26.10.2014 Views

Apogee DA Amps Spec Sheet: DA-600, DA-700, DA-800 - HAAN-PA

Apogee DA Amps Spec Sheet: DA-600, DA-700, DA-800 - HAAN-PA

Apogee DA Amps Spec Sheet: DA-600, DA-700, DA-800 - HAAN-PA

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Available Models:<br />

<strong>DA</strong>-<strong>600</strong>, <strong>DA</strong>-<strong>700</strong>, & <strong>DA</strong>-<strong>800</strong><br />

<strong>DA</strong>-Series<br />

Digital<br />

Amplifiers<br />

Description:<br />

The <strong>DA</strong>-Series is distinguished from conventional<br />

amplifiers by its intelligent computer control. The <strong>DA</strong><br />

amplifiers employ shaft-encoder controls and LCD<br />

displays. They offer superb thermal stability, ultra-low<br />

distortion, and unprecedented reliability. <strong>DA</strong> amplifiers<br />

utilize an industry-first electronic circuit breaker which<br />

may be remotely reset through network control.<br />

All three models are based on third generation bipolar<br />

transistor technology for the utmost in confidence<br />

and freedom from long-term degradation of sound<br />

quality.<br />

The <strong>DA</strong>-Series offers many additional practical<br />

features, such as a front panel, removable air filter for<br />

ease in cleaning and adjustable rear rack ears. <strong>DA</strong><br />

amplifiers are also available with built-in loudspeaker<br />

processors for single-amped, bi-amped, and subwoofer<br />

loudspeaker models.<br />

An on-board microprocessor continually monitors<br />

all critical internal functions and sends status reports to<br />

the front panel information display. The vital<br />

information that the computer provides, such as driver<br />

impedance and line voltage, can greatly aid the<br />

professional in quickly troubleshooting or verifying<br />

proper system performance.<br />

Quick Data:<br />

AMPLIFIER<br />

QUICK<br />

CHART<br />

<strong>DA</strong>-<strong>800</strong><br />

<strong>DA</strong>-<strong>700</strong><br />

<strong>DA</strong>-<strong>600</strong><br />

660<br />

545<br />

500<br />

Highlights:<br />

ohms<br />

Power Output<br />

8 4 2 8 4<br />

Bridged Mono<br />

975 910 1880 1820


<strong>DA</strong>-<strong>800</strong> Front View<br />

<strong>DA</strong>-<strong>800</strong> Rear View<br />

Technical <strong>Spec</strong>ifications:<br />

FREQUENCY RESPONSE:<br />

20 Hz to 20 kHz, +0, -0.3dB, at all power levels<br />

THD: < 0.007% (4 ohms, 1 kHz, 400W)<br />

SMPTE INTERMODULATION DISTORTION (IMD):<br />

< 0.01%, 60 Hz & 7 kHz, rated power @ 8 ohms<br />

SLEW RATE: 35V/microsecond, input filter bypassed<br />

<strong>DA</strong>MPING FACTOR: 400:1, 1 kHz @ 8 ohms<br />

INPUT COMMON MODE REJECTION (CMR):<br />

Greater than 90 dB<br />

VOLTAGE GAIN: 40x 32 dB<br />

INPUT SENSITIVITY: For rated power @ 4 ohms;<br />

<strong>DA</strong>-<strong>800</strong>: 1.53V, <strong>DA</strong>-<strong>700</strong>: 1.36V, <strong>DA</strong>-<strong>600</strong> : 1.2V<br />

INPUT IMPE<strong>DA</strong>NCE: 13k ohms, balanced<br />

HUM and NOISE: Better than -117 dBA<br />

CROSSTALK: Better than -80 dBA<br />

CONNECTORS: Input - XLR balanced, output - 5-way binding posts<br />

COOLING: Front-to-rear tunnel, dual variable speed DC fans<br />

CONTROLS:<br />

<strong>DA</strong>-Series: two front panel detented shaft encoder Level controls,<br />

channel Link switch, level control Lock switch, Display toggle<br />

switch, Stereo/Bridge switch, Ground Lift switch<br />

CHANNEL INDICATORS:<br />

<strong>DA</strong>-Series: Large backlit liquid crystal display for each channel<br />

showing: Channel On/Off (Mute State), Phase State, Output<br />

Voltage, Output Wattage, Load Impedance, AC Mains Voltage,<br />

Temperature, and Attenuation Levels (in 0.5dB increments); each<br />

channel also has a Clip LED, Limit LED, Signal LED, Fault LED and<br />

Ready LED<br />

MASTER INDICATORS: LEDs indicating power on/off status,<br />

network control status and breaker trip warning<br />

PROTECTION: Electronic circuit breaker (may be remotely reset),<br />

high temperature, DC, turn-on delay with power ramp-up,<br />

ultrasonic, short circuit<br />

LINE VOLTAGE: 100/120/220-240 VAC internally user<br />

configurable, electronic circuit breaker<br />

CONSTRUCTION: 16-gauge welded steel chassis, 10-gauge<br />

continuous front-to-rear side rails with front and rear rack ears<br />

DIMENSIONS: 19" (483mm) W x 3.5" (89mm) H (2 EIU rack<br />

spaces) x 18.5" (470mm) D<br />

WEIGHT: 60 lbs. (27.2 kg)<br />

LIMITED WARRANTY: <strong>Apogee</strong> Sound International products, sold in the U.S.A., are<br />

warranted to be free from defects in materials and workmanship from the date of original<br />

purchase for a period of five (5) years for amplifiers and a period of one (1) year for other<br />

equipment. If a malfunction occurs, the unit will be repaired or replaced, at our option,<br />

provided it is shipped prepaid to an authorized <strong>Apogee</strong> Service Facility. This warranty<br />

does not extend to finish; appearance items; or any product malfunctions due to abuse,<br />

accident, misuse, negligence, misapplication, or improper operation. Other conditions<br />

apply. Contact <strong>Apogee</strong> for further information.<br />

2180 South McDowell Blvd.<br />

Petaluma, CA 94954 USA<br />

Tel: 707-778-8887<br />

Fax: 707-778-6923<br />

www.apogee-sound.com<br />

<strong>Spec</strong>ifications subject to change without notice. A 42-0833 / B 55-0034-01R1<br />

Printed in U.S.A.<br />

©2001 APOGEE SOUND INTL., LLC 05/01

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!