Grass Katalog EN 2012

05-2011
hinGe SyStemS
neXiS cLicK-on 07 mirro
128° mirror And GLASS door hinGe
Hinge systems.Nexis Click-on 07 Mirro.128° mirror and glass door hinge
inStALLAtion informAtion All dimensions in millimetres
Full overlay half overlay inset
55
55
b = 3-8
max. 21
A
z
X
min. 2
73-75
b = 3-8
A
z
X
min. 2
All dimensions in millimetres. Subject to changes the cAtAlogue Grass 251
73-75
mounting plate height 2 mounting plate height 2 mounting plate height 2
croSS moUntinG PLAte LineAr moUntinG PLAte StAinLeSS SteeL AdAPter
Hole spacing
Mounting plate height
0 2 4
28 37 37 37
37 46-48 46-48 46-48
X Mounting plate position
nUmBer of hinGeS
2450 mm
2200 mm
1600 mm
900 mm
SA
4–6 kg
7–12 kg
13–17 kg
500 mm
18–22 kg
2 3 4 5
Hole spacing
Mounting plate height
0 2 4
13.5 22.5 22.5 22.5
22 31 31 31
X Mounting plate position
noteS
the door overlay (A) on the cabinet side
depends on the distance at which the
hinge seat (z) is glued and the mounting
plate height. When using a 0 mounting
plate height and making full use of the
adjustment, the maximum overlay
is 16 mm.
inset application can be achieved by
changing the fixing distance of the mounting
plate (X) and reducing the gluing
distance.
i important: With mirror and glass
doors a minimum reveal width of 2
mm is required (risk of breakage).
the inside edge of the door must not
touch the cabinet during opening.
b = 3-8
55
Mounting plate height
0 2 4
z A+7 A+9 A+11
z = gluing position
z
X + b + 2.5
min. 2
i installation advice: please contact
your glass or door supplier regarding
selection and application of the adhesive
for fixing the hinge seat to mirror
or glass doors.
i Liability claims: please note that
grass cannot accept any liability for
the adhesive and gluing process used
or for any resulting claims.
i important: mirro hinges must not be
used with cam mounting plates.
1
2
3
4
5
6
7
8