33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...

More documents

Recommendations

Info

Operation instructions Bevel gearboxes GK 10.2 – GK 40.2 5. Mounting multi-turn actuators SA/SAR When bevel gearboxes and multi-turn actuators are supplied together, the mounting can be done in the factory up to gearbox size GK 16.2, if desired. For sizes GK 25.2 and larger, the mounting of gearboxes is performed as follows. In case flange for actuator is not attached to gearbox: Thoroughly degrease the mounting faces of the gearbox and flange for actuator. . Fit flange for actuator and fasten with bolts and lock washers. Fasten bolts crosswise to the appropriate torque according to table 2. Figure 2: Mounting multi-turn actuators onto bevel gearboxes Bearing flange Flange for actuator GK 10.2 – GK 25.2 GK 30.2 – GK 40.2 Flange for actuator Bearing flange Mounting the multi-turn actuator: Thoroughly degrease the faces of the bearing flange at actuator and of the input flange at bevel gearbox.. Place the multi-turn actuator on bevel gearbox. The multi-turn actuator can be positioned on the valve at every 90°. Ensure that the spigot mates uniformly in the recess and that the mounting faces are in complete contact. Fasten actuator with bolts and lock washers (see table 1) at the flange of the bevel gearbox. . Fasten bolts crosswise with a torque according to table 2. Do not attach ropes or hooks for the purpose of lifting the actuator by hoist to the handwheel. If multi-turn actuator is mounted on gearbox, attach ropes or hooks for the purpose of lifting by hoist to gearbox and not to multi-turn actuator. 7
Bevel gearboxes GK 10.2 – GK 40.2 Operation instructions Table 1: Bolts for mounting AUMA multi-turn actuators on bevel gearboxes Gearbox SA(R) 07.5-F10/ G0 SA(R) 10.1-F10/ G0 SA(R) 14.1-F14/ G½ Bolt Lock washer Pcs. Bolt Lock washer Pcs. Bolt Lock washer Pcs. GK 10.2 M 10 x 25 B 10 4 M 10 x 25 B 10 4 M 16 x 40 B 16 4 GK 14.2 M 10 x 25 B 10 4 M 16 x 40 B 16 4 GK 14.6 M 10 x 25 B 10 4 M 16 x 40 B 16 4 GK 16.2 M 16 x 40 B 16 4 GK 25.2 M 16 x 40 B 16 4 Gearbox SA(R) 14.5-F14/ G½ SA(R) 16.1-F16/ G3 SA(R) 25.1-F25/ G4 Bolt Lock washer Pcs. Bolt Lock washer Pcs. Bolt Lock washer Pcs. GK 16.2 M 16 x 40 B 16 4 GK 25.2 M 16 x 40 B 16 4 GK 30.2 M 16 x 40 B 16 4 M 20 x 50 B 20 4 GK 35.2 M 16 x 40 B 16 4 M 20 x 50 B 20 4 GK 40.2 M 20 x 50 B 20 4 M 16 x 50 B 16 8 8
Page 1 and 2:
Garney Construction 785 E Warren Ga
Page 3 and 4:
SUBMITTALS https://projectdox.frees
Page 5 and 6:
Garney Construction 785 E Warren Ga
Page 7 and 8:
Page 173 Page 174 Page 179 Page 179
Page 10 and 11:
Ward County Water Supply Expansion
Page 12 and 13:
1513188 HP Page 1 of 5 401 South Hi
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 65 and 66:
AWWA Butterfly Valves 3" - 20" Engi
Page 67 and 68:
Scope of Line: AWWA In-Plant Rubber
Page 69 and 70:
Features and Benefits: of Pratt Mod
Page 71 and 72:
Dimensional Data: Model 2FII, Flang
Page 73 and 74:
401 S. Highland Avenue Aurora, Illi
Page 75 and 76:
3" through 20" Butterfly Valves Sco
Page 77 and 78:
Design Details: Models 511A and 510
Page 79 and 80:
Suggested Specification for the Hen
Page 81 and 82:
Actuator Dimensional Data for Model
Page 83 and 84:
Figure 511 24" - 72" Class 150 B Fl
Page 85 and 86:
PRATT PRODUCT GUIDE Model 2FII Mono
Page 87 and 88:
Page 89 and 90:
A Tradition of Excellence With the
Page 91 and 92:
Scope of Line: Triton XR-70 Butterf
Page 93 and 94:
Design Details: Triton XR-70 Butter
Page 95 and 96:
E-Lok Seat Design Years of Reliable
Page 97 and 98:
Water Flow Characteristics Proven P
Page 99 and 100:
Valve End Types and Dimensions: Mec
Page 101 and 102:
Actuation Traveling Nut Type Manual
Page 103:
Page 106 and 107:
SCOPE OF THE LINE: PRATT HP250II B
Page 108 and 109:
THE HENRY PRATT SEAT ON BODY DESIGN
Page 110 and 111:
HP250II 3"- 20", DUCTILE IRON BODY
Page 112 and 113:
Page 114 and 115:
Suggested Specification: Butterfly
Page 116 and 117:
6" - 24" HP350 Mechanical Joint End
Page 118 and 119:
3”-20” 2FII & Groundhog® Bonde
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Triton XR-70,Triton XL & Groundhog
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
24”-48” HP250II Butterfly Valve
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
HP350 Butterfly Valve 6”-24” (M
Page 158 and 159:
HP350 Butterfly Valve Table of Cont
Page 160 and 161:
HP350 Butterfly Valve INSTALLATION
Page 162 and 163:
HP350 Butterfly Valve TESTING When
Page 164 and 165:
HP350 Butterfly Valve WARNING Fluid
Page 166 and 167:
HP350 Butterfly Valve TROUBLESHOOTI
Page 168 and 169:
HP350 Butterfly Valve Cross Section
Page 170 and 171:
Diviner Position Indicator SAFETY M
Page 172 and 173:
Diviner Position Indicator FUNCTION
Page 174 and 175:
Diviner Position Indicator INSTALLA
Page 176 and 177:
Diviner Position Indicator HOW TO C
Page 178 and 179:
PAINT SYSTEM SUMMARY Page 1 of 5 SY
Page 180 and 181:
Page 3 of 5 UL/FM HENRY PRATT COMPA
Page 182:
Page 5 of 5 UL/FM HENRY PRATT COMPA
Page 185 and 186:
A Tradition of Excellence With the
Page 187 and 188:
MANUAL ACTUATORS Spur G
Page 189 and 190:
MANUAL ACTUATORS
Page 191 and 192:
FEATURES & BENEFITS OF THE TRAVELIN
Page 193 and 194:
ACTUATOR EXTENSIONS
Page 195 and 196:
ACTUATOR EXTENSIONS
Page 197 and 198:
ACTUATOR EXTENSIONS
Page 199 and 200:
ACTUATOR EXTENSIONS
Page 201 and 202:
ACTUATOR EXTENSIONS
Page 203 and 204: ACTUATOR EXTENSIONS
Page 205 and 206: ACTUATOR EXTENSIONS
Page 207 and 208: PRATT Henry Pratt Company TITLE: OP
Page 209 and 210: AUMA Data Sheet AUMA Comm No.: A000
Page 213 and 214: GS50.3 GS63.3 GS80.3 GS100.3 GS125.
Page 215 and 216: Dimensions Valve postion indicator
Page 217 and 218: Technical data valve position indic
Page 223 and 224: .
Page 225 and 226: .
Page 227 and 228: .
Page 229 and 230: .
Page 231 and 232: .
Page 233 and 234: . .
Page 235 and 236: . .
Page 237 and 238: .
Page 239 and 240: . .
Page 241 and 242: .
Page 243 and 244: .
Page 245 and 246: .
Page 247 and 248: Anschlusspläne APG Terminal plans
Page 249 and 250: Bevel gearboxes GK 10.2 - GK 40.2 O
Page 253: Bevel gearboxes GK 10.2 - GK 40.2 O
Page 269 and 270: AUMA - wordwide Europe AUMA Riester
Page 271 and 272: AUMA Riester GmbH & Co. KG P.O.Box
Page 273 and 274: Worm gearboxes GS 50.3 - GS 250.3 O
Page 293 and 294: Worm gearboxes GS 50.3 - GS 250.3 .
Page 303 and 304: North American Sales and Service: U
Page 305 and 306:
IQ Electric Motor Actuator Data She
Page 307 and 308:
Page 309 and 310:
Page 313 and 314:
NOT ROTORK SUPPLY X ACTUATOR TERMIN
Page 322 and 323:
PRATT Henry Pratt Company TITLE: OP
Page 324 and 325:
Introduction Rotork’s proven IQ r
Page 326 and 327:
Actuator electrical specification P
Page 328 and 329:
Actuator electrical specification P
Page 330 and 331:
Control specification Interlocks Ex
Page 332 and 333:
Indication options Indication Optio
Page 334 and 335:
Actuator circuit diagram - basic IQ
Page 336 and 337:
Actuator circuit diagrams - number
Page 338 and 339:
Remote control circuits Remote cont
Page 340 and 341:
Analogue control circuits Analogue
Page 342 and 343:
UK head office Rotork Controls Limi
Page 344 and 345:
The Rotork Setting Tool allows actu
Page 347 and 348:
CONTENTS Page 1 Health and Safety 2
Page 349 and 350:
2 Storage 3 Operating your IQ Actua
Page 351 and 352:
5 3.4 Display-Alarm Indication The
Page 353 and 354:
4 Preparing Drive Bush 7 4.1 IQ10 t
Page 355 and 356:
9 Fig. 4.9 Type A Drive Bush in Pos
Page 357 and 358:
11 5.1 Rising Stem Valves - Top Mou
Page 359 and 360:
13 5.7 IQML Adjusting Linear Stroke
Page 361 and 362:
15 6.4 Connecting to Terminals On E
Page 363 and 364:
17 7.2 The Setting Tool Specificati
Page 365 and 366:
19 7.7 Procedure Branch - Crossroad
Page 367 and 368:
21 Viewing the Primary Function Set
Page 369 and 370:
C2 Close Action 23 The actuator can
Page 371 and 372:
tC Torque Value Closing 25 The valu
Page 373 and 374:
LC Set Limit Closed LO Set Limit Op
Page 375 and 376:
Fig. 9 9 Commissioning - Secondary
Page 377 and 378:
SECONDARY FUNCTIONS CONTENTS page 9
Page 379 and 380:
1 Contact S1 - Value r1 Contact S1
Page 381 and 382:
A4 ESD Override Interlocks A5 ESD O
Page 383 and 384:
9.4 Option Extra Indication Contact
Page 385 and 386:
9.6 Option Folomatic Remote Control
Page 387 and 388:
Fd Deadband Adjustment Ft Motion In
Page 389 and 390:
9.8 Bus System Option Pakscan [OP]
Page 391 and 392:
PF Pakscan Remote Auxiliary Input 4
Page 393 and 394:
9.9 Bus System Option Modbus [OP] P
Page 395 and 396:
PF Modbus Remote Auxiliary Input PP
Page 397 and 398:
9.10 Bus System Option Profibus DP
Page 399 and 400:
PF Profibus Remote Auxiliary Input
Page 401 and 402:
9.11 Option DeviceNet PA DeviceNet
Page 403 and 404:
PF DeviceNet Remote Auxiliary Input
Page 405 and 406:
Fd Bus System Deadband Adjustment A
Page 407 and 408:
JO Position in Valve Opening Stroke
Page 409 and 410:
9.16 Default Options [d1] and [d2]
Page 411 and 412:
10 Maintenance, Monitoring and Trou
Page 413 and 414:
10 Maintenance, Monitoring and Trou
Page 415 and 416:
H3 Factors Inhibiting Electrical Op
Page 417 and 418:
H6 Torque Switch Status & IR Settin
Page 419 and 420:
10.2 IrDA Diagnostics & Config. IQ
Page 421 and 422:
BHD Binary, Hexadecimal and Decimal
Page 423 and 424:
If your Rotork actuator has been co
Page 425 and 426:
New Zealand Wellington Agent North
Page 428:
Heading ATTENTION: RED PLASTIC PLUG
show all

33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?