Grass Katalog EN 2012

Hinge systems.Tipmatic Plus.Impresso.For Nexis Impresso hinges without self-closing mechanism.
inStALLAtion informAtion All dimensions in millimetres
05-2011
hinGe SyStemS
tiPmAtic PLUS imPreSSo
for neXiS imPreSSo hinGeS withoUt SeLf-cLoSinG mechAniSm
Dimensions position for tipmatic plus impresso
≤ 900 mm
All dimensions in millimetres. Subject to changes the cAtAlogue Grass 337
4–5 kg
* *
recommended position for tipmatic plus impresso.
position for counter plate (at level of the magnetic pin). one magnetic pin per door.
*
recommended position for tipmatic plus impresso for applications in wall cabinets.
*
position for counter plate (at level of the magnetic pin) in wall cabinets.
one magnetic pin per door.
position for frame adapter plate position for linear adapter plate
4
3.5 x 15
32
9.5
13
4
≤ 1600 mm
6–9 kg
≤ 2200 mm
10–15 kg
3.5 x 1517
≤ 2500 mm
600 mm
16–22 kg
7
9
Do not use door buffers! Counter plate, self-adhesive or for screw fixing Do not use door buffers! Counter plate, self-adhesive or for screw fixing
installation tipmatic plus impresso – quick and easy to fit
1 2
1 remove door from the cabinet, take off hinge arm cover
cap (if fitted) and open the hinge cup cover.
2 place tipmatic plus impresso adapter level onto both matching
parts in the hinge cup, ensure proper fit and press down firmly.
3 close hinge cup cover and press down fully. Adapter must make
full contact with the door.
4 Fully insert tipmatic plus ejector into the adapter opening, with
the flat side facing downwards.
3 4
5 clip the door back on to the mounting plates, adjust the front
gap, replace hinge arm cover cap (if available).
5
noteS
B
tipmatic Plus impresso is only suitable for hinges without
self-closing mechanism.
For framed doors we recommend tipmatic plus click-on.
Before attaching the self-adhesive plate, ensure that the surface
is clean and free from grease.
grass does not give any warranty if tipmatic plus is used with a
different hold-closed system. When fitting grass furniture hardware,
the installation instructions supplied with the applicable
sales literature must be observed in detail, otherwise the company
cannot accept liability. if you require further information relating
to installation and assembly, please contact one of our factories
directly. We thank you for your understanding.
32
16
B
1
2
3
4
5
6
7
8