33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...
33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ... 33 12 16.26 - 001-A - Response AAN-ANR Butterfly Valves - Garney ...
401 S. Highland Avenue Aurora, Illinois 60506 P 630-844-4000 F 630-844-4160 www.henrypratt.com Manual Valve Actuator for tag TPS-P1-BFV-2, P2-BFV2, P3-BFV2, P4-BFV2 Valve actuators conform to AWWA Standard C504 and are designed to hold the valve in any intermediate position between full open and fully closed without creeping or fluttering. Actuators are equipped with mechanical stop-limiting devices to prevent overtravel of the disc in the open and closed positions. The buried service MDT actuator has a mechanical stop which will withstand and input torque of 450 ft. lbs at extreme actuator position without damage. Manual Valve worm gear actuator for tag TP-BFV2, BFV3, BFV4 Same as above except of the worm gear type which will withstand input torque of 300 ft. lbs at extreme actuator position without damage. See worm gear technical information. Manual valve worm gear with bevel attachment for tag TPS-YP5-BFV1 See AUMA spec sheet Painting Valve interior and exterior surfaces except for seating shall be coated with two coats of epoxy paint Amercoat 370 in accordance with AWWA C550 and AWWA C504. Coating is NSF-61 approved. Testing Hydrostatic and leakage tests will be conducted in strict accordance with AWWA Standard C504.
HP350 401 S. Highland Avenue Aurora, Illinois 60506-5563 www.henrypratt.com phone: 877.436.7977 fax: 630.844.4160 Scope of Line: Pratt HP350 Butterfly Valve Sizes: 6" through 48" (FL ends) 6" through 24" (MJ ends) Pressure: - 350 psi - 525 shell test Body Styles: - ANSI 250# with 250 drilling Actuation Options: -Nut -Handwheel -Buried Service Features and Benefits: Features Benefits DESIGN AND CONSTRUCTION Higher pressures Working pressures to 350 psi with temperatures to 250˚F Ductile iron valve body 17-4 Stainless steel shaft Ductile iron disc Wide size range and end connections Rubber seat located in body Unique Disc Design Nonmetallic bearings V-type shaft packing Actuators and Accessories Available in sizes 6" through 48" (FL x FL) and 6" through 24" (MJ x MJ) Reduces performance problems related to corrosive buildup in valve body and pipeline Provides more strength, less weight, and greater free-flow area than conventional disc design Prevents galvanic corrosion and provides lower coefficient of friction Self-adjusting, lasts the life of the valve Available with manual traveling nut or worm gear, electric motor or cylinder actuator; plus full range of extensions, indicators, positioners, remote controls and other accessories
- Page 65 and 66: AWWA Butterfly Valves 3" - 20" Engi
- Page 67 and 68: Scope of Line: AWWA In-Plant Rubber
- Page 69 and 70: Features and Benefits: of Pratt Mod
- Page 71 and 72: Dimensional Data: Model 2FII, Flang
- Page 73 and 74: 401 S. Highland Avenue Aurora, Illi
- Page 75 and 76: 3" through 20" Butterfly Valves Sco
- Page 77 and 78: Design Details: Models 511A and 510
- Page 79 and 80: Suggested Specification for the Hen
- Page 81 and 82: Actuator Dimensional Data for Model
- Page 83 and 84: Figure 511 24" - 72" Class 150 B Fl
- Page 85 and 86: PRATT PRODUCT GUIDE Model 2FII Mono
- Page 87 and 88: 401 S. Highland Avenue Aurora, Illi
- Page 89 and 90: A Tradition of Excellence With the
- Page 91 and 92: Scope of Line: Triton XR-70 Butterf
- Page 93 and 94: Design Details: Triton XR-70 Butter
- Page 95 and 96: E-Lok Seat Design Years of Reliable
- Page 97 and 98: Water Flow Characteristics Proven P
- Page 99 and 100: Valve End Types and Dimensions: Mec
- Page 101 and 102: Actuation Traveling Nut Type Manual
- Page 103: 401 S. Highland Avenue Aurora, Illi
- Page 106 and 107: SCOPE OF THE LINE: PRATT HP250II B
- Page 108 and 109: THE HENRY PRATT SEAT ON BODY DESIGN
- Page 110 and 111: HP250II 3"- 20", DUCTILE IRON BODY
- Page 114 and 115: Suggested Specification: Butterfly
- Page 116 and 117: 6" - 24" HP350 Mechanical Joint End
- Page 118 and 119: 3”-20” 2FII & Groundhog® Bonde
- Page 120 and 121: 3”-20” 2FII & Groundhog® Bonde
- Page 122 and 123: 3”-20” 2FII & Groundhog® Bonde
- Page 124 and 125: 3”-20” 2FII & Groundhog® Bonde
- Page 126 and 127: 3”-20” 2FII & Groundhog® Bonde
- Page 128 and 129: 3”-20” 2FII & Groundhog® Bonde
- Page 130 and 131: Triton XR-70,Triton XL & Groundhog
- Page 132 and 133: Triton XR-70,Triton XL & Groundhog
- Page 134 and 135: Triton XR-70,Triton XL & Groundhog
- Page 136 and 137: Triton XR-70,Triton XL & Groundhog
- Page 138 and 139: Triton XR-70,Triton XL & Groundhog
- Page 140 and 141: Triton XR-70,Triton XL & Groundhog
- Page 142 and 143: Triton XR-70,Triton XL & Groundhog
- Page 144 and 145: 24”-48” HP250II Butterfly Valve
- Page 146 and 147: 24”-48” HP250II Butterfly Valve
- Page 148 and 149: 24”-48” HP250II Butterfly Valve
- Page 150 and 151: 24”-48” HP250II Butterfly Valve
- Page 152 and 153: 24”-48” HP250II Butterfly Valve
- Page 154 and 155: 24”-48” HP250II Butterfly Valve
- Page 156 and 157: HP350 Butterfly Valve 6”-24” (M
- Page 158 and 159: HP350 Butterfly Valve Table of Cont
- Page 160 and 161: HP350 Butterfly Valve INSTALLATION
HP350<br />
401 S. Highland Avenue<br />
Aurora, Illinois 60506-5563<br />
www.henrypratt.com<br />
phone: 877.436.7977<br />
fax: 630.844.4160<br />
Scope of Line: Pratt HP350 <strong>Butterfly</strong> Valve<br />
Sizes:<br />
6" through 48"<br />
(FL ends)<br />
6" through 24"<br />
(MJ ends)<br />
Pressure:<br />
- 350 psi<br />
- 525 shell test<br />
Body Styles:<br />
- ANSI 250# with<br />
250 drilling<br />
Actuation<br />
Options:<br />
-Nut<br />
-Handwheel<br />
-Buried Service<br />
Features and Benefits:<br />
Features<br />
Benefits<br />
DESIGN AND CONSTRUCTION<br />
Higher pressures Working pressures to 350<br />
psi with temperatures to<br />
250˚F<br />
Ductile iron valve body<br />
17-4 Stainless steel shaft<br />
Ductile iron disc<br />
Wide size range and<br />
end connections<br />
Rubber seat<br />
located in body<br />
Unique Disc Design<br />
Nonmetallic bearings<br />
V-type shaft packing<br />
Actuators and<br />
Accessories<br />
Available in sizes 6"<br />
through 48" (FL x FL)<br />
and 6" through 24"<br />
(MJ x MJ)<br />
Reduces performance<br />
problems related to<br />
corrosive buildup<br />
in valve body<br />
and pipeline<br />
Provides more<br />
strength, less weight,<br />
and greater free-flow<br />
area than conventional<br />
disc design<br />
Prevents galvanic<br />
corrosion and<br />
provides lower<br />
coefficient of friction<br />
Self-adjusting, lasts<br />
the life of the valve<br />
Available with manual<br />
traveling nut or<br />
worm gear, electric<br />
motor or cylinder<br />
actuator; plus full<br />
range of extensions,<br />
indicators, positioners,<br />
remote controls and<br />
other accessories