Grass Katalog EN 2012

More documents

Recommendations

Info

1 2 3 4 5 6 7 8 SinGLe-joint hinGeS technical information Single-joint hinges. .Technical information.. nUmBer of hinGeS Number of hinges Applies to 19 mm thick chipboard. Doors must not be greater in width than in height. moUntinG/diSmoUntinG Mounting Dismounting simply press in - cabinet and door are now firmly attached to each other. Arm fiXinG Screws for arm fixing 2 euro collar screws (6.3 x 10.5 mm or 6.3 x 13.5 mm) 1 chipboard screw 3.5 x 13 mm, pozidriv size 2 this screw must be fitted for safety reasons. bis 2400 mm bis 2000 mm 376 <strong>Grass</strong> the cAtAlogue Packaging units are not covered in this catalogue; please enquire with your supplier 05-2011 bis 900 mm 8 kg the hinge connection can be released with a twist of a flat-blade screw driver. this means that unintentional dismounting is not possible. 17 kg 600 mm 20 kg 2 3 4
Hinge systems.Single-joint hinges. .Technical information. AdjUStmentS Side adjustment MB-6010, MB-8010 Height adjustment MB-6010, MB-8010 With this screw, the reveal can be directly adjusted. Adjustment range -2 mm. 05-2011 Adjustment via slots by breaking out the two pins below the euro screws. Adjustment range +/-2 mm. Following adjustment, set 3rd screw. Side adjustment MB-8320 Direct height adjustment MB-8320 With this screw, the reveal can be directly adjusted. Adjustment range -2 mm. Adjustment via screw. Adjustment range +/-2 mm. release 3rd screw before adjustment; re-tighten following the adjustment. hinGe SyStemS SinGLe-joint hinGeS technicAL informAtion All dimensions in millimetres. Subject to changes the cAtAlogue <strong>Grass</strong> 377 1 2 3 4 5 6 7 8
Page 1 and 2:
MOVEMENT SYSTEMS THE CATALOGUE 2011
Page 3 and 4:
MoveMent SySteMS tHe cAtAloGue 2011
Page 5 and 6:
GrASS WorlDWiDe A globally successf
Page 7 and 8:
GrASS movement sYstems A piece of f
Page 9 and 10:
movement is green. colour has an im
Page 11 and 12:
KinVAro FlAp sYstems whether high-g
Page 13 and 14:
KinVAro FlAp sYstems Whichever flap
Page 15 and 16:
tiomoS hinge sYstem with tiomos a v
Page 17 and 18:
You can tell the quality of a hinge
Page 19 and 20:
dynAPro sliDe sYstem high load capa
Page 21 and 22:
dynAPro sliDe sYstem Whether you ar
Page 23 and 24:
noVA Pro DrAWer sYstem nova Pro - t
Page 25 and 26:
Furniture that meets exclusive tast
Page 27 and 28:
dwd XP DrAWer sYstem DWD Xp means t
Page 29 and 30:
the extraordinary running performan
Page 31 and 32:
tiPmAtic opening sYstem mechanical
Page 33 and 34:
SenSotronic sliDe sYstem Fully elec
Page 35 and 36:
QUAtUriS corner cABinet sYstems 31
Page 37 and 38:
making optimum use of storage space
Page 39 and 40:
Whether you want to drill a row of
Page 41 and 42:
it goes without saying that plannin
Page 43 and 44:
the development of complex movement
Page 45 and 46:
From 3D instruments for measuring p
Page 47 and 48:
enVironmentAL protection Since the
Page 49 and 50:
Kinvaro FlAp sYstems exclusive flap
Page 51 and 52:
05-2011 View Product description Il
Page 53 and 54:
05-2011 max. 120° max. 170 123 min
Page 55 and 56:
Flap systems.Kinvaro.L-80 parallel
Page 57 and 58:
Flap systems.Kinvaro.S-35 up-and-ov
Page 59 and 60:
Flap systems.Kinvaro.T-65 lift-up f
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Flap systems.Kinvaro.T-105 flap sta
Page 73 and 74:
Flap systems.Kinvaro.F-20 Adjustmen
Page 75 and 76:
Kinvaro. .S-35 adjustment options.
Page 77 and 78:
Kinvaro. .T-70 adjustment options.
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Flap systems.Kinvaro.T-105 adjustme
Page 85 and 86:
HinGe sYstems grAss hinge systems o
Page 87 and 88:
TioMos hinge sYstems tiomos - curre
Page 89 and 90:
Opening angle 120° 120° 120° 05-
Page 91 and 92:
05-2011 hinGe SyStemS tiomoS 110 11
Page 93 and 94:
order informAtion for driLLinG PAtt
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
driLLinG PAtternS 45/9.5 Screw fixi
Page 105 and 106:
Page 107 and 108:
05-2011 hinGe SyStemS tiomoS 110 AL
Page 109 and 110:
05-2011 Hinge systems tiomos 110/90
Page 111 and 112:
Page 113 and 114:
05-2011 hinGe SyStemS tiomoS 110/30
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Hinge systems.Tiomos 110/37E.+37°
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
05-2011 hinGe SyStemS tiomoS 120/-1
Page 139 and 140:
Page 141 and 142:
05-2011 hinGe SyStemS tiomoS 120/-3
Page 143 and 144:
Page 145 and 146:
Hinge systems.Tiomos 120/-45A.-45°
Page 147 and 148:
Page 149 and 150:
Hinge systems.Tiomos.Mounting plate
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
05-2011 hinGe SyStemS tiomoS AcceSS
Page 157 and 158:
Hinge systems.Tiomos. .Technical in
Page 159 and 160:
oPtionS for chAnGinG the door oVerL
Page 161 and 162:
05-2011 hinGe SyStemS tiomoS techni
Page 163 and 164:
neXis hinge sYstems the versatile n
Page 165 and 166:
neXis impresso Fast, tool-free inst
Page 167 and 168:
Opening angle 95° 05-2011 View Pro
Page 169 and 170:
Hinge systems.Nexis Impresso 04.100
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Hinge systems.Nexis Impresso 05/20/
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Hinge systems.Nexis Impresso 29/-14
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Hinge systems.Nexis Impresso.Mounti
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Hinge systems. Nexis Impresso.Acces
Page 205 and 206:
Hinge systems.Nexis Impresso. .Tech
Page 207 and 208:
teSt criteriA for hinGeS Functional
Page 209 and 210:
neXis clicK-on Quick-fit hinges for
Page 211 and 212:
Opening angle 125° 125° 125° 95
Page 213 and 214:
05-2011 hinGe SyStemS neXiS cLicK-o
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Hinge systems.Nexis Click-on.Mounti
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Hinge systems.Nexis Click-on.access
Page 269 and 270:
Hinge systems.Nexis Click-on. .Tech
Page 271 and 272:
Page 273 and 274:
neXis sliDe-on hinges for numerous
Page 275 and 276:
Opening angle 270° 180° - 95° 95
Page 277 and 278:
Hinge systems.Nexis Slide-on 04.100
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Hinge systems.Nexis Slide-on 05/30/
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Hinge systems.Nexis Slide-on PCC.Pi
Page 307 and 308:
Page 309 and 310:
Hinge systems.Nexis Slide-on 17 AL.
Page 311 and 312:
Hinge systems.Nexis Slide-on 17 GL.
Page 313 and 314:
Hinge systems.Nexis Slide-on.Mounti
Page 315 and 316:
Hinge systems.Nexis Slide-on.Mounti
Page 317 and 318:
Hinge systems.Nexis Slide-on.Access
Page 319 and 320:
Hinge systems.Nexis Slide-on. .Tech
Page 321 and 322:
Page 323 and 324:
sofT-CLose For neXis Damping system
Page 325 and 326:
Hinge systems.Soft-close. Impresso.
Page 327 and 328:
Hinge systems.Soft-close.Click-on.F
Page 329 and 330: Hinge systems.170° Soft-close..For
Page 331 and 332: Hinge systemsSoft-close.Mirro.For N
Page 333 and 334: Hinge systems.Soft-close.ACC.For wo
Page 335 and 336: Hinge systems.Soft-close.AL.For alu
Page 337 and 338: Hinge systems.Soft-close Pin.Pneuma
Page 339 and 340: TiPMaTiC For neXis the mechanical o
Page 341 and 342: Hinge systems.Tipmatic Plus.Impress
Page 343 and 344: 05-2011 hinGe SyStemS tiPmAtic PLUS
Page 345 and 346: Hinge systems.170° Tipmatic Plus..
Page 347 and 348: Hinge systems.Tipmatic Plus.Mirro.F
Page 349 and 350: 05-2011 hinGe SyStemS tiPmAtic for
Page 351 and 352: 05-2011 hinGe SyStemS tiPmAtic for
Page 353 and 354: 05-2011 hinGe SyStemS tiomoS ASSemB
Page 355 and 356: sPeCiaL HINGES hinges for special a
Page 357 and 358: Hinge systems.Special hinges.90° f
Page 359 and 360: Hinge systems.Special hinges.Mini-h
Page 361 and 362: Hinge systems.Special hinges.Glass
Page 363 and 364: Hinge systems.Special hinges.180°
Page 365 and 366: Hinge systems.Special hinges.Glass
Page 367 and 368: sinGLe-joinT hinges single-joint hi
Page 369 and 370: Hinge systems.Single-joint hinges.S
Page 379: 05-2011 hinGe SyStemS SinGLe-joint
Page 383 and 384: CaBineT MaKinG Accessories small co
Page 385 and 386: Hinge systems.Cabinet making access
Page 387 and 388: 05-2011 hinGe SyStemS cABinet mAKin
Page 389 and 390: 05-2011 hinGe SyStemS cABinet mAKin
Page 401 and 402: . . . 05-2011 All dimensions in mil
Page 403 and 404: Drawer sYstems versatile comprehens
Page 405 and 406: nova Pro DrAWer sYstems the complet
Page 407 and 408: nova Pro DeluXe the elegant, compre
Page 409 and 410: 05-2011 View Product description De
Page 411 and 412: 05-2011 drAwer SyStemS noVA Pro cry
Page 421 and 422: 05-2011 drAwer SyStemS noVA Pro deL
Page 431 and 432:
05-2011 drAwer SyStemS noVA Pro deL
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Drawer systems.Nova Pro.Steel back
Page 441 and 442:
05-2011 drAwer SyStemS noVA Pro fUL
Page 443 and 444:
05-2011 drAwer SyStemS noVA Pro tiP
Page 445 and 446:
Drawer systems.Nova Pro Deluxe..Tec
Page 447 and 448:
nova Pro clAssic the classic, compr
Page 449 and 450:
05-2011 View Product description De
Page 451 and 452:
05-2011 drAwer SyStemS noVA Pro cry
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
05-2011 drAwer SyStemS noVA Pro cLA
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
05-2011 drAwer SyStemS noVA Pro Ste
Page 481 and 482:
05-2011 drAwer SyStemS noVA Pro fUL
Page 483 and 484:
05-2011 drAwer SyStemS noVA Pro tiP
Page 485 and 486:
AiLinG fASteninG with tiLt AnGLe Ad
Page 487 and 488:
nova Pro orgAnising AnD DiviDing sY
Page 489 and 490:
05-2011 drAwer SyStemS noVA Pro diV
Page 491 and 492:
order informAtion for BottLe hoLder
Page 493 and 494:
05-2011 drAwer SyStemS noVA Pro orG
Page 495 and 496:
eXtension moDule h65 For DrAWer siD
Page 497 and 498:
order informAtion BAse moDule vArio
Page 499 and 500:
APPLicAtion eXAmPLeS Example 2 outs
Page 501 and 502:
For DrAWers 6 Spice rack insert (wi
Page 503 and 504:
Drawer systems.Nova Pro organising
Page 505 and 506:
Drawer systems.Nova Pro..Accessorie
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
inStALLAtion informAtion installati
Page 513 and 514:
inStALLAtion informAtion 05-2011 dr
Page 515 and 516:
nova Pro sensoMaTiC electro-mechani
Page 517 and 518:
05-2011 View Product description Pa
Page 519 and 520:
Drawer systems.Nova Pro Sensomatic.
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
inStALLAtion informAtion 05-2011 dr
Page 533 and 534:
Drawer systems.Nova Pro Sensomatic.
Page 535 and 536:
AdjUStment variable drive force not
Page 537 and 538:
DwD XP DrAWer sYstem the versatile,
Page 539 and 540:
DwD XP DrAWer sYstem elegantly desi
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
05-2011 drAwer SyStemS dwd XP drAwe
Page 547 and 548:
05-2011 drAwer SyStemS dwd XP inSet
Page 549 and 550:
05-2011 drAwer SyStemS dwd XP Pot d
Page 551 and 552:
05-2011 drAwer SyStemS dwd XP inSer
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
05-2011 drAwer SyStemS dwd XP inSet
Page 559 and 560:
05-2011 drAwer SyStemS dwd XP Add-o
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Drawer systems.DWD XP.Steel back pa
Page 585 and 586:
05-2011 drAwer SyStemS dwd XP fULL
Page 587 and 588:
05-2011 drAwer SyStemS dwd XP tiPmA
Page 589 and 590:
Drawer systems.DWD XP. .Technical i
Page 591 and 592:
Drawer systems.DWD XP. .Technical i
Page 593 and 594:
dwd XP DiviDing AnD orgAnising sYst
Page 595 and 596:
05-2011 drAwer SyStemS dwd XP diVid
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
05-2011 drAwer SyStemS dwd XP orGAn
Page 607 and 608:
Drawer systems.DWD XP.Organising sy
Page 609 and 610:
Drawer systems.DWD XP.Accessories.
Page 611 and 612:
05-2011 drAwer SyStemS APPLicAtion
Page 613 and 614:
Drawer systems.Application examples
Page 615 and 616:
Drawer systems.Application examples
Page 617 and 618:
DwD XP sensoMaTiC electro-mechanica
Page 619 and 620:
Page 621 and 622:
Drawer systems.DWD XP Sensomatic.Si
Page 623 and 624:
Drawer systems.DWD XP Sensomatic.St
Page 625 and 626:
Drawer systems.DWD XP Sensomatic.St
Page 627 and 628:
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Drawer systems.DWD XP Sensomatic.In
Page 637 and 638:
Drawer systems.DWD XP Sensomatic.Di
Page 639 and 640:
sLiDe sYstems concealed slide syste
Page 641 and 642:
DynaPro sliDe sYstem A new slide ge
Page 643 and 644:
05-2011 SLide SyStemS dynAPro fULL
Page 645 and 646:
05-2011 SLide SyStemS dynAPro fULL
Page 647 and 648:
05-2011 SLide SyStemS dynAPro rAiLi
Page 649 and 650:
05-2011 SLide SyStemS dynAPro PULL-
Page 651 and 652:
05-2011 SLide SyStemS dynAPro ino(X
Page 653 and 654:
AdjUStment 05-2011 SLide SyStemS dy
Page 655 and 656:
DynaMoov sliDe sYstem the super-eff
Page 657 and 658:
05-2011 SLide SyStemS dynAmooV fULL
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
05-2011 SLide SyStemS dynAmooV rAiL
Page 665 and 666:
05-2011 SLide SyStemS dynAmooV PULL
Page 667 and 668:
05-2011 SLide SyStemS dynAmooV ino(
Page 669 and 670:
05-2011 SLide SyStemS technicAL inf
Page 671 and 672:
DynaMiC nT sliDe sYstem concealed s
Page 673 and 674:
05-2011 SLide SyStemS dynAmic nt Si
Page 675 and 676:
05-2011 SLide SyStemS dynAmic nt Si
Page 677 and 678:
05-2011 SLide SyStemS dynAmic nt rA
Page 679 and 680:
05-2011 SLide SyStemS dynAmic nt in
Page 681 and 682:
05-2011 SLide SyStemS dynAmic nt te
Page 683 and 684:
DynaPro sensoMaTiC electro-mechanic
Page 685 and 686:
Page 687 and 688:
Slide systems.Dynapro Sensomatic.Si
Page 689 and 690:
Slide systems.Dynapro Sensomatic.St
Page 691 and 692:
Slide systems.Dynapro Sensomatic.St
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
05-2011 SLide SyStemS dynAPro SenSo
Page 701 and 702:
Slide systems.Dynapro Sensomatic.In
Page 703 and 704:
Slide systems.Dynapro Sensomatic.Di
Page 705 and 706:
oLLer sYstems the classic range for
Page 707 and 708:
inTeGra ToP the single-wall drawer
Page 709 and 710:
Page 711 and 712:
05-2011 roLLer SyStemS inteGrA toP
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
Page 731 and 732:
Page 733 and 734:
order informAtion for drAwer diVide
Page 735 and 736:
Roller systems.Integra Top.Accessor
Page 737 and 738:
Roller systems.Integra Top.Technica
Page 739 and 740:
oLLer sLiDes sturdy single and full
Page 741 and 742:
05-2011 roLLer SyStemS roLLer SLide
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
AdjUStmentS Inserting the centre ra
Page 749 and 750:
Corner CaBineT sYstems intelligent
Page 751 and 752:
Corner cabinet systems.Quaturis S.C
Page 753 and 754:
Corner cabinet systems.Quaturis S.T
Page 755 and 756:
Corner cabinet systems.Quaturis 75.
Page 757 and 758:
Page 759 and 760:
Page 761 and 762:
asseMBLy TeCHnoLoGy installation an
Page 763 and 764:
Page 765 and 766:
APPLicAtionS one machine for 10 app
Page 767 and 768:
AcceSSorieS 1 Included in the stand
Page 769 and 770:
Page 771 and 772:
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
APPLicAtionS one machine for 5 appl
Page 779 and 780:
1 Other types on request 2 Included
Page 781 and 782:
Page 783 and 784:
1 Included in the standard specific
Page 785 and 786:
Page 787 and 788:
1 Included in the standard specific
Page 789 and 790:
technicAL dAtA Connections pneumati
Page 791 and 792:
Page 793 and 794:
Page 795 and 796:
Page 797 and 798:
Assembly technology.Assembly aids..
Page 799 and 800:
Page 801 and 802:
Page 803 and 804:
Page 805 and 806:
Page 807 and 808:
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
Page 817 and 818:
F Item No. Old Item No. PU Page f01
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Page 825 and 826:
Page 827 and 828:
Page 829 and 830:
Page 831 and 832:
Item No. Index Old Item No. / F Ite
Page 833 and 834:
Old Item No. F Item No. PU Page 315
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
Page 841 and 842:
05-2011 item no. indeX old item no.
Page 843 and 844:
05-2011 Packaging units are not cov
Page 845:
GRASS GmbH Movement Systems Grass P
show all

Grass Katalog EN 2012

Create successful ePaper yourself

Delete template?

Save as template?