CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance and inspection<br />
8<br />
Draining of the water separator<br />
To drain the water separator:<br />
• Open the drain plug at the bottom of the filter<br />
housing.<br />
• Drain the water and collect it in a bowl. Close the<br />
drain plug.<br />
Note: a water separator does not belong<br />
to the standard scope of supply, but<br />
must be procured and fitted nonetheless<br />
(AH.010.20008).<br />
Bleeding of the fuel system<br />
After having drained the water separator/fuel filter, the<br />
fuel system must be freed from air (‘bled’).<br />
The fuel system is self-bleeding and this goes as<br />
follows: Turn the key in the start switch in the ‘ON’<br />
position and after about 1 minute the fuel lift pump will<br />
begin to operate and bleed the system automatically.<br />
Danger<br />
Do not smoke when you drain liquids<br />
from engine or filters. Keep open fire<br />
away from the location. Remove any<br />
spilled oil or liquids before starting the<br />
engine.<br />
Crafted with CRAFTSMAN MARINE<br />
27