Grass Katalog EN 2012

technicAL dAtA
Connections
pneumatic 6 bar dry
Weight
type 1.2 m 480 kg
type 1.4 m 500 kg
AcceSSorieS for wooden BAcK PAneLS
AcceSSorieS for SteeL BAcK PAneLS
05-2011
Dimensions type 1.2 m
Width 2.30 m
Depth 1.00 m
height 1.95 m
AcceSSorieS for wooden And SteeL BAcK PAneLS
ASSemBLy technoLoGy
tecmAtor ZP-3n
drAwer PreSS
Dimensions type 1.4 m
Width 2.50 m
Depth 1.00 m
height 1.95 m
Designation item no.
press-in bracket set for nova pro Deluxe drawer sides h90 f146095266
press-in bracket set for nova pro Deluxe drawer sides h122 f146095162
press-in bracket set for nova pro classic drawer sides h63, h90, h122 f146095161
stops for back panel height, 10 mm (4x) 4 f146088918
Designation item no.
press-in bracket set for nova pro Deluxe drawer sides h90 f146095164
press-in bracket set for nova pro Deluxe drawer sides h122 f146095223
press-in bracket set for nova pro classic drawer sides h63 f146095485
press-in bracket set for nova pro classic drawer sides h90 f146095163
press-in bracket set for nova pro classic drawer sides h122 f146095222
pneumatic support for press fitting steel back panels f146095160
Designation item no.
insertion cylinder for additional slide length 350 1 f146093594
insertion cylinder for additional slide lengths 600/650 1 f146092328
reset stop for drawers, intervals 50 2 f146092604
reset stop for inset drawers, intervals 25 3 f146095520
holding device for nova pro classic drawer sides h63, h90, h122,
f146095106
for left- and right-hand use
holding device for nova pro Deluxe drawer sides h90, for left- and right-hand use f146094588
holding device for nova pro Deluxe drawer sides h122, for left- and right-hand
f146095265
use
1 For slide lengths 350, 600 and 650 mm additional insertion cylinders are required for press fitting. note: Not included in standard module
2 For each drawer, you need 1 reset stop for each drawer width.
note: The standard module contains 7 reset stops for machine type 1.2 m and 9 reset stops for machine type 1.4 m
3 For each inset drawer, you need 1 reset stop for each inset drawer width. note: Not included in standard module
4 Included in the standard specification
All dimensions in millimetres. Subject to changes the cAtAlogue Grass 787
1
2
3
4
5
6
7
8