Grass Katalog EN 2012

More documents

Recommendations

Info

1 2 3 4 5 6 7 8 noVA Pro cLASSic technical information inStALLAtion informAtion Installation dimensions for Nova Pro Deluxe and Classic installation advice installation dimension: 58 mm Bottom panel thickness 16 mm full extension drawer fastening: euro screws Ø 6 x min. 13 mm Drilling depth - 13 mm front hook: chipboard screw Ø 3.5 x min. 11 mm, head Ø max. 7 mm AdjUStment 480 <strong>Grass</strong> the cAtAlogue Packaging units are not covered in this catalogue; please enquire with your supplier 05-2011 FR KV 1.0 L= NL + 3 FL - RW = BL Height adjustment with eccentric screw Side adjustment Front tilt angle adjustment 2 3 • height adjustment: slightly release screw 2 and move front to the desired height position using eccentric screw 3. Adjustment range ±2 mm • tighten screw 2. front SUPPort fASteninG 1 1 • side adjustment: slightly push clamping lever 1 towards the back, lift front slightly and move across serration, adjustment range ±1.5 mm • release clamping lever. For screw fixing with tilt angle adjustment With dowel with tilt angle adjustment nova pro crystal Deluxe 406 nova pro Deluxe 416 nova pro crystal classic 446 nova pro classic 460 + - RW 16 + - • new for drawer sides height 122 • tilt adjustment is easily accessible on the inside of the drawer. tilt angle adjustment is achieved by changing the position of the drawer. + -
AiLinG fASteninG with tiLt AnGLe AdjUStment for PreSS fittinG Front Back panel Rectangular railing divider rAiLinG fASteninG with tiLt AnGLe AdjUStment for Screw fiXinG Front Back panel LonGitUdinAL rectAnGULAr rAiLinG diVider For screw fixing For press fitting LeGend BL Bottom panel length FL Slide length FR Front KV Front edge of cabinet 05-2011 L Length NL Nominal length NV Tilt angle adjustment RW Back panel drAwer SyStemS noVA Pro cLASSic technicAL informAtion All dimensions in millimetres. Subject to changes the cAtAlogue <strong>Grass</strong> 481 1 2 3 4 5 6 7 8
Page 1 and 2:
MOVEMENT SYSTEMS THE CATALOGUE 2011
Page 3 and 4:
MoveMent SySteMS tHe cAtAloGue 2011
Page 5 and 6:
GrASS WorlDWiDe A globally successf
Page 7 and 8:
GrASS movement sYstems A piece of f
Page 9 and 10:
movement is green. colour has an im
Page 11 and 12:
KinVAro FlAp sYstems whether high-g
Page 13 and 14:
KinVAro FlAp sYstems Whichever flap
Page 15 and 16:
tiomoS hinge sYstem with tiomos a v
Page 17 and 18:
You can tell the quality of a hinge
Page 19 and 20:
dynAPro sliDe sYstem high load capa
Page 21 and 22:
dynAPro sliDe sYstem Whether you ar
Page 23 and 24:
noVA Pro DrAWer sYstem nova Pro - t
Page 25 and 26:
Furniture that meets exclusive tast
Page 27 and 28:
dwd XP DrAWer sYstem DWD Xp means t
Page 29 and 30:
the extraordinary running performan
Page 31 and 32:
tiPmAtic opening sYstem mechanical
Page 33 and 34:
SenSotronic sliDe sYstem Fully elec
Page 35 and 36:
QUAtUriS corner cABinet sYstems 31
Page 37 and 38:
making optimum use of storage space
Page 39 and 40:
Whether you want to drill a row of
Page 41 and 42:
it goes without saying that plannin
Page 43 and 44:
the development of complex movement
Page 45 and 46:
From 3D instruments for measuring p
Page 47 and 48:
enVironmentAL protection Since the
Page 49 and 50:
Kinvaro FlAp sYstems exclusive flap
Page 51 and 52:
05-2011 View Product description Il
Page 53 and 54:
05-2011 max. 120° max. 170 123 min
Page 55 and 56:
Flap systems.Kinvaro.L-80 parallel
Page 57 and 58:
Flap systems.Kinvaro.S-35 up-and-ov
Page 59 and 60:
Flap systems.Kinvaro.T-65 lift-up f
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Flap systems.Kinvaro.T-105 flap sta
Page 73 and 74:
Flap systems.Kinvaro.F-20 Adjustmen
Page 75 and 76:
Kinvaro. .S-35 adjustment options.
Page 77 and 78:
Kinvaro. .T-70 adjustment options.
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Flap systems.Kinvaro.T-105 adjustme
Page 85 and 86:
HinGe sYstems grAss hinge systems o
Page 87 and 88:
TioMos hinge sYstems tiomos - curre
Page 89 and 90:
Opening angle 120° 120° 120° 05-
Page 91 and 92:
05-2011 hinGe SyStemS tiomoS 110 11
Page 93 and 94:
order informAtion for driLLinG PAtt
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
driLLinG PAtternS 45/9.5 Screw fixi
Page 105 and 106:
Page 107 and 108:
05-2011 hinGe SyStemS tiomoS 110 AL
Page 109 and 110:
05-2011 Hinge systems tiomos 110/90
Page 111 and 112:
Page 113 and 114:
05-2011 hinGe SyStemS tiomoS 110/30
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Hinge systems.Tiomos 110/37E.+37°
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
05-2011 hinGe SyStemS tiomoS 120/-1
Page 139 and 140:
Page 141 and 142:
05-2011 hinGe SyStemS tiomoS 120/-3
Page 143 and 144:
Page 145 and 146:
Hinge systems.Tiomos 120/-45A.-45°
Page 147 and 148:
Page 149 and 150:
Hinge systems.Tiomos.Mounting plate
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
05-2011 hinGe SyStemS tiomoS AcceSS
Page 157 and 158:
Hinge systems.Tiomos. .Technical in
Page 159 and 160:
oPtionS for chAnGinG the door oVerL
Page 161 and 162:
05-2011 hinGe SyStemS tiomoS techni
Page 163 and 164:
neXis hinge sYstems the versatile n
Page 165 and 166:
neXis impresso Fast, tool-free inst
Page 167 and 168:
Opening angle 95° 05-2011 View Pro
Page 169 and 170:
Hinge systems.Nexis Impresso 04.100
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Hinge systems.Nexis Impresso 05/20/
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Hinge systems.Nexis Impresso 29/-14
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Hinge systems.Nexis Impresso.Mounti
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Hinge systems. Nexis Impresso.Acces
Page 205 and 206:
Hinge systems.Nexis Impresso. .Tech
Page 207 and 208:
teSt criteriA for hinGeS Functional
Page 209 and 210:
neXis clicK-on Quick-fit hinges for
Page 211 and 212:
Opening angle 125° 125° 125° 95
Page 213 and 214:
05-2011 hinGe SyStemS neXiS cLicK-o
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Hinge systems.Nexis Click-on.Mounti
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Hinge systems.Nexis Click-on.access
Page 269 and 270:
Hinge systems.Nexis Click-on. .Tech
Page 271 and 272:
Page 273 and 274:
neXis sliDe-on hinges for numerous
Page 275 and 276:
Opening angle 270° 180° - 95° 95
Page 277 and 278:
Hinge systems.Nexis Slide-on 04.100
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Hinge systems.Nexis Slide-on 05/30/
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Hinge systems.Nexis Slide-on PCC.Pi
Page 307 and 308:
Page 309 and 310:
Hinge systems.Nexis Slide-on 17 AL.
Page 311 and 312:
Hinge systems.Nexis Slide-on 17 GL.
Page 313 and 314:
Hinge systems.Nexis Slide-on.Mounti
Page 315 and 316:
Hinge systems.Nexis Slide-on.Mounti
Page 317 and 318:
Hinge systems.Nexis Slide-on.Access
Page 319 and 320:
Hinge systems.Nexis Slide-on. .Tech
Page 321 and 322:
Page 323 and 324:
sofT-CLose For neXis Damping system
Page 325 and 326:
Hinge systems.Soft-close. Impresso.
Page 327 and 328:
Hinge systems.Soft-close.Click-on.F
Page 329 and 330:
Hinge systems.170° Soft-close..For
Page 331 and 332:
Hinge systemsSoft-close.Mirro.For N
Page 333 and 334:
Hinge systems.Soft-close.ACC.For wo
Page 335 and 336:
Hinge systems.Soft-close.AL.For alu
Page 337 and 338:
Hinge systems.Soft-close Pin.Pneuma
Page 339 and 340:
TiPMaTiC For neXis the mechanical o
Page 341 and 342:
Hinge systems.Tipmatic Plus.Impress
Page 343 and 344:
05-2011 hinGe SyStemS tiPmAtic PLUS
Page 345 and 346:
Hinge systems.170° Tipmatic Plus..
Page 347 and 348:
Hinge systems.Tipmatic Plus.Mirro.F
Page 349 and 350:
05-2011 hinGe SyStemS tiPmAtic for
Page 351 and 352:
05-2011 hinGe SyStemS tiPmAtic for
Page 353 and 354:
05-2011 hinGe SyStemS tiomoS ASSemB
Page 355 and 356:
sPeCiaL HINGES hinges for special a
Page 357 and 358:
Hinge systems.Special hinges.90° f
Page 359 and 360:
Hinge systems.Special hinges.Mini-h
Page 361 and 362:
Hinge systems.Special hinges.Glass
Page 363 and 364:
Hinge systems.Special hinges.180°
Page 365 and 366:
Hinge systems.Special hinges.Glass
Page 367 and 368:
sinGLe-joinT hinges single-joint hi
Page 369 and 370:
Hinge systems.Single-joint hinges.S
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
05-2011 hinGe SyStemS SinGLe-joint
Page 381 and 382:
Hinge systems.Single-joint hinges.
Page 383 and 384:
CaBineT MaKinG Accessories small co
Page 385 and 386:
Hinge systems.Cabinet making access
Page 387 and 388:
05-2011 hinGe SyStemS cABinet mAKin
Page 389 and 390:
05-2011 hinGe SyStemS cABinet mAKin
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
. . . 05-2011 All dimensions in mil
Page 403 and 404:
Drawer sYstems versatile comprehens
Page 405 and 406:
nova Pro DrAWer sYstems the complet
Page 407 and 408:
nova Pro DeluXe the elegant, compre
Page 409 and 410:
05-2011 View Product description De
Page 411 and 412:
05-2011 drAwer SyStemS noVA Pro cry
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
05-2011 drAwer SyStemS noVA Pro deL
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434: 05-2011 drAwer SyStemS noVA Pro deL
Page 439 and 440: Drawer systems.Nova Pro.Steel back
Page 441 and 442: 05-2011 drAwer SyStemS noVA Pro fUL
Page 443 and 444: 05-2011 drAwer SyStemS noVA Pro tiP
Page 445 and 446: Drawer systems.Nova Pro Deluxe..Tec
Page 447 and 448: nova Pro clAssic the classic, compr
Page 449 and 450: 05-2011 View Product description De
Page 451 and 452: 05-2011 drAwer SyStemS noVA Pro cry
Page 459 and 460: 05-2011 drAwer SyStemS noVA Pro cLA
Page 479 and 480: 05-2011 drAwer SyStemS noVA Pro Ste
Page 481 and 482: 05-2011 drAwer SyStemS noVA Pro fUL
Page 483: 05-2011 drAwer SyStemS noVA Pro tiP
Page 487 and 488: nova Pro orgAnising AnD DiviDing sY
Page 489 and 490: 05-2011 drAwer SyStemS noVA Pro diV
Page 491 and 492: order informAtion for BottLe hoLder
Page 493 and 494: 05-2011 drAwer SyStemS noVA Pro orG
Page 495 and 496: eXtension moDule h65 For DrAWer siD
Page 497 and 498: order informAtion BAse moDule vArio
Page 499 and 500: APPLicAtion eXAmPLeS Example 2 outs
Page 501 and 502: For DrAWers 6 Spice rack insert (wi
Page 503 and 504: Drawer systems.Nova Pro organising
Page 505 and 506: Drawer systems.Nova Pro..Accessorie
Page 511 and 512: inStALLAtion informAtion installati
Page 513 and 514: inStALLAtion informAtion 05-2011 dr
Page 515 and 516: nova Pro sensoMaTiC electro-mechani
Page 517 and 518: 05-2011 View Product description Pa
Page 519 and 520: Drawer systems.Nova Pro Sensomatic.
Page 531 and 532: inStALLAtion informAtion 05-2011 dr
Page 533 and 534: Drawer systems.Nova Pro Sensomatic.
Page 535 and 536:
AdjUStment variable drive force not
Page 537 and 538:
DwD XP DrAWer sYstem the versatile,
Page 539 and 540:
DwD XP DrAWer sYstem elegantly desi
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
05-2011 drAwer SyStemS dwd XP drAwe
Page 547 and 548:
05-2011 drAwer SyStemS dwd XP inSet
Page 549 and 550:
05-2011 drAwer SyStemS dwd XP Pot d
Page 551 and 552:
05-2011 drAwer SyStemS dwd XP inSer
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
05-2011 drAwer SyStemS dwd XP inSet
Page 559 and 560:
05-2011 drAwer SyStemS dwd XP Add-o
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Drawer systems.DWD XP.Steel back pa
Page 585 and 586:
05-2011 drAwer SyStemS dwd XP fULL
Page 587 and 588:
05-2011 drAwer SyStemS dwd XP tiPmA
Page 589 and 590:
Drawer systems.DWD XP. .Technical i
Page 591 and 592:
Drawer systems.DWD XP. .Technical i
Page 593 and 594:
dwd XP DiviDing AnD orgAnising sYst
Page 595 and 596:
05-2011 drAwer SyStemS dwd XP diVid
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
05-2011 drAwer SyStemS dwd XP orGAn
Page 607 and 608:
Drawer systems.DWD XP.Organising sy
Page 609 and 610:
Drawer systems.DWD XP.Accessories.
Page 611 and 612:
05-2011 drAwer SyStemS APPLicAtion
Page 613 and 614:
Drawer systems.Application examples
Page 615 and 616:
Drawer systems.Application examples
Page 617 and 618:
DwD XP sensoMaTiC electro-mechanica
Page 619 and 620:
05-2011 View Product description Pa
Page 621 and 622:
Drawer systems.DWD XP Sensomatic.Si
Page 623 and 624:
Drawer systems.DWD XP Sensomatic.St
Page 625 and 626:
Drawer systems.DWD XP Sensomatic.St
Page 627 and 628:
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Drawer systems.DWD XP Sensomatic.In
Page 637 and 638:
Drawer systems.DWD XP Sensomatic.Di
Page 639 and 640:
sLiDe sYstems concealed slide syste
Page 641 and 642:
DynaPro sliDe sYstem A new slide ge
Page 643 and 644:
05-2011 SLide SyStemS dynAPro fULL
Page 645 and 646:
05-2011 SLide SyStemS dynAPro fULL
Page 647 and 648:
05-2011 SLide SyStemS dynAPro rAiLi
Page 649 and 650:
05-2011 SLide SyStemS dynAPro PULL-
Page 651 and 652:
05-2011 SLide SyStemS dynAPro ino(X
Page 653 and 654:
AdjUStment 05-2011 SLide SyStemS dy
Page 655 and 656:
DynaMoov sliDe sYstem the super-eff
Page 657 and 658:
05-2011 SLide SyStemS dynAmooV fULL
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
05-2011 SLide SyStemS dynAmooV rAiL
Page 665 and 666:
05-2011 SLide SyStemS dynAmooV PULL
Page 667 and 668:
05-2011 SLide SyStemS dynAmooV ino(
Page 669 and 670:
05-2011 SLide SyStemS technicAL inf
Page 671 and 672:
DynaMiC nT sliDe sYstem concealed s
Page 673 and 674:
05-2011 SLide SyStemS dynAmic nt Si
Page 675 and 676:
05-2011 SLide SyStemS dynAmic nt Si
Page 677 and 678:
05-2011 SLide SyStemS dynAmic nt rA
Page 679 and 680:
05-2011 SLide SyStemS dynAmic nt in
Page 681 and 682:
05-2011 SLide SyStemS dynAmic nt te
Page 683 and 684:
DynaPro sensoMaTiC electro-mechanic
Page 685 and 686:
Page 687 and 688:
Slide systems.Dynapro Sensomatic.Si
Page 689 and 690:
Slide systems.Dynapro Sensomatic.St
Page 691 and 692:
Slide systems.Dynapro Sensomatic.St
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
05-2011 SLide SyStemS dynAPro SenSo
Page 701 and 702:
Slide systems.Dynapro Sensomatic.In
Page 703 and 704:
Slide systems.Dynapro Sensomatic.Di
Page 705 and 706:
oLLer sYstems the classic range for
Page 707 and 708:
inTeGra ToP the single-wall drawer
Page 709 and 710:
Page 711 and 712:
05-2011 roLLer SyStemS inteGrA toP
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
Page 731 and 732:
Page 733 and 734:
order informAtion for drAwer diVide
Page 735 and 736:
Roller systems.Integra Top.Accessor
Page 737 and 738:
Roller systems.Integra Top.Technica
Page 739 and 740:
oLLer sLiDes sturdy single and full
Page 741 and 742:
05-2011 roLLer SyStemS roLLer SLide
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
AdjUStmentS Inserting the centre ra
Page 749 and 750:
Corner CaBineT sYstems intelligent
Page 751 and 752:
Corner cabinet systems.Quaturis S.C
Page 753 and 754:
Corner cabinet systems.Quaturis S.T
Page 755 and 756:
Corner cabinet systems.Quaturis 75.
Page 757 and 758:
Page 759 and 760:
Page 761 and 762:
asseMBLy TeCHnoLoGy installation an
Page 763 and 764:
Page 765 and 766:
APPLicAtionS one machine for 10 app
Page 767 and 768:
AcceSSorieS 1 Included in the stand
Page 769 and 770:
Page 771 and 772:
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
APPLicAtionS one machine for 5 appl
Page 779 and 780:
1 Other types on request 2 Included
Page 781 and 782:
Page 783 and 784:
1 Included in the standard specific
Page 785 and 786:
Page 787 and 788:
1 Included in the standard specific
Page 789 and 790:
technicAL dAtA Connections pneumati
Page 791 and 792:
Page 793 and 794:
Page 795 and 796:
Page 797 and 798:
Assembly technology.Assembly aids..
Page 799 and 800:
Page 801 and 802:
Page 803 and 804:
Page 805 and 806:
Page 807 and 808:
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
Page 817 and 818:
F Item No. Old Item No. PU Page f01
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Page 825 and 826:
Page 827 and 828:
Page 829 and 830:
Page 831 and 832:
Item No. Index Old Item No. / F Ite
Page 833 and 834:
Old Item No. F Item No. PU Page 315
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
Page 841 and 842:
05-2011 item no. indeX old item no.
Page 843 and 844:
05-2011 Packaging units are not cov
Page 845:
GRASS GmbH Movement Systems Grass P
show all

Grass Katalog EN 2012

Create successful ePaper yourself

Delete template?

Save as template?