CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10 Preparations for the new season<br />
5.<br />
8.<br />
1. Open the fuel supply cock.<br />
2 Charge the battery(ies), if necessary.<br />
3. Connect the battery cables.<br />
4. Verify that the cover of the raw water cooling<br />
strainer is tightened well.<br />
5. Insert the impeller that you have removed during<br />
winterpreparation (page 24). Verify the tightness of the<br />
raw water pump cover and of all drain plugs.<br />
6. If you have disconnected any hoses before winter<br />
storage, these must all be connected again and<br />
tightened well.<br />
7. Open the seacock of the raw water entry.<br />
8. Check the level of the cooling liquid, as described<br />
on page 23.<br />
9. Make sure that the engine has sufficient lubrication<br />
oil, as described on page 20.<br />
10. Start the engine and make sure that there are no<br />
leaks in the fuel system, the cooling system and the<br />
exhaust assembly. Place a bucket underneath the<br />
exhaust exit to catch any excessive antifreeze while<br />
starting the engine. Anti freeze is poisonous and must<br />
be disposed of correctly.<br />
11. Verify the proper functioning of all electronic parts<br />
and all engine instruments. Also verify the proper<br />
functioning of the mechanical remote control of throttle<br />
and gearbox.<br />
12. Check exhaust for cooling water.<br />
32 Crafted with CRAFTSMAN MARINE