Grass Katalog EN 2012

1
2
3
4
5
6
7
8
tiomoS
technical information
minimUm GAP
Description Example:
the minimum gap is the
clearance required between
the front edge of the cabinet
and the closed door so that
the door can open without
hindrance.
the factory setting of the gap
is 1.5 mm.
the cup distance (tA) is the
distance between the edge of
the door and the edge of the
cup hole.
door oVerLAy
Description Example:
the door overlay (A) is that
part of the side wall or frame
which is covered by the door.
door ProtrUSion
Description
door protrusion (teS)
occurs when the door is
opened and varies depending
on the type of hinge and
application.
it is shown on each catalogue
page and refers to the factory
setting with the respective
mounting plate shown. it can
be altered by using a different
mounting plate height and by
changing the side adjustment.
TES
TA
A
1.5 mm
For a 17 mm thick door and a cup
distance of 6 mm, the minimum gap
is 1.0 mm.
For a hinge with cranking 3, a
mounting plate height 2 and a cup
distance of 4 mm, the door overlay
is 14 mm.
154 Grass the cAtAlogue Packaging units are not covered in this catalogue; please enquire with your supplier 05-2011
Door thickness
Door overlay
Cup distance
3 4 5 6 7
24 1.0 1.0 1.0 1.2 2.1
22 1.0 1.0 1.0 1.0 1.5
21 1.0 1.0 1.0 1.0 1.2
20 1.0 1.0 1.0 1.0 1.0
19 1.0 1.0 1.0 1.0 1.0
18 1.0 1.0 1.0 1.0 1.0
17 1.0 1.0 1.0 1.0 1.0
16 1.0 1.0 1.0 1.0 1.0
Minimum gap
Cup distance
3 4 5 6 7
19.0 0
18.0 0
17.0 0 2
16.5
16.0 0 2 3
15.5 3.5
15.0 0 2 3
14.5 3.5
14.0 2 3
13.5 3.5
13.0 2 3
12.5 3.5
12.0 3
11.5 3.5
Mounting plate height