CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8 Maintenance and inspection<br />
Remove the fuel filter Fit the fuel filter Cleaning the filter of the fuel lift pump<br />
After the first 50 hours of service:<br />
Replace the fuel filter, as described here. Future<br />
replacement must take place in accordance with the<br />
maintenance schedule (page 19).<br />
Close-off the fuel supply to the engine. Remove the<br />
entire filter with the aid of a special tool. It is possible<br />
that the filter still contains some fuel, which please<br />
collect and treat it in accordance with the environmental<br />
directives in your country.<br />
Clean the surface to touch the engine before fitting the<br />
filter. Grease the rubber ring with clean engine oil. Fill<br />
the filter with clean diesel fuel. Position the filter<br />
against the filter housing and tighten it with one half to<br />
three quarters of a turn.<br />
After changing the fuel filter element the fuel system<br />
must be bled (see next page).<br />
When changing the fuel filter, the filter of the fuel lift<br />
pump must also be cleaned. This should only be done<br />
by a qualified mechanic. Consult your dealer.<br />
Do not smoke when working at or<br />
around the fuel system and avoid open<br />
fire.<br />
26 Crafted with CRAFTSMAN MARINE