Grass Katalog EN 2012

Hinge systems.Nexis Slide-on. .Technical information.
AdjUStmentS
05-2011
hinGe SyStemS
neXiS SLide-on
technicAL informAtion
Description Side adjustment +1/-3 mm Depth adjustment +3/-1 mm Height adjustment +/- 2mm
the height adjustment option depends
on the type of mounting plate.
All adjustments can be carried out
independently of each other.
minimUm GAP – cUP diStAnce
Description Example:
the minimum gap (mS) is the
clearance required between the
closed door and the front edge of the
cabinet so that the door can open
without hindrance.
the cup distance (tA) is the distance
between the edge of the door
and the edge of the cup hole.
door ProtrUSion/door oVerLAy
Door protrusion Door overlay
door protrusion (teS) occurs
when the door is opened and varies
depending on the type of hinge and
method of application.
it is shown on each catalogue page
and refers to the factory setting with
the respective mounting plate shown.
it can be altered by using a different
mounting plate height and by changing
the side adjustment.
TES
A
TA
MS
For a door thickness of 26 mm
and a cup distance of 6 mm, the
minimum gap is 0.7 mm.
the door overlay (A) is that part of
the side wall or frame which is covered
by the door.
example:
With a hinge with cranking
size 8, a mounting plate height of
0 and a cup distance of 5 mm, the
door overlay is 10 mm.
All dimensions in millimetres. Subject to changes the cAtAlogue Grass 315
Door thickness
Door overlay
Cup distance
3 4 5 6
16 0.5 0.5 0.5 0.5
18 0.5 0.5 0.5 0.5
19 0.5 0.5 0.5 0.5
20 0.0 0.0 0.0 0.5
22 0.5 0.5 0.5 0.5
24 0.5 0.5 0.5 0.5
26 0.5 0.5 0.5 0.7
28 0.5 0.5 0.5 0.9
30 0.5 0.5 1.1 1.1
Minimum gap
8
Cup distance
3 4 5 6
11 0
10 0
9 0 2
8 0 2 3
7 2 3 4
6 2 3 4
5 3 4
4 4
Mounting plate height
1
2
3
4
5
6
7
8