341 and 342:
optional whitespace, followed by an
Page 343 and 344:
® Language Tools Libraries DS51456
Page 345 and 346:
Prototype: size_t wcstombs(char *s,
Page 347 and 348:
characters in s2and returns a value
Page 349 and 350:
printf("\n"); memcpy(buf1, buf3, 5)
Page 351 and 352:
printf("\n"); printf("memset(\"%s\"
Page 353 and 354:
printf("buf1 : %s\n\n", buf1); ptr
Page 355 and 356:
uf3 : Why? buf2 comes before buf1 b
Page 357 and 358:
str1, str2, res); res = strcspn(str
Page 359 and 360:
(string length = 11 characters) str
Page 361 and 362:
s2 second string n number of charac
Page 363 and 364:
printf("buf1 : %s\n", buf1); printf
Page 365 and 366:
contained in s2. Example: #include
Page 367 and 368:
else printf("%c not found\n", ch2);
Page 369 and 370:
printf("\"%s\" found at position %d
Page 371 and 372:
Output: str1 : Here, on top of the
Page 373 and 374:
MMMis month of the year ddis day of
Page 375 and 376:
Page 377 and 378:
printf("Local time = %s\n", asctime
Page 379 and 380:
Example: #include /* for strftime,
Page 381 and 382:
(in magnitude) to be represented in
Page 383 and 384:
Argument: x value between -1 and 1
Page 385 and 386:
y = atan (x); printf("The arctangen
Page 387 and 388:
if (errno) perror("Error"); printf(
Page 389 and 390:
for (i=0; i
Page 391 and 392:
} Output: The cosine of -1.000000 i
Page 393 and 394:
Error: range error The hyperbolic c
Page 395 and 396:
errno = 0; x = -1E3; y = exp (x); i
Page 397 and 398:
y = fabs (x); printf("The absolute
Page 399 and 400:
-2.0F, -1.75F, -1.5F, -1.25F}; floa
Page 401 and 402:
x, y, z); errno = 0; x = 7.0; y = 0
Page 403 and 404:
perror("Error"); printf("For fmodf
Page 405 and 406:
Return Value: Returns the fraction,
Page 407 and 408:
printf("For a number = %fand an exp
Page 409 and 410:
ldexpf(-0.625000, 2) = -2.500000 Fo
Page 411 and 412:
x, y); errno = 0; x = 0.0; y = log1
Page 413 and 414:
NaN is returned if xis a negative n
Page 415 and 416:
Arguments: x single precision float
Page 417 and 418:
Page 419 and 420:
The sine of -1.000000 is -0.841471
Page 421 and 422:
The hyperbolic sine of 0.000000 is
Page 423 and 424:
Error: domain error The square root
Page 425 and 426:
Return Value: Returns the tangent o
Page 427 and 428:
x, y); } Output: The hyperbolic tan
Page 429 and 430:
the calling process's data segment.
Page 431 and 432:
eginning of the file. A return valu
Page 433 and 434:
through the simulator. The return v
Page 435 and 436:
uffer points to the storage locatio
Page 437 and 438:
div.sd __builtin_divud Description:
Page 439 and 440:
mul.uu dsPIC ® Language Tools Libr
Page 441 and 442:
Return Value: Returns the psv page
Page 443 and 444:
__builtin_mulus ...................
Page 445 and 446:
arcsine Double Floating Point......
Page 447 and 448:
Set Priority Macro.................
Page 449 and 450:
isxdigit...........................
Page 451 and 452:
String to Unsigned LongInteger ....
Page 453 and 454:
DCT................................
Page 455 and 456:
EnableIntlCx.......................
Page 457 and 458:
Single Floating Point .............
Page 459 and 460:
DBL_MAX_10_EXP ....................
Page 461 and 462:
Single Floating Point..............
Page 463 and 464:
tanhf .............................
Page 465 and 466:
Set Capture Interrupt Priority ....
Page 467 and 468:
ldiv_t ............................
Page 469 and 470:
long long unsigned int Maximum Valu
Page 471 and 472:
MatrixInvert ......................
Page 473 and 474:
Single Floating Point..............
Page 475 and 476:
system.............................
Page 477 and 478:
Quick Sort ........................
Page 479 and 480:
SEEK_SET...........................
Page 481 and 482:
Minimum Value .....................
Page 483 and 484:
va_arg ............................
Page 485 and 486:
atoi ..............................
Page 487 and 488:
strncpy ...........................
Page 489 and 490:
Write..............................
Page 491 and 492:
unsigned short int Maximum Value ..
Page 493 and 494:
Zero, divide by....................
Page 495 and 496:
Tel: 86-532-502-7355 Fax: 86-532-50
show all

o_195h4n6al16jb186b1b2qs7fgssa.pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?