Grass Katalog EN 2012

1
2
3
4
5
6
7
8
neXiS imPreSSo
technical information
oPtionS for chAnGinG the door oVerLAy
By selecting the cranking By using a mounting plate with a different height
Full overlay (cranking 0) Full overlay
the door overlay (A) is
the cup overlay (tAS/factory
setting) plus the cup
distance (tA).
the dimensions are shown
in a table on the respective
catalogue page.
half overlay (cranking 8) half overlay
the door overlay (A) is
the cup overlay (tAS/factory
setting) plus the cup
distance (tA).
the dimensions are shown
in a table on the respective
catalogue page.
TAS
TAS
F
TA
A
MS
2 x F
TA
A
MS
hinge with cranking size 0
and mounting plate height 0
hinge with cranking size 0
and mounting plate height 8
inset (cranking 15) inset
there is no door overlay.
hinge with cranking size 0
and mounting plate height 18
the reveal (f) between the
cabinet side wall and the door
depends on the mounting
plate height (mh) and the
cup distance (tA).
the dimensions are shown in
a table on the respective
catalogue page. F
TA
TES
202 Grass the cAtAlogue Packaging units are not covered in this catalogue; please enquire with your supplier 05-2011