Part Number 150216C - Twin Air

Mounting Instructions PowerFlow Kit
Instructions:
Part Number 150216C
PowerFlow Kit HONDA CRF 150R (Mini Racer) (L.C)
(incl. Air Filter (FR), Aluminium Cage, Sealing Ring and Mounting Hardware)
1. Remove the original outside air boot sealing ring, rubber air boot, and inner
airbox sealing ring.
2. Before installing the Twin Air Inner Sealing Ring, use a silicone sealant to fill
the machined groove in the Twin Air Inner Sealing Ring.
3. Install the Twin Air Inner Sealing Ring into the airbox, install rubber air boot,
and outer air boot sealing ring and tightly fasten bolts.
4. Clean off the excess silicone after you have tightened the Twin Air Inner Ring
to the airbox.
5. When you are done assembling, you will have to cut off the rubber lip on the
inside of the rubber air boot.
6. Install Twin Air filter (150.216FR) making sure the pin on the filter cage aligns
with the Twin Air Inner Sealing Ring.
If you have any other questions feel free to contact us. For contact information go to
www.twinair.com or www.twinairusa.com.
16-01-2012 Page 1 of 2

Mounting Instructions PowerFlow Kit
Twin Air Parts and Accessories
- PowerFlow Replacement Air Filter: #150216FR
- Replacement Oil Filter: #140003
- Air Box Wash Cover: #160052
Twin Air Cleaning and Oiling Products
- Bio Dirt Remover: #159004
- Liquid Bio Power: #159017
- Bio Pack (Dirt Remover / Liquid Power): #159020
- Bio Spray: #159018M
- Twin Air Bio System: #159000BIO
For more details or to purchase these or other Twin Air products go to www.twinair.com,
www.twinairusa.com or visit your local Twin Air Authorized Dealer.
16-01-2012 Page 2 of 2