IBM IntelliStation - ps-2

30
Bay
Form
Factor
Height
Total
EIDE Models
Internal
Storage 1
7200RPM EIDE HDDs2 40GB
(22P7157)
60GB
(09N4207)
80GB
(09N4226)
120GB
(09N4231)
40GB Standard on EIDE models
80GB 1 - - -
100GB - 1 - -
120GB 2 - - -
140GB 1 1 - -
160GB - 2 - -
180GB 3
- 3 - -
200GB - - 2 -
240GB 3
- - 3 -
280GB 3
- - 2 1
320GB 3
- - 1 2
360GB 3
- - - 3
This table does not represent all possible HDD configurations.Total Internal Storage listed is within
+/-0.2GB unless otherwise noted.
1. Select a total storage row then add the quantity of HDDs from all columns to the standard HDD.
2. Supports a maximum of four IDE devices including CD-ROM drives, HDDs and IDE tape drives.
3. Requires replacing the standard HDD.
Front
Access Usage
Part
Number
Description RPM Height
Bays
Supported
1 133mm (5.25in) HH yes CD-ROM 1 IDE HDDs1, 2
2 133mm (5.25in) HH yes open 1
22P7157 40GB 7200rpm ATA-100 (EIDE) HDD 7200 SL 3 ... 7 3
3 89mm (3.5in) SL yes FDD 09N4207 60GB 7200rpm ATA-100 (EIDE) HDD 7200 SL 3 ... 7 3
4 89mm (3.5in) SL yes open 2
09N4226 80GB 7200rpm ATA-100 (EIDE) HDD 7200 SL 3 ... 7 3
5, 6 89mm (3.5in) SL no open 3
09N4231 120GB 7200rpm ATA-100 (EIDE) HDD 7200 SL 3 ... 7 3
7 89mm (3.5in) SL no Std HDD
Nonhot-swap Ultra160 SCSI
2, 4
HDDs
1. Supports removable media devices only. Hard disk drives are not
supported.
2. Supports a third IDE HDD in IDE models or a fourth SCSI HDD in
SCSI models.
3. Bay five supports a third SCSI HDD in SCSI models, but the third
IDE HDD IDE models should be installed in bay four
06P5750 18.2GB 10Krpm Ultra160 SCSI SL HDD 10000 SL 3 ... 7 4
. 06P5751 36.4GB 10Krpm Ultra160 SCSI SL HDD 10000 SL 3 ... 7 4
06P5752 73.4GB 10Krpm Ultra160 SCSI SL HDD 10000 SL 3 ... 7 4
06P5765 18.2GB 15Krpm Ultra160 SCSI SL HDD 15000 SL 3 ... 7 4
06P5766 36.4GB 15Krpm Ultra160 SCSI SL HDD
Nonhot-swap Ultra320
2, 4, 5
HDDs
15000 SL 3 ... 7 4
32P0723 36.4GB 10Krpm Ultra320 SCSI HDD 10000 SL 3 ... 7 4
32P0724 73.4GB 10Krpm Ultra320 SCSI HDD 10000 SL 3 ... 7 4
32P0725 146.8GB 10Krpm Ultra320 SCSI HDD 10000 SL 3 ... 7 4
Removable Media Devices
Bays
Supported
10K3782 48X-20X IDE CD-ROM 6
1, 2
22P6950 16X Max RAM-Read DVD-ROM Drive
6, 7
1, 2
00N8078 250MB IDE Internal Zip Drive 1, 2, 4
1. IDE models support a maximum of four IDE devices including CD-ROM drives, IDE hard disk drives and IDE tape
drives.
2. Standard HDD installed in bay seven for both SCSI and IDE models.
3. Maximum quantity of IDE HDDs requires installing the third IDE HDD in bay four on the same bus as the optical
drive in bay one.
4. SCSI models support a maximum of four SCSI HDDs installed in the following order: bay seven, six, five, four.
5. Ultra320 HDDs are supported, but performance is limited to the Ultra160 speed of the SCSI controller.
6. Either replace the standard CD-ROM or install in the available media bay. An IDE cable with three connectors is
included with the optional optical drive. The included audio cable must be connected in order to support audio for
music CDs but not for DVD-ROM.
7. DVD video playback is not supported for models that include a 3Dlabs Wildcat III 6110 video adapter.
Max
Qty 3