ANALYSETTE 22 NanoTec

Small volume wet dispersion unit
and wet dispersion unit in the front
SMALL VOLUME WET DISPERSION UNIT
YOUR ADVANTAGES
• Especially practical transparent glass container for checking the sample
• Manually controlled centrifugal pump for gentle transport of the sample
• The measurement circuit is without dead space and can be easily rinsed with a single-lever valve (4/2-way ball valve)
• All parts coming into contact with the liquid are made of steel, PTFE, glass, FFPM (Kalrez ® ) or Norprene ®
If an organic solvent must be used for a specifi c sample material or if only minimal sample quantities are available, the use
of a solvent-compatible dispersion unit with low volume can be advantageous. For this purpose, FRITSCH offers the small
volume wet dispersion unit with roughly 100 ml total volume as the ideal supplement for measurements in solvents up to
a particle size of about 600 µm. With intuitive manual operation guided by the software of the ANALYSETTE 22 – for fast,
easy operation.
15