CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
CM4.65 & CM4.80 - Craftsman Marine BV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Engine operation<br />
5<br />
Monitoring lights oil pressure and battery charging<br />
current<br />
Make sure that the monitoring lights for oil pressure and<br />
charging current are extinguished and that the buzzer is<br />
silent. Check if cooling water is coming out of the exhaust<br />
line. If not so, stop the engine IMMEDIATELY.<br />
Electric engine stop<br />
Before stopping the engine, shift the throttle lever back to<br />
its neutral position, place the gearbox lever into the neutral<br />
position and let the engine idle during a few moments. Turn<br />
the starter key to the ‘OFF’ position to stop the engine. After<br />
a long trip it is recommended to have the engine idling for a<br />
few minutes, before putting it to full stop.<br />
Never turn the electric main switch to the<br />
‘off’ position when the engine is running.<br />
Close the seacock of the raw water inlet and turn the main<br />
electrical switch to the off position, if the engine will not be<br />
used during a prolonged period of time.<br />
Also: do not turn the starter switch to the<br />
‘start’ position when the engine is<br />
running. This may cause serious damage<br />
to the starter motor.<br />
Crafted with CRAFTSMAN MARINE<br />
17