33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...

H3
Factors Inhibiting
Electrical Operation
H3
Clockwise
Limit
H4
Remote Control
Inputs
H4
Remote Remote
Maintain 2 Open 1
REMOTE CLOSE 1
Bar OFF = Remote Close Signal
Present.
ESD 1
Bar OFF = ESD signal present.
H5
Remote Interlocks,
Local Control
Inputs, & T/stat
Local Stop
not
Selected
H5
Open
Interlock
69
Inhibit
Help Screen 3
CLOCKWISE LIMIT
Bar ON = Actuator has reached
clockwise limit of travel.
ANTI-CLOCKWISE LIMIT
Bar ON = Actuator has reached
Anti-clockwise limit.
INHIBIT
Bar ON = Actuator inhibited.
Possible Causes:
Phase Loss (3 phase only).
Power Loss Inhibit (page 62).
Internal Failure.
Anti
Clockwise
Limit
ESD 2
Remote
Close 1
Remote
Close 2 ESD 1
Remote Remote
Open 2 Maintain 1
Help Screen 4
All remote signals designated with ‘1’
are standard hard wired remote inputs.
When a Pakscan, Profibus or
Foundation Fieldbus card is fitted,
remote control inputs are designated
with a ‘2’.
REMOTE OPEN 1
Bar OFF = Remote Open Signal
Present.
REMOTE MAINTAIN 1
Bar OFF = Remote Maintain
signal present.
Bar ON = Remote Maintain not
present and/or Remote Stop
active.
REMOTE OPEN 2
Bar OFF = Remote Open signal
present from BUS option pcb.
REMOTE CLOSE 2
Bar OFF = Remote Close signal
present from BUS option pcb.
ESD 2
Bar OFF = ESD signal present
from BUS option pcb.
REMOTE MAINTAIN 2
Bar OFF = Remote Maintain
signal present from BUS option
pcb.
Thermostat
Tripped
Local Open
not Present
Local Close Remote
not not
Present Selected
Help Screen 5
Close
Interlock
Local not
Selected
OPEN INTERLOCK
Bar ON = Open Interlock Active.
(Actutator disabled)
Unauthorised Open electrical operation
can be prevented by interlocking the
actuator (Open) control with an
external interlock contact.
If external interlocks are not required
the interlock function must be selected
OFF.