33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...

C2
Close Action
23
The actuator can be configured to close
on torque for seating valves and limit
for non-seating valves.
(Refer to valve manufacturer for
recommended selection).
In the absence of valvemaker
instructions refer to the following table
Using the + or - key, display the
desired option.
NOTE: When set to close on torque,
the actuator will apply the value of
torque as set for [tC] in seating the
valve (refer to [tC] page 25).
50
◗
◗
P? ❖ PC ❖ Ir ❖ Ic
◗
cr
◗
Valve type Close Open
Wedge gate “torque” “limit”
Globe “torque” “limit”
Butterfly “limit” “limit”
Thru conduit “limit” “limit”
Ball “limit” “limit”
Plug “limit” “limit”
Sluice gate “limit” “limit”
Penstock “limit” “limit”
Parallel slide “limit” “limit”
[Ct] in the Setting Field Indicating
Close on Torque - defualt setting.
c1 ❖ c2 ❖ c3
◗
[CL] in the Setting Field Indicating
Close on Limit
tC ❖ tO
◗
LC ❖ LO
◗
50
Having selected the required option
PRESS THE KEY.
The displayed option will flash,
indicating that it has been set.
PRESS THE ❖ KEY.