33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...

SECONDARY FUNCTIONS CONTENTS
page
9.1 Accessing the Secondary Settings 31
9.2 Indication Contacts S1, S2, S3 and S4 32
9.3 Control Mode Configuration 34
9.4 Option Extra Indication Contacts S5–S8 37
9.5 Option CPT (Current Position Transmitter) 38
9.6 Option Folomatic Remote Control 39
9.7 Remote Control Source 42
9.8 Bus System Option Pakscan 43
9.9 Bus System Option Modbus 47
9.10 Bus System Option Profibus DP 51
9.11 Bus System Option DeviceNet 55
9.12 Bus System Positioning Control Settings 58
9.13 Option Interrupter Timer 60
9.14 Setting Tool Local Control 62
9.15 Inhibit Operation After Power Loss 62
9.16 Default Options 63
9.17 Default Options 64
10.1 Help Screens 67
10.2 IrDA Diagnostics and Configuration 72
Having established that the Primary
Functions have been correctly set, the
Secondary Functions can now be
configured to suit site control and
indication requirements.
It is possible to move through the
various Secondary Functions as shown
in Fig. 9.1 using the ❖☎and ◗ keys.
The actuator wiring diagram will
indicate any options fitted.
Options Setting Tool Local Control [Or]
and Power Loss Inhibit [OS] are
standard features, their use being
optional.
9.1
Accessing the
Secondary Functions
31
In order to display the Secondary
Functions it is necessary to press the
◗☎key until [Cr] appears.
If you have chosen to enter Secondary
Functions in the checking mode the
display will be as Fig. 9.2.
If you have chosen to enter Secondary
Functions in the setting mode the
display will be as Fig. 9.3 (refer to
Section 7).
Fig. 9.2 Fig. 9.3
PRESS THE ❖ KEY.