IntelliStation E Pro User Guide Professional ... - FTP Directory Listing

Setting, Changing, and Deleting an Administrator Password Protected by
Enhanced Security: To set, change, or delete an administrator password protected
by enhanced security, do the following:
1. Turn off all attached devices and the computer.
2. Refer to Chapter 7, “Installing Options Overview” on page 81 for instructions
on safety, disconnecting all cables attached to the computer, and removing the
computer cover.
3. Locate the switch marked as 7 on the rocker switches on the system board.
Refer to the system board label inside the computer for the location of the
switch. Move the switch to the ON position. (To do this, push on the ON
side.)
4. Set, change, or delete your administrator password in the Configuration/Setup
Utility program. Refer to “Setting or Changing an Administrator Password” on
page 52 or “Deleting an Administrator Password” on page 54 for instructions.
Note: You must know the administrator password to change or delete it.
5. Move the switch back to the OFF position after you have set, changed, or
deleted your password.
6. Replace the cover, and then turn on the computer.
Chapter 4. Operating Your Computer 37